|
Problems shifting gears in 92 Jeep wrangler
Hi there,
I have problems shifting gears. It starts out fine, but after a while it gets harder to shift gears, eventually I get stuck in one gear and cannot get out of it. If this happens while I am stationary not even the breaks can keep the jeep from moving forward. The drive train is making a little more noise a high speeds as well. Do I need to change the oil in the tranny, or is this something wrong with the clutch???? Any help with this will be greately appreciated. Thanks |
Re: Problems shifting gears in 92 Jeep wrangler
Are you driving it in 4x4 on tarmac ?
Dave <bgambart@hotmail.com> wrote in message news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... > Hi there, > > I have problems shifting gears. It starts out fine, but after a while > it gets harder to shift gears, eventually I get stuck in one gear and > cannot get out of it. If this happens while I am stationary not even > the breaks can keep the jeep from moving forward. The drive train is > making a little more noise a high speeds as well. Do I need to change > the oil in the tranny, or is this something wrong with the clutch???? > > > Any help with this will be greately appreciated. > Thanks > |
Re: Problems shifting gears in 92 Jeep wrangler
Are you driving it in 4x4 on tarmac ?
Dave <bgambart@hotmail.com> wrote in message news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... > Hi there, > > I have problems shifting gears. It starts out fine, but after a while > it gets harder to shift gears, eventually I get stuck in one gear and > cannot get out of it. If this happens while I am stationary not even > the breaks can keep the jeep from moving forward. The drive train is > making a little more noise a high speeds as well. Do I need to change > the oil in the tranny, or is this something wrong with the clutch???? > > > Any help with this will be greately appreciated. > Thanks > |
Re: Problems shifting gears in 92 Jeep wrangler
Are you driving it in 4x4 on tarmac ?
Dave <bgambart@hotmail.com> wrote in message news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... > Hi there, > > I have problems shifting gears. It starts out fine, but after a while > it gets harder to shift gears, eventually I get stuck in one gear and > cannot get out of it. If this happens while I am stationary not even > the breaks can keep the jeep from moving forward. The drive train is > making a little more noise a high speeds as well. Do I need to change > the oil in the tranny, or is this something wrong with the clutch???? > > > Any help with this will be greately appreciated. > Thanks > |
Re: Problems shifting gears in 92 Jeep wrangler
Are you driving it in 4x4 on tarmac ?
Dave <bgambart@hotmail.com> wrote in message news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... > Hi there, > > I have problems shifting gears. It starts out fine, but after a while > it gets harder to shift gears, eventually I get stuck in one gear and > cannot get out of it. If this happens while I am stationary not even > the breaks can keep the jeep from moving forward. The drive train is > making a little more noise a high speeds as well. Do I need to change > the oil in the tranny, or is this something wrong with the clutch???? > > > Any help with this will be greately appreciated. > Thanks > |
Re: Re: Problems shifting gears in 92 Jeep wrangler
On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
<jeep@_removethisbit_milne.info> wrote: >Are you driving it in 4x4 on tarmac ? > >Dave Good point but I think I would also start by changing tranny fluid as many neglect this. > ><bgambart@hotmail.com> wrote in message >news:1186146158.865744.148820@57g2000hsv.googlegr oups.com... >> Hi there, >> >> I have problems shifting gears. It starts out fine, but after a while >> it gets harder to shift gears, eventually I get stuck in one gear and >> cannot get out of it. If this happens while I am stationary not even >> the breaks can keep the jeep from moving forward. The drive train is >> making a little more noise a high speeds as well. Do I need to change >> the oil in the tranny, or is this something wrong with the clutch???? >> >> >> Any help with this will be greately appreciated. >> Thanks >> > ----------------- TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
<jeep@_removethisbit_milne.info> wrote: >Are you driving it in 4x4 on tarmac ? > >Dave Good point but I think I would also start by changing tranny fluid as many neglect this. > ><bgambart@hotmail.com> wrote in message >news:1186146158.865744.148820@57g2000hsv.googlegr oups.com... >> Hi there, >> >> I have problems shifting gears. It starts out fine, but after a while >> it gets harder to shift gears, eventually I get stuck in one gear and >> cannot get out of it. If this happens while I am stationary not even >> the breaks can keep the jeep from moving forward. The drive train is >> making a little more noise a high speeds as well. Do I need to change >> the oil in the tranny, or is this something wrong with the clutch???? >> >> >> Any help with this will be greately appreciated. >> Thanks >> > ----------------- TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
<jeep@_removethisbit_milne.info> wrote: >Are you driving it in 4x4 on tarmac ? > >Dave Good point but I think I would also start by changing tranny fluid as many neglect this. > ><bgambart@hotmail.com> wrote in message >news:1186146158.865744.148820@57g2000hsv.googlegr oups.com... >> Hi there, >> >> I have problems shifting gears. It starts out fine, but after a while >> it gets harder to shift gears, eventually I get stuck in one gear and >> cannot get out of it. If this happens while I am stationary not even >> the breaks can keep the jeep from moving forward. The drive train is >> making a little more noise a high speeds as well. Do I need to change >> the oil in the tranny, or is this something wrong with the clutch???? >> >> >> Any help with this will be greately appreciated. >> Thanks >> > ----------------- TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne"
<jeep@_removethisbit_milne.info> wrote: >Are you driving it in 4x4 on tarmac ? > >Dave Good point but I think I would also start by changing tranny fluid as many neglect this. > ><bgambart@hotmail.com> wrote in message >news:1186146158.865744.148820@57g2000hsv.googlegr oups.com... >> Hi there, >> >> I have problems shifting gears. It starts out fine, but after a while >> it gets harder to shift gears, eventually I get stuck in one gear and >> cannot get out of it. If this happens while I am stationary not even >> the breaks can keep the jeep from moving forward. The drive train is >> making a little more noise a high speeds as well. Do I need to change >> the oil in the tranny, or is this something wrong with the clutch???? >> >> >> Any help with this will be greately appreciated. >> Thanks >> > ----------------- TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ. "SnoMan" <admin@snoman.com> wrote in message news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... > On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" > <jeep@_removethisbit_milne.info> wrote: > >>Are you driving it in 4x4 on tarmac ? >> >>Dave > > Good point but I think I would also start by changing tranny fluid as > many neglect this. > >> >><bgambart@hotmail.com> wrote in message >>news:1186146158.865744.148820@57g2000hsv.googleg roups.com... >>> Hi there, >>> >>> I have problems shifting gears. It starts out fine, but after a while >>> it gets harder to shift gears, eventually I get stuck in one gear and >>> cannot get out of it. If this happens while I am stationary not even >>> the breaks can keep the jeep from moving forward. The drive train is >>> making a little more noise a high speeds as well. Do I need to change >>> the oil in the tranny, or is this something wrong with the clutch???? >>> >>> >>> Any help with this will be greately appreciated. >>> Thanks >>> >> > ----------------- > TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ. "SnoMan" <admin@snoman.com> wrote in message news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... > On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" > <jeep@_removethisbit_milne.info> wrote: > >>Are you driving it in 4x4 on tarmac ? >> >>Dave > > Good point but I think I would also start by changing tranny fluid as > many neglect this. > >> >><bgambart@hotmail.com> wrote in message >>news:1186146158.865744.148820@57g2000hsv.googleg roups.com... >>> Hi there, >>> >>> I have problems shifting gears. It starts out fine, but after a while >>> it gets harder to shift gears, eventually I get stuck in one gear and >>> cannot get out of it. If this happens while I am stationary not even >>> the breaks can keep the jeep from moving forward. The drive train is >>> making a little more noise a high speeds as well. Do I need to change >>> the oil in the tranny, or is this something wrong with the clutch???? >>> >>> >>> Any help with this will be greately appreciated. >>> Thanks >>> >> > ----------------- > TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ. "SnoMan" <admin@snoman.com> wrote in message news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... > On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" > <jeep@_removethisbit_milne.info> wrote: > >>Are you driving it in 4x4 on tarmac ? >> >>Dave > > Good point but I think I would also start by changing tranny fluid as > many neglect this. > >> >><bgambart@hotmail.com> wrote in message >>news:1186146158.865744.148820@57g2000hsv.googleg roups.com... >>> Hi there, >>> >>> I have problems shifting gears. It starts out fine, but after a while >>> it gets harder to shift gears, eventually I get stuck in one gear and >>> cannot get out of it. If this happens while I am stationary not even >>> the breaks can keep the jeep from moving forward. The drive train is >>> making a little more noise a high speeds as well. Do I need to change >>> the oil in the tranny, or is this something wrong with the clutch???? >>> >>> >>> Any help with this will be greately appreciated. >>> Thanks >>> >> > ----------------- > TheSnoMan.com |
Re: Re: Problems shifting gears in 92 Jeep wrangler
Another easy thing to check is the bell house to engine bolts, freind has
had his come loose twice on his YJ. "SnoMan" <admin@snoman.com> wrote in message news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... > On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" > <jeep@_removethisbit_milne.info> wrote: > >>Are you driving it in 4x4 on tarmac ? >> >>Dave > > Good point but I think I would also start by changing tranny fluid as > many neglect this. > >> >><bgambart@hotmail.com> wrote in message >>news:1186146158.865744.148820@57g2000hsv.googleg roups.com... >>> Hi there, >>> >>> I have problems shifting gears. It starts out fine, but after a while >>> it gets harder to shift gears, eventually I get stuck in one gear and >>> cannot get out of it. If this happens while I am stationary not even >>> the breaks can keep the jeep from moving forward. The drive train is >>> making a little more noise a high speeds as well. Do I need to change >>> the oil in the tranny, or is this something wrong with the clutch???? >>> >>> >>> Any help with this will be greately appreciated. >>> Thanks >>> >> > ----------------- > TheSnoMan.com |
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote: > Another easy thing to check is the bell house to engine bolts, freind has > had his come loose twice on his YJ. > > "SnoMan" <admin@snoman.com> wrote in message > news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >> <jeep@_removethisbit_milne.info> wrote: >> >>> Are you driving it in 4x4 on tarmac ? >>> >>> Dave >> Good point but I think I would also start by changing tranny fluid as >> many neglect this. >> >>> <bgambart@hotmail.com> wrote in message >>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>> Hi there, >>>> >>>> I have problems shifting gears. It starts out fine, but after a while >>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>> cannot get out of it. If this happens while I am stationary not even >>>> the breaks can keep the jeep from moving forward. The drive train is >>>> making a little more noise a high speeds as well. Do I need to change >>>> the oil in the tranny, or is this something wrong with the clutch???? >>>> >>>> >>>> Any help with this will be greately appreciated. >>>> Thanks >>>> >> ----------------- >> TheSnoMan.com > > |
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote: > Another easy thing to check is the bell house to engine bolts, freind has > had his come loose twice on his YJ. > > "SnoMan" <admin@snoman.com> wrote in message > news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >> <jeep@_removethisbit_milne.info> wrote: >> >>> Are you driving it in 4x4 on tarmac ? >>> >>> Dave >> Good point but I think I would also start by changing tranny fluid as >> many neglect this. >> >>> <bgambart@hotmail.com> wrote in message >>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>> Hi there, >>>> >>>> I have problems shifting gears. It starts out fine, but after a while >>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>> cannot get out of it. If this happens while I am stationary not even >>>> the breaks can keep the jeep from moving forward. The drive train is >>>> making a little more noise a high speeds as well. Do I need to change >>>> the oil in the tranny, or is this something wrong with the clutch???? >>>> >>>> >>>> Any help with this will be greately appreciated. >>>> Thanks >>>> >> ----------------- >> TheSnoMan.com > > |
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote: > Another easy thing to check is the bell house to engine bolts, freind has > had his come loose twice on his YJ. > > "SnoMan" <admin@snoman.com> wrote in message > news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >> <jeep@_removethisbit_milne.info> wrote: >> >>> Are you driving it in 4x4 on tarmac ? >>> >>> Dave >> Good point but I think I would also start by changing tranny fluid as >> many neglect this. >> >>> <bgambart@hotmail.com> wrote in message >>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>> Hi there, >>>> >>>> I have problems shifting gears. It starts out fine, but after a while >>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>> cannot get out of it. If this happens while I am stationary not even >>>> the breaks can keep the jeep from moving forward. The drive train is >>>> making a little more noise a high speeds as well. Do I need to change >>>> the oil in the tranny, or is this something wrong with the clutch???? >>>> >>>> >>>> Any help with this will be greately appreciated. >>>> Thanks >>>> >> ----------------- >> TheSnoMan.com > > |
Re: Problems shifting gears in 92 Jeep wrangler
Lets see, there is a tool called a TORQUE WRENCH?
Greg wrote: > Another easy thing to check is the bell house to engine bolts, freind has > had his come loose twice on his YJ. > > "SnoMan" <admin@snoman.com> wrote in message > news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >> <jeep@_removethisbit_milne.info> wrote: >> >>> Are you driving it in 4x4 on tarmac ? >>> >>> Dave >> Good point but I think I would also start by changing tranny fluid as >> many neglect this. >> >>> <bgambart@hotmail.com> wrote in message >>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>> Hi there, >>>> >>>> I have problems shifting gears. It starts out fine, but after a while >>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>> cannot get out of it. If this happens while I am stationary not even >>>> the breaks can keep the jeep from moving forward. The drive train is >>>> making a little more noise a high speeds as well. Do I need to change >>>> the oil in the tranny, or is this something wrong with the clutch???? >>>> >>>> >>>> Any help with this will be greately appreciated. >>>> Thanks >>>> >> ----------------- >> TheSnoMan.com > > |
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me, I've been using thread lock all these years with the torque wrench and all I needed was the wrench. "RoyJ" <spamless@microsoft.net> wrote in message news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net... > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, freind >> has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> |
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me, I've been using thread lock all these years with the torque wrench and all I needed was the wrench. "RoyJ" <spamless@microsoft.net> wrote in message news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net... > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, freind >> has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> |
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me, I've been using thread lock all these years with the torque wrench and all I needed was the wrench. "RoyJ" <spamless@microsoft.net> wrote in message news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net... > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, freind >> has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> |
Re: Problems shifting gears in 92 Jeep wrangler
A torque wrench prevents bolts from coming out now?
I always thought it was for tightening bolts to a certain degree. Silly me, I've been using thread lock all these years with the torque wrench and all I needed was the wrench. "RoyJ" <spamless@microsoft.net> wrote in message news:v80ui.14952$zA4.13530@newsread3.news.pas.eart hlink.net... > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, freind >> has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> |
Re: Problems shifting gears in 92 Jeep wrangler
Man, my torque wrench sure won't fit back there. Maybe for the bottom
ones.... I have also seen and heard of the bell housing coming loose. To the OP, I would change the tranny fluid first, it could be full of water or low or event he wrong kind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) RoyJ wrote: > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, >> freind has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> >> |
Re: Problems shifting gears in 92 Jeep wrangler
Man, my torque wrench sure won't fit back there. Maybe for the bottom
ones.... I have also seen and heard of the bell housing coming loose. To the OP, I would change the tranny fluid first, it could be full of water or low or event he wrong kind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) RoyJ wrote: > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, >> freind has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> >> |
Re: Problems shifting gears in 92 Jeep wrangler
Man, my torque wrench sure won't fit back there. Maybe for the bottom
ones.... I have also seen and heard of the bell housing coming loose. To the OP, I would change the tranny fluid first, it could be full of water or low or event he wrong kind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) RoyJ wrote: > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, >> freind has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> >> |
Re: Problems shifting gears in 92 Jeep wrangler
Man, my torque wrench sure won't fit back there. Maybe for the bottom
ones.... I have also seen and heard of the bell housing coming loose. To the OP, I would change the tranny fluid first, it could be full of water or low or event he wrong kind. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's - Gone to the rust pile... Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) RoyJ wrote: > Lets see, there is a tool called a TORQUE WRENCH? > > Greg wrote: >> Another easy thing to check is the bell house to engine bolts, >> freind has had his come loose twice on his YJ. >> >> "SnoMan" <admin@snoman.com> wrote in message >> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>> <jeep@_removethisbit_milne.info> wrote: >>> >>>> Are you driving it in 4x4 on tarmac ? >>>> >>>> Dave >>> Good point but I think I would also start by changing tranny fluid as >>> many neglect this. >>> >>>> <bgambart@hotmail.com> wrote in message >>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>> Hi there, >>>>> >>>>> I have problems shifting gears. It starts out fine, but after a while >>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>> cannot get out of it. If this happens while I am stationary not even >>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>> making a little more noise a high speeds as well. Do I need to change >>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>> >>>>> >>>>> Any help with this will be greately appreciated. >>>>> Thanks >>>>> >>> ----------------- >>> TheSnoMan.com >> >> |
Re: Problems shifting gears in 92 Jeep wrangler
That's the problem: they don't get tightened correctly.
Mike Romain wrote: > Man, my torque wrench sure won't fit back there. Maybe for the bottom > ones.... I have also seen and heard of the bell housing coming loose. > > To the OP, I would change the tranny fluid first, it could be full of > water or low or event he wrong kind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > RoyJ wrote: >> Lets see, there is a tool called a TORQUE WRENCH? >> >> Greg wrote: >>> Another easy thing to check is the bell house to engine bolts, >>> freind has had his come loose twice on his YJ. >>> >>> "SnoMan" <admin@snoman.com> wrote in message >>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>>> <jeep@_removethisbit_milne.info> wrote: >>>> >>>>> Are you driving it in 4x4 on tarmac ? >>>>> >>>>> Dave >>>> Good point but I think I would also start by changing tranny fluid as >>>> many neglect this. >>>> >>>>> <bgambart@hotmail.com> wrote in message >>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>>> Hi there, >>>>>> >>>>>> I have problems shifting gears. It starts out fine, but after a while >>>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>>> cannot get out of it. If this happens while I am stationary not even >>>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>>> making a little more noise a high speeds as well. Do I need to change >>>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>>> >>>>>> >>>>>> Any help with this will be greately appreciated. >>>>>> Thanks >>>>>> >>>> ----------------- >>>> TheSnoMan.com >>> >>> |
Re: Problems shifting gears in 92 Jeep wrangler
That's the problem: they don't get tightened correctly.
Mike Romain wrote: > Man, my torque wrench sure won't fit back there. Maybe for the bottom > ones.... I have also seen and heard of the bell housing coming loose. > > To the OP, I would change the tranny fluid first, it could be full of > water or low or event he wrong kind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > RoyJ wrote: >> Lets see, there is a tool called a TORQUE WRENCH? >> >> Greg wrote: >>> Another easy thing to check is the bell house to engine bolts, >>> freind has had his come loose twice on his YJ. >>> >>> "SnoMan" <admin@snoman.com> wrote in message >>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>>> <jeep@_removethisbit_milne.info> wrote: >>>> >>>>> Are you driving it in 4x4 on tarmac ? >>>>> >>>>> Dave >>>> Good point but I think I would also start by changing tranny fluid as >>>> many neglect this. >>>> >>>>> <bgambart@hotmail.com> wrote in message >>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>>> Hi there, >>>>>> >>>>>> I have problems shifting gears. It starts out fine, but after a while >>>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>>> cannot get out of it. If this happens while I am stationary not even >>>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>>> making a little more noise a high speeds as well. Do I need to change >>>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>>> >>>>>> >>>>>> Any help with this will be greately appreciated. >>>>>> Thanks >>>>>> >>>> ----------------- >>>> TheSnoMan.com >>> >>> |
Re: Problems shifting gears in 92 Jeep wrangler
That's the problem: they don't get tightened correctly.
Mike Romain wrote: > Man, my torque wrench sure won't fit back there. Maybe for the bottom > ones.... I have also seen and heard of the bell housing coming loose. > > To the OP, I would change the tranny fluid first, it could be full of > water or low or event he wrong kind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > RoyJ wrote: >> Lets see, there is a tool called a TORQUE WRENCH? >> >> Greg wrote: >>> Another easy thing to check is the bell house to engine bolts, >>> freind has had his come loose twice on his YJ. >>> >>> "SnoMan" <admin@snoman.com> wrote in message >>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>>> <jeep@_removethisbit_milne.info> wrote: >>>> >>>>> Are you driving it in 4x4 on tarmac ? >>>>> >>>>> Dave >>>> Good point but I think I would also start by changing tranny fluid as >>>> many neglect this. >>>> >>>>> <bgambart@hotmail.com> wrote in message >>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>>> Hi there, >>>>>> >>>>>> I have problems shifting gears. It starts out fine, but after a while >>>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>>> cannot get out of it. If this happens while I am stationary not even >>>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>>> making a little more noise a high speeds as well. Do I need to change >>>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>>> >>>>>> >>>>>> Any help with this will be greately appreciated. >>>>>> Thanks >>>>>> >>>> ----------------- >>>> TheSnoMan.com >>> >>> |
Re: Problems shifting gears in 92 Jeep wrangler
That's the problem: they don't get tightened correctly.
Mike Romain wrote: > Man, my torque wrench sure won't fit back there. Maybe for the bottom > ones.... I have also seen and heard of the bell housing coming loose. > > To the OP, I would change the tranny fluid first, it could be full of > water or low or event he wrong kind. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's - Gone to the rust pile... > Canadian Off Road Trips Photos: Non members can still view! > Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > (More Off Road album links at bottom of the view page) > > RoyJ wrote: >> Lets see, there is a tool called a TORQUE WRENCH? >> >> Greg wrote: >>> Another easy thing to check is the bell house to engine bolts, >>> freind has had his come loose twice on his YJ. >>> >>> "SnoMan" <admin@snoman.com> wrote in message >>> news:mgu6b3pfubk3qkcoql262eatoa936bmi1a@4ax.com... >>>> On Fri, 03 Aug 2007 15:00:42 GMT, "Dave Milne" >>>> <jeep@_removethisbit_milne.info> wrote: >>>> >>>>> Are you driving it in 4x4 on tarmac ? >>>>> >>>>> Dave >>>> Good point but I think I would also start by changing tranny fluid as >>>> many neglect this. >>>> >>>>> <bgambart@hotmail.com> wrote in message >>>>> news:1186146158.865744.148820@57g2000hsv.googlegro ups.com... >>>>>> Hi there, >>>>>> >>>>>> I have problems shifting gears. It starts out fine, but after a while >>>>>> it gets harder to shift gears, eventually I get stuck in one gear and >>>>>> cannot get out of it. If this happens while I am stationary not even >>>>>> the breaks can keep the jeep from moving forward. The drive train is >>>>>> making a little more noise a high speeds as well. Do I need to change >>>>>> the oil in the tranny, or is this something wrong with the clutch???? >>>>>> >>>>>> >>>>>> Any help with this will be greately appreciated. >>>>>> Thanks >>>>>> >>>> ----------------- >>>> TheSnoMan.com >>> >>> |
| All times are GMT -4. The time now is 07:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands