Overheating cured !! / New Question !!
Several months ago, I reported about my 2000 JGC overheating at very high speeds or when climbing a long hill. Many good ideas and advice was offered, but I think the concensus was that I needed to replace the radiator. I have now done this, and it indeed fully cured the problem !! Thanks for all the help on this one. Further back, I also reported a problem with this same Jeep with what I thought was front-end problems and looseness of some sort when going down gravel roads or other rough road surfaces. As some here suggested, my mechanic checked all sorts of front-end items such as tie-rod ends, ball joints, and the like. At first, I thought that some oscillation was set up in my front end, that was then transmitted into my steering column and made it rattle and jerk like crazy when I go over rough roads. However, after studying and watching this steering reaction more closely, I can now better describe this rattling/clunking as actually being right in my steering column itself. In other words, and I actually hear this clunking and rattling (quite loud and severe) right in my steering column. I repeat, that this is a very pronounced looseness and jerking, it is strong enough that it feels like my steering wheel might fall off !! As a non-mechanic, I wonder if the gears in my steering box have worn down, allowing the oscillation to take place in the steering column ? I am told that it is a sealed unit, so if that is the case, I don't know how one would check for it. By the way, at the suggestion of someone here, my mechanic checked the bolts that hold the steering box to the frame were tight and secure, and they are. Any ideas on this malady ??? Thanks again for the good advice here !!! James |
Re: Overheating cured !! / New Question !!
I haven't inspects a JGC so don't know for sure, but the other Jeeps use
a universal joint or two in the steering column shaft. These are not serviceable and do go bad in time. Other than that I have always been able to find the slop by watching the movement carefully. It takes two people, one to wiggle the steering wheel and one to watch or touch. The sense of touch can feel a part like the pitman arm on the bottom of the steering box start to move while the eyes watch the shaft going into it to see if there is slop, etc... The joint in a tilt steering can get sloppy to. Same deal watch and rock the steering. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) James wrote: > Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. > > > Further back, I also reported a problem with this same Jeep with what I > thought was front-end problems and looseness of some sort when going down > gravel roads or other rough road surfaces. As some here suggested, my > mechanic checked all sorts of front-end items such as tie-rod ends, ball > joints, and the like. > > > At first, I thought that some oscillation was set up in my front end, that > was then transmitted into my steering column and made it rattle and jerk > like crazy when I go over rough roads. However, after studying and > watching this steering reaction more closely, I can now better describe this > rattling/clunking as actually being right in my steering column itself. In > other words, and I actually hear this clunking and rattling (quite loud and > severe) right in my steering column. I repeat, that this is a very > pronounced looseness and jerking, it is strong enough that it feels like my > steering wheel might fall off !! > > As a non-mechanic, I wonder if the gears in my steering box have worn down, > allowing the oscillation to take place in the steering column ? I am told > that it is a sealed unit, so if that is the case, I don't know how one would > check for it. By the way, at the suggestion of someone here, my mechanic > checked the bolts that hold the steering box to the frame were tight and > secure, and they are. > > Any ideas on this malady ??? > > Thanks again for the good advice here !!! > > > James > > > |
Re: Overheating cured !! / New Question !!
I haven't inspects a JGC so don't know for sure, but the other Jeeps use
a universal joint or two in the steering column shaft. These are not serviceable and do go bad in time. Other than that I have always been able to find the slop by watching the movement carefully. It takes two people, one to wiggle the steering wheel and one to watch or touch. The sense of touch can feel a part like the pitman arm on the bottom of the steering box start to move while the eyes watch the shaft going into it to see if there is slop, etc... The joint in a tilt steering can get sloppy to. Same deal watch and rock the steering. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) James wrote: > Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. > > > Further back, I also reported a problem with this same Jeep with what I > thought was front-end problems and looseness of some sort when going down > gravel roads or other rough road surfaces. As some here suggested, my > mechanic checked all sorts of front-end items such as tie-rod ends, ball > joints, and the like. > > > At first, I thought that some oscillation was set up in my front end, that > was then transmitted into my steering column and made it rattle and jerk > like crazy when I go over rough roads. However, after studying and > watching this steering reaction more closely, I can now better describe this > rattling/clunking as actually being right in my steering column itself. In > other words, and I actually hear this clunking and rattling (quite loud and > severe) right in my steering column. I repeat, that this is a very > pronounced looseness and jerking, it is strong enough that it feels like my > steering wheel might fall off !! > > As a non-mechanic, I wonder if the gears in my steering box have worn down, > allowing the oscillation to take place in the steering column ? I am told > that it is a sealed unit, so if that is the case, I don't know how one would > check for it. By the way, at the suggestion of someone here, my mechanic > checked the bolts that hold the steering box to the frame were tight and > secure, and they are. > > Any ideas on this malady ??? > > Thanks again for the good advice here !!! > > > James > > > |
Re: Overheating cured !! / New Question !!
I haven't inspects a JGC so don't know for sure, but the other Jeeps use
a universal joint or two in the steering column shaft. These are not serviceable and do go bad in time. Other than that I have always been able to find the slop by watching the movement carefully. It takes two people, one to wiggle the steering wheel and one to watch or touch. The sense of touch can feel a part like the pitman arm on the bottom of the steering box start to move while the eyes watch the shaft going into it to see if there is slop, etc... The joint in a tilt steering can get sloppy to. Same deal watch and rock the steering. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) James wrote: > Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. > > > Further back, I also reported a problem with this same Jeep with what I > thought was front-end problems and looseness of some sort when going down > gravel roads or other rough road surfaces. As some here suggested, my > mechanic checked all sorts of front-end items such as tie-rod ends, ball > joints, and the like. > > > At first, I thought that some oscillation was set up in my front end, that > was then transmitted into my steering column and made it rattle and jerk > like crazy when I go over rough roads. However, after studying and > watching this steering reaction more closely, I can now better describe this > rattling/clunking as actually being right in my steering column itself. In > other words, and I actually hear this clunking and rattling (quite loud and > severe) right in my steering column. I repeat, that this is a very > pronounced looseness and jerking, it is strong enough that it feels like my > steering wheel might fall off !! > > As a non-mechanic, I wonder if the gears in my steering box have worn down, > allowing the oscillation to take place in the steering column ? I am told > that it is a sealed unit, so if that is the case, I don't know how one would > check for it. By the way, at the suggestion of someone here, my mechanic > checked the bolts that hold the steering box to the frame were tight and > secure, and they are. > > Any ideas on this malady ??? > > Thanks again for the good advice here !!! > > > James > > > |
Re: Overheating cured !! / New Question !!
I haven't inspects a JGC so don't know for sure, but the other Jeeps use
a universal joint or two in the steering column shaft. These are not serviceable and do go bad in time. Other than that I have always been able to find the slop by watching the movement carefully. It takes two people, one to wiggle the steering wheel and one to watch or touch. The sense of touch can feel a part like the pitman arm on the bottom of the steering box start to move while the eyes watch the shaft going into it to see if there is slop, etc... The joint in a tilt steering can get sloppy to. Same deal watch and rock the steering. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) James wrote: > Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. > > > Further back, I also reported a problem with this same Jeep with what I > thought was front-end problems and looseness of some sort when going down > gravel roads or other rough road surfaces. As some here suggested, my > mechanic checked all sorts of front-end items such as tie-rod ends, ball > joints, and the like. > > > At first, I thought that some oscillation was set up in my front end, that > was then transmitted into my steering column and made it rattle and jerk > like crazy when I go over rough roads. However, after studying and > watching this steering reaction more closely, I can now better describe this > rattling/clunking as actually being right in my steering column itself. In > other words, and I actually hear this clunking and rattling (quite loud and > severe) right in my steering column. I repeat, that this is a very > pronounced looseness and jerking, it is strong enough that it feels like my > steering wheel might fall off !! > > As a non-mechanic, I wonder if the gears in my steering box have worn down, > allowing the oscillation to take place in the steering column ? I am told > that it is a sealed unit, so if that is the case, I don't know how one would > check for it. By the way, at the suggestion of someone here, my mechanic > checked the bolts that hold the steering box to the frame were tight and > secure, and they are. > > Any ideas on this malady ??? > > Thanks again for the good advice here !!! > > > James > > > |
Re: Overheating cured !! / New Question !!
Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to find someone with experience in working on the steering column, and I also know the importance of the mechanic being totally familiar with the air bag in the steering wheel. I will look out for further comments on this problem....... I do wish that I could find a cure. James |
Re: Overheating cured !! / New Question !!
Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to find someone with experience in working on the steering column, and I also know the importance of the mechanic being totally familiar with the air bag in the steering wheel. I will look out for further comments on this problem....... I do wish that I could find a cure. James |
Re: Overheating cured !! / New Question !!
Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to find someone with experience in working on the steering column, and I also know the importance of the mechanic being totally familiar with the air bag in the steering wheel. I will look out for further comments on this problem....... I do wish that I could find a cure. James |
Re: Overheating cured !! / New Question !!
Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to find someone with experience in working on the steering column, and I also know the importance of the mechanic being totally familiar with the air bag in the steering wheel. I will look out for further comments on this problem....... I do wish that I could find a cure. James |
Re: Overheating cured !! / New Question !!
James wrote:
> Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to > find someone with experience in working on the steering column, and I also > know the importance of the mechanic being totally familiar with the air bag > in the steering wheel. > > I will look out for further comments on this problem....... I do wish that > I could find a cure. > > James > > If your track bar bushing has gone bad, it can cause a bad odd shake in the steering. To check that, you sit in the drivers seat very still and line your eye up with the hood crease and a spot on the ground or a tree or something. You then have the engine running and turn the steering wheel side to side. If the spot on the ground moves with the steering, check the bushing. The steering is only supposed to move the wheels, not the nose of the Jeep. The bushing is on the passenger side where a big bar hooks up that goes to the frame on the drivers side. If bad, you will see movement in this connection when someone turns the steering back and forth while you go under and look. It's other end on the frame has a ball joint which can go bad too, but the bushing is first usually. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Overheating cured !! / New Question !!
James wrote:
> Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to > find someone with experience in working on the steering column, and I also > know the importance of the mechanic being totally familiar with the air bag > in the steering wheel. > > I will look out for further comments on this problem....... I do wish that > I could find a cure. > > James > > If your track bar bushing has gone bad, it can cause a bad odd shake in the steering. To check that, you sit in the drivers seat very still and line your eye up with the hood crease and a spot on the ground or a tree or something. You then have the engine running and turn the steering wheel side to side. If the spot on the ground moves with the steering, check the bushing. The steering is only supposed to move the wheels, not the nose of the Jeep. The bushing is on the passenger side where a big bar hooks up that goes to the frame on the drivers side. If bad, you will see movement in this connection when someone turns the steering back and forth while you go under and look. It's other end on the frame has a ball joint which can go bad too, but the bushing is first usually. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Overheating cured !! / New Question !!
James wrote:
> Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to > find someone with experience in working on the steering column, and I also > know the importance of the mechanic being totally familiar with the air bag > in the steering wheel. > > I will look out for further comments on this problem....... I do wish that > I could find a cure. > > James > > If your track bar bushing has gone bad, it can cause a bad odd shake in the steering. To check that, you sit in the drivers seat very still and line your eye up with the hood crease and a spot on the ground or a tree or something. You then have the engine running and turn the steering wheel side to side. If the spot on the ground moves with the steering, check the bushing. The steering is only supposed to move the wheels, not the nose of the Jeep. The bushing is on the passenger side where a big bar hooks up that goes to the frame on the drivers side. If bad, you will see movement in this connection when someone turns the steering back and forth while you go under and look. It's other end on the frame has a ball joint which can go bad too, but the bushing is first usually. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Overheating cured !! / New Question !!
James wrote:
> Thanks Mike !! Yes, this is a tilt steering wheel. I think that I need to > find someone with experience in working on the steering column, and I also > know the importance of the mechanic being totally familiar with the air bag > in the steering wheel. > > I will look out for further comments on this problem....... I do wish that > I could find a cure. > > James > > If your track bar bushing has gone bad, it can cause a bad odd shake in the steering. To check that, you sit in the drivers seat very still and line your eye up with the hood crease and a spot on the ground or a tree or something. You then have the engine running and turn the steering wheel side to side. If the spot on the ground moves with the steering, check the bushing. The steering is only supposed to move the wheels, not the nose of the Jeep. The bushing is on the passenger side where a big bar hooks up that goes to the frame on the drivers side. If bad, you will see movement in this connection when someone turns the steering back and forth while you go under and look. It's other end on the frame has a ball joint which can go bad too, but the bushing is first usually. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Overheating cured !! / New Question !!
James wrote:
> Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. I'm getting overheat problems, too. My water is moving in the radiator, and turning on the heat makes the level in the overflow bottle drop. My radiator has a lot of scale in it and the air coming off doesn't seem very hot. Looks like I'm due for a radiator after 10 years... -Scott '97 TJ SE |
Re: Overheating cured !! / New Question !!
James wrote:
> Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. I'm getting overheat problems, too. My water is moving in the radiator, and turning on the heat makes the level in the overflow bottle drop. My radiator has a lot of scale in it and the air coming off doesn't seem very hot. Looks like I'm due for a radiator after 10 years... -Scott '97 TJ SE |
Re: Overheating cured !! / New Question !!
James wrote:
> Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. I'm getting overheat problems, too. My water is moving in the radiator, and turning on the heat makes the level in the overflow bottle drop. My radiator has a lot of scale in it and the air coming off doesn't seem very hot. Looks like I'm due for a radiator after 10 years... -Scott '97 TJ SE |
Re: Overheating cured !! / New Question !!
James wrote:
> Several months ago, I reported about my 2000 JGC overheating at very high > speeds or when climbing a long hill. Many good ideas and advice was > offered, but I think the concensus was that I needed to replace the > radiator. I have now done this, and it indeed fully cured the problem !! > Thanks for all the help on this one. I'm getting overheat problems, too. My water is moving in the radiator, and turning on the heat makes the level in the overflow bottle drop. My radiator has a lot of scale in it and the air coming off doesn't seem very hot. Looks like I'm due for a radiator after 10 years... -Scott '97 TJ SE |
Re: Overheating cured !! / New Question !!
Scott, on my radiator, is was flowing water on one side of the radiator
only. One full side was totally blocked !! So, the Jeep was operating on 1/2 of a radiator, and that is why it would heat up under severe strain. Mike, good idea about checking the bushing in the track bar. I will look at that !! Thanks !! James |
Re: Overheating cured !! / New Question !!
Scott, on my radiator, is was flowing water on one side of the radiator
only. One full side was totally blocked !! So, the Jeep was operating on 1/2 of a radiator, and that is why it would heat up under severe strain. Mike, good idea about checking the bushing in the track bar. I will look at that !! Thanks !! James |
Re: Overheating cured !! / New Question !!
Scott, on my radiator, is was flowing water on one side of the radiator
only. One full side was totally blocked !! So, the Jeep was operating on 1/2 of a radiator, and that is why it would heat up under severe strain. Mike, good idea about checking the bushing in the track bar. I will look at that !! Thanks !! James |
Re: Overheating cured !! / New Question !!
Scott, on my radiator, is was flowing water on one side of the radiator
only. One full side was totally blocked !! So, the Jeep was operating on 1/2 of a radiator, and that is why it would heat up under severe strain. Mike, good idea about checking the bushing in the track bar. I will look at that !! Thanks !! James |
Re: Overheating cured !! / New Question !!
It may not be easy on that Jeep but with the engine hot if you run your
hand over the radiator you may feel hot and cool spots, that is a sure sign the radiator has blockages. It should feel pretty much the same temperature all over. Jeff DeWitt Scott in Baltimore wrote: > James wrote: > >> Several months ago, I reported about my 2000 JGC overheating at very >> high speeds or when climbing a long hill. Many good ideas and advice >> was offered, but I think the concensus was that I needed to replace >> the radiator. I have now done this, and it indeed fully cured the >> problem !! Thanks for all the help on this one. > > > > I'm getting overheat problems, too. My water is moving in the radiator, and > turning on the heat makes the level in the overflow bottle drop. My > radiator > has a lot of scale in it and the air coming off doesn't seem very hot. > Looks > like I'm due for a radiator after 10 years... > > -Scott > '97 TJ SE |
Re: Overheating cured !! / New Question !!
It may not be easy on that Jeep but with the engine hot if you run your
hand over the radiator you may feel hot and cool spots, that is a sure sign the radiator has blockages. It should feel pretty much the same temperature all over. Jeff DeWitt Scott in Baltimore wrote: > James wrote: > >> Several months ago, I reported about my 2000 JGC overheating at very >> high speeds or when climbing a long hill. Many good ideas and advice >> was offered, but I think the concensus was that I needed to replace >> the radiator. I have now done this, and it indeed fully cured the >> problem !! Thanks for all the help on this one. > > > > I'm getting overheat problems, too. My water is moving in the radiator, and > turning on the heat makes the level in the overflow bottle drop. My > radiator > has a lot of scale in it and the air coming off doesn't seem very hot. > Looks > like I'm due for a radiator after 10 years... > > -Scott > '97 TJ SE |
Re: Overheating cured !! / New Question !!
It may not be easy on that Jeep but with the engine hot if you run your
hand over the radiator you may feel hot and cool spots, that is a sure sign the radiator has blockages. It should feel pretty much the same temperature all over. Jeff DeWitt Scott in Baltimore wrote: > James wrote: > >> Several months ago, I reported about my 2000 JGC overheating at very >> high speeds or when climbing a long hill. Many good ideas and advice >> was offered, but I think the concensus was that I needed to replace >> the radiator. I have now done this, and it indeed fully cured the >> problem !! Thanks for all the help on this one. > > > > I'm getting overheat problems, too. My water is moving in the radiator, and > turning on the heat makes the level in the overflow bottle drop. My > radiator > has a lot of scale in it and the air coming off doesn't seem very hot. > Looks > like I'm due for a radiator after 10 years... > > -Scott > '97 TJ SE |
Re: Overheating cured !! / New Question !!
It may not be easy on that Jeep but with the engine hot if you run your
hand over the radiator you may feel hot and cool spots, that is a sure sign the radiator has blockages. It should feel pretty much the same temperature all over. Jeff DeWitt Scott in Baltimore wrote: > James wrote: > >> Several months ago, I reported about my 2000 JGC overheating at very >> high speeds or when climbing a long hill. Many good ideas and advice >> was offered, but I think the concensus was that I needed to replace >> the radiator. I have now done this, and it indeed fully cured the >> problem !! Thanks for all the help on this one. > > > > I'm getting overheat problems, too. My water is moving in the radiator, and > turning on the heat makes the level in the overflow bottle drop. My > radiator > has a lot of scale in it and the air coming off doesn't seem very hot. > Looks > like I'm due for a radiator after 10 years... > > -Scott > '97 TJ SE |
Re: Overheating cured !! / New Question !!
thanks for reporting back on that.
D |
Re: Overheating cured !! / New Question !!
thanks for reporting back on that.
D |
Re: Overheating cured !! / New Question !!
thanks for reporting back on that.
D |
Re: Overheating cured !! / New Question !!
thanks for reporting back on that.
D |
Re: Overheating cured !! / New Question !!
On Sat, 02 Jun 2007 09:09:30 -0400 in
<46616bd3$0$6292$9a6e19ea@unlimited.newshosting.co m>, Mike Romain <romainm@sympatico.ca> graced the world with this thought: > other Jeeps use >a universal joint or two in the steering column shaft. These are not >serviceable and do go bad in time. And let me assure you, it's a real treat to have one break when you're 40 miles up a dirt road. What a ----ed up day that was--but not as ----ed up as it would've been if had broken on the freeway going 70 as opposed to on a dirt road going 10 mph. |
Re: Overheating cured !! / New Question !!
On Sat, 02 Jun 2007 09:09:30 -0400 in
<46616bd3$0$6292$9a6e19ea@unlimited.newshosting.co m>, Mike Romain <romainm@sympatico.ca> graced the world with this thought: > other Jeeps use >a universal joint or two in the steering column shaft. These are not >serviceable and do go bad in time. And let me assure you, it's a real treat to have one break when you're 40 miles up a dirt road. What a ----ed up day that was--but not as ----ed up as it would've been if had broken on the freeway going 70 as opposed to on a dirt road going 10 mph. |
Re: Overheating cured !! / New Question !!
On Sat, 02 Jun 2007 09:09:30 -0400 in
<46616bd3$0$6292$9a6e19ea@unlimited.newshosting.co m>, Mike Romain <romainm@sympatico.ca> graced the world with this thought: > other Jeeps use >a universal joint or two in the steering column shaft. These are not >serviceable and do go bad in time. And let me assure you, it's a real treat to have one break when you're 40 miles up a dirt road. What a ----ed up day that was--but not as ----ed up as it would've been if had broken on the freeway going 70 as opposed to on a dirt road going 10 mph. |
Re: Overheating cured !! / New Question !!
On Sat, 02 Jun 2007 09:09:30 -0400 in
<46616bd3$0$6292$9a6e19ea@unlimited.newshosting.co m>, Mike Romain <romainm@sympatico.ca> graced the world with this thought: > other Jeeps use >a universal joint or two in the steering column shaft. These are not >serviceable and do go bad in time. And let me assure you, it's a real treat to have one break when you're 40 miles up a dirt road. What a ----ed up day that was--but not as ----ed up as it would've been if had broken on the freeway going 70 as opposed to on a dirt road going 10 mph. |
All times are GMT -4. The time now is 03:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands