Paint for side bars
 

Have a Jeep Wrangler with the nurf bars starting to rust. They are
originally painted with a black powder coat. If I repaint them, what would
be the best type of paint to use? I was thinking of using an epoxy primer
with acrylic enamel. Any opinions? Also is there any way of removing the
plastic slip pad with out destroying it? They are Westin bars.
Thanks for any advice.

Regards,
Dennis

Re: Paint for side bars
 

Herculiner, just be sure you keep it off your hootus..


"Dennis" <dennis@comcast.net> wrote in message
news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
> Have a Jeep Wrangler with the nurf bars starting to rust. They are
> originally painted with a black powder coat. If I repaint them, what would
> be the best type of paint to use? I was thinking of using an epoxy primer
> with acrylic enamel. Any opinions? Also is there any way of removing the
> plastic slip pad with out destroying it? They are Westin bars.
> Thanks for any advice.
>
> Regards,
> Dennis
>

Re: Paint for side bars
 

Herculiner, just be sure you keep it off your hootus..


"Dennis" <dennis@comcast.net> wrote in message
news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
> Have a Jeep Wrangler with the nurf bars starting to rust. They are
> originally painted with a black powder coat. If I repaint them, what would
> be the best type of paint to use? I was thinking of using an epoxy primer
> with acrylic enamel. Any opinions? Also is there any way of removing the
> plastic slip pad with out destroying it? They are Westin bars.
> Thanks for any advice.
>
> Regards,
> Dennis
>

Re: Paint for side bars
 

Herculiner, just be sure you keep it off your hootus..


"Dennis" <dennis@comcast.net> wrote in message
news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
> Have a Jeep Wrangler with the nurf bars starting to rust. They are
> originally painted with a black powder coat. If I repaint them, what would
> be the best type of paint to use? I was thinking of using an epoxy primer
> with acrylic enamel. Any opinions? Also is there any way of removing the
> plastic slip pad with out destroying it? They are Westin bars.
> Thanks for any advice.
>
> Regards,
> Dennis
>

Re: Paint for side bars
 

ROTFLMAO!!!!!!


On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net> wrote:

>>Herculiner, just be sure you keep it off your hootus..
>>
>>
>>"Dennis" <dennis@comcast.net> wrote in message
>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>> originally painted with a black powder coat. If I repaint them, what would
>>> be the best type of paint to use? I was thinking of using an epoxy primer
>>> with acrylic enamel. Any opinions? Also is there any way of removing the
>>> plastic slip pad with out destroying it? They are Westin bars.
>>> Thanks for any advice.
>>>
>>> Regards,
>>> Dennis
>>>
>>
>>

Re: Paint for side bars
 

ROTFLMAO!!!!!!


On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net> wrote:

>>Herculiner, just be sure you keep it off your hootus..
>>
>>
>>"Dennis" <dennis@comcast.net> wrote in message
>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>> originally painted with a black powder coat. If I repaint them, what would
>>> be the best type of paint to use? I was thinking of using an epoxy primer
>>> with acrylic enamel. Any opinions? Also is there any way of removing the
>>> plastic slip pad with out destroying it? They are Westin bars.
>>> Thanks for any advice.
>>>
>>> Regards,
>>> Dennis
>>>
>>
>>

Re: Paint for side bars
 

ROTFLMAO!!!!!!


On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net> wrote:

>>Herculiner, just be sure you keep it off your hootus..
>>
>>
>>"Dennis" <dennis@comcast.net> wrote in message
>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>> originally painted with a black powder coat. If I repaint them, what would
>>> be the best type of paint to use? I was thinking of using an epoxy primer
>>> with acrylic enamel. Any opinions? Also is there any way of removing the
>>> plastic slip pad with out destroying it? They are Westin bars.
>>> Thanks for any advice.
>>>
>>> Regards,
>>> Dennis
>>>
>>
>>

Re: Paint for side bars
 

Duplicolor Truck Bed Coating How-To Video.
Note: Required ActiveX

http://www.duplicolor.com/training/t..._training.html


"jbjeep" <jbjeep@saw.net> wrote in message
news:kl7u925vc5b25ocd963kh15ibo8a2ris9e@4ax.com...
> ROTFLMAO!!!!!!
>
>
> On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net>
> wrote:
>
>>>Herculiner, just be sure you keep it off your hootus..
>>>
>>>
>>>"Dennis" <dennis@comcast.net> wrote in message
>>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>>> originally painted with a black powder coat. If I repaint them, what
>>>> would
>>>> be the best type of paint to use? I was thinking of using an epoxy
>>>> primer
>>>> with acrylic enamel. Any opinions? Also is there any way of removing
>>>> the
>>>> plastic slip pad with out destroying it? They are Westin bars.
>>>> Thanks for any advice.
>>>>
>>>> Regards,
>>>> Dennis
>>>>
>>>
>>>

Re: Paint for side bars
 

Duplicolor Truck Bed Coating How-To Video.
Note: Required ActiveX

http://www.duplicolor.com/training/t..._training.html


"jbjeep" <jbjeep@saw.net> wrote in message
news:kl7u925vc5b25ocd963kh15ibo8a2ris9e@4ax.com...
> ROTFLMAO!!!!!!
>
>
> On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net>
> wrote:
>
>>>Herculiner, just be sure you keep it off your hootus..
>>>
>>>
>>>"Dennis" <dennis@comcast.net> wrote in message
>>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>>> originally painted with a black powder coat. If I repaint them, what
>>>> would
>>>> be the best type of paint to use? I was thinking of using an epoxy
>>>> primer
>>>> with acrylic enamel. Any opinions? Also is there any way of removing
>>>> the
>>>> plastic slip pad with out destroying it? They are Westin bars.
>>>> Thanks for any advice.
>>>>
>>>> Regards,
>>>> Dennis
>>>>
>>>
>>>

Re: Paint for side bars
 

Duplicolor Truck Bed Coating How-To Video.
Note: Required ActiveX

http://www.duplicolor.com/training/t..._training.html


"jbjeep" <jbjeep@saw.net> wrote in message
news:kl7u925vc5b25ocd963kh15ibo8a2ris9e@4ax.com...
> ROTFLMAO!!!!!!
>
>
> On Sun, 25 Jun 2006 18:59:25 -0400, "billy ray" <billy_ray@SPAMfuse.net>
> wrote:
>
>>>Herculiner, just be sure you keep it off your hootus..
>>>
>>>
>>>"Dennis" <dennis@comcast.net> wrote in message
>>>news:za6dnQ5U9-v1ngLZnZ2dnUVZ_radnZ2d@comcast.com...
>>>> Have a Jeep Wrangler with the nurf bars starting to rust. They are
>>>> originally painted with a black powder coat. If I repaint them, what
>>>> would
>>>> be the best type of paint to use? I was thinking of using an epoxy
>>>> primer
>>>> with acrylic enamel. Any opinions? Also is there any way of removing
>>>> the
>>>> plastic slip pad with out destroying it? They are Westin bars.
>>>> Thanks for any advice.
>>>>
>>>> Regards,
>>>> Dennis
>>>>
>>>
>>>