posi lok
 

hey i think my 95 wrangler with the posi lok is stuck in the lok
position. what are the instructions for the install. how do you
check this? is the 4wd light on the dash switch off this?


thanks

Re: posi lok
 

If your writing about the aftermarket "posilok", try this link
http://www.quadratec.com/Assets/Installation/41982.pdf

Joe

"j" <johnhuebner@yahoo.com> wrote in message
news:1171902881.871039.315090@q2g2000cwa.googlegro ups.com...
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

Re: posi lok
 

If your writing about the aftermarket "posilok", try this link
http://www.quadratec.com/Assets/Installation/41982.pdf

Joe

"j" <johnhuebner@yahoo.com> wrote in message
news:1171902881.871039.315090@q2g2000cwa.googlegro ups.com...
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

Re: posi lok
 

If your writing about the aftermarket "posilok", try this link
http://www.quadratec.com/Assets/Installation/41982.pdf

Joe

"j" <johnhuebner@yahoo.com> wrote in message
news:1171902881.871039.315090@q2g2000cwa.googlegro ups.com...
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

Re: posi lok
 

j wrote:
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

There is no such thing as 'the posi loc' in a stock Jeep.

Do you mean the front axle disconnect? If so, just reach under and see
if you can turn your front driveshaft when it is in 4 high. The shaft
should spin free when the axle is disconnected.

I am not sure on the 95, but some of the 4x4 lights were activated by
the axle lock.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: posi lok
 

j wrote:
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

There is no such thing as 'the posi loc' in a stock Jeep.

Do you mean the front axle disconnect? If so, just reach under and see
if you can turn your front driveshaft when it is in 4 high. The shaft
should spin free when the axle is disconnected.

I am not sure on the 95, but some of the 4x4 lights were activated by
the axle lock.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: posi lok
 

j wrote:
> hey i think my 95 wrangler with the posi lok is stuck in the lok
> position. what are the instructions for the install. how do you
> check this? is the 4wd light on the dash switch off this?
>
>
> thanks
>

There is no such thing as 'the posi loc' in a stock Jeep.

Do you mean the front axle disconnect? If so, just reach under and see
if you can turn your front driveshaft when it is in 4 high. The shaft
should spin free when the axle is disconnected.

I am not sure on the 95, but some of the 4x4 lights were activated by
the axle lock.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: posi lok
 

The '92 and later have the light activated by a switch mounted on the
vacumn motor, '91 and earlier have a vac line to the switch mounted on
the firewall.

Mike Romain wrote:
> j wrote:
>
>> hey i think my 95 wrangler with the posi lok is stuck in the lok
>> position. what are the instructions for the install. how do you
>> check this? is the 4wd light on the dash switch off this?
>>
>>
>> thanks
>>
>
> There is no such thing as 'the posi loc' in a stock Jeep.
>
> Do you mean the front axle disconnect? If so, just reach under and see
> if you can turn your front driveshaft when it is in 4 high. The shaft
> should spin free when the axle is disconnected.
>
> I am not sure on the 95, but some of the 4x4 lights were activated by
> the axle lock.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: posi lok
 

The '92 and later have the light activated by a switch mounted on the
vacumn motor, '91 and earlier have a vac line to the switch mounted on
the firewall.

Mike Romain wrote:
> j wrote:
>
>> hey i think my 95 wrangler with the posi lok is stuck in the lok
>> position. what are the instructions for the install. how do you
>> check this? is the 4wd light on the dash switch off this?
>>
>>
>> thanks
>>
>
> There is no such thing as 'the posi loc' in a stock Jeep.
>
> Do you mean the front axle disconnect? If so, just reach under and see
> if you can turn your front driveshaft when it is in 4 high. The shaft
> should spin free when the axle is disconnected.
>
> I am not sure on the 95, but some of the 4x4 lights were activated by
> the axle lock.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: posi lok
 

The '92 and later have the light activated by a switch mounted on the
vacumn motor, '91 and earlier have a vac line to the switch mounted on
the firewall.

Mike Romain wrote:
> j wrote:
>
>> hey i think my 95 wrangler with the posi lok is stuck in the lok
>> position. what are the instructions for the install. how do you
>> check this? is the 4wd light on the dash switch off this?
>>
>>
>> thanks
>>
>
> There is no such thing as 'the posi loc' in a stock Jeep.
>
> Do you mean the front axle disconnect? If so, just reach under and see
> if you can turn your front driveshaft when it is in 4 high. The shaft
> should spin free when the axle is disconnected.
>
> I am not sure on the 95, but some of the 4x4 lights were activated by
> the axle lock.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)