OT, air horns
So I'm goofing around in the shop, and I have this set of P-3 Nathan Airchimes from a diesel locomotive, just sitting on the shelf collecting dust. I start looking at my Goldwing. Now, there was no beer involved, but neverless, something weird happened. This thing is really fun. One of my friends was riding by in the opposite direction yesterday and i gave him a little toot. He said he damn near fell off of his bike laughing. http://home.goldrush.com/obsoelyt/Horn1.jpg http://home.goldrush.com/obsoelyt/Horn2.jpg http://home.goldrush.com/obsoelyt/Horn3.jpg http://home.goldrush.com/obsoelyt/Horn4.jpg http://home.goldrush.com/obsoelyt/Horn5.jpg I haven't recorded them, but here is recording of another P-3 http://www.dieselairhorns.com/sounds/p3_SSW8065_OC.mp3 Here’s some other uh, colorful deaf people. http://www.dieselairhorns.com/trucks.html -- Paul Calman, Hathaway Pines, California |
Re: OT, air horns
How are they powered ? I thought horns that big required onboard air or 24V
supply at least ? Dave Milne, Scotland '91 Grand Wagoneer, '99 TJ "Paul Calman" <spam@trap.com> wrote in message news:3bktoiF6ifneqU1@individual.net... > > So I'm goofing around in the shop, and I have this set of P-3 Nathan > Airchimes from a diesel locomotive, just sitting on the shelf collecting > dust. I start looking at my Goldwing. Now, there was no beer involved, but > neverless, something weird happened. This thing is really fun. One of my > friends was riding by in the opposite direction yesterday and i gave him a > little toot. He said he damn near fell off of his bike laughing. > http://home.goldrush.com/obsoelyt/Horn1.jpg > http://home.goldrush.com/obsoelyt/Horn2.jpg > http://home.goldrush.com/obsoelyt/Horn3.jpg > http://home.goldrush.com/obsoelyt/Horn4.jpg > http://home.goldrush.com/obsoelyt/Horn5.jpg > > > > I haven't recorded them, but here is recording of another P-3 > > http://www.dieselairhorns.com/sounds/p3_SSW8065_OC.mp3 > > Here's some other uh, colorful deaf people. > > http://www.dieselairhorns.com/trucks.html > -- > Paul Calman, Hathaway Pines, California > > |
Re: OT, air horns
How are they powered ? I thought horns that big required onboard air or 24V
supply at least ? Dave Milne, Scotland '91 Grand Wagoneer, '99 TJ "Paul Calman" <spam@trap.com> wrote in message news:3bktoiF6ifneqU1@individual.net... > > So I'm goofing around in the shop, and I have this set of P-3 Nathan > Airchimes from a diesel locomotive, just sitting on the shelf collecting > dust. I start looking at my Goldwing. Now, there was no beer involved, but > neverless, something weird happened. This thing is really fun. One of my > friends was riding by in the opposite direction yesterday and i gave him a > little toot. He said he damn near fell off of his bike laughing. > http://home.goldrush.com/obsoelyt/Horn1.jpg > http://home.goldrush.com/obsoelyt/Horn2.jpg > http://home.goldrush.com/obsoelyt/Horn3.jpg > http://home.goldrush.com/obsoelyt/Horn4.jpg > http://home.goldrush.com/obsoelyt/Horn5.jpg > > > > I haven't recorded them, but here is recording of another P-3 > > http://www.dieselairhorns.com/sounds/p3_SSW8065_OC.mp3 > > Here's some other uh, colorful deaf people. > > http://www.dieselairhorns.com/trucks.html > -- > Paul Calman, Hathaway Pines, California > > |
Re: OT, air horns
How are they powered ? I thought horns that big required onboard air or 24V
supply at least ? Dave Milne, Scotland '91 Grand Wagoneer, '99 TJ "Paul Calman" <spam@trap.com> wrote in message news:3bktoiF6ifneqU1@individual.net... > > So I'm goofing around in the shop, and I have this set of P-3 Nathan > Airchimes from a diesel locomotive, just sitting on the shelf collecting > dust. I start looking at my Goldwing. Now, there was no beer involved, but > neverless, something weird happened. This thing is really fun. One of my > friends was riding by in the opposite direction yesterday and i gave him a > little toot. He said he damn near fell off of his bike laughing. > http://home.goldrush.com/obsoelyt/Horn1.jpg > http://home.goldrush.com/obsoelyt/Horn2.jpg > http://home.goldrush.com/obsoelyt/Horn3.jpg > http://home.goldrush.com/obsoelyt/Horn4.jpg > http://home.goldrush.com/obsoelyt/Horn5.jpg > > > > I haven't recorded them, but here is recording of another P-3 > > http://www.dieselairhorns.com/sounds/p3_SSW8065_OC.mp3 > > Here's some other uh, colorful deaf people. > > http://www.dieselairhorns.com/trucks.html > -- > Paul Calman, Hathaway Pines, California > > |
Re: OT, air horns
How are they powered ? I thought horns that big required onboard air or 24V
supply at least ? Dave Milne, Scotland '91 Grand Wagoneer, '99 TJ "Paul Calman" <spam@trap.com> wrote in message news:3bktoiF6ifneqU1@individual.net... > > So I'm goofing around in the shop, and I have this set of P-3 Nathan > Airchimes from a diesel locomotive, just sitting on the shelf collecting > dust. I start looking at my Goldwing. Now, there was no beer involved, but > neverless, something weird happened. This thing is really fun. One of my > friends was riding by in the opposite direction yesterday and i gave him a > little toot. He said he damn near fell off of his bike laughing. > http://home.goldrush.com/obsoelyt/Horn1.jpg > http://home.goldrush.com/obsoelyt/Horn2.jpg > http://home.goldrush.com/obsoelyt/Horn3.jpg > http://home.goldrush.com/obsoelyt/Horn4.jpg > http://home.goldrush.com/obsoelyt/Horn5.jpg > > > > I haven't recorded them, but here is recording of another P-3 > > http://www.dieselairhorns.com/sounds/p3_SSW8065_OC.mp3 > > Here's some other uh, colorful deaf people. > > http://www.dieselairhorns.com/trucks.html > -- > Paul Calman, Hathaway Pines, California > > |
Re: OT, air horns
..> How are they powered ? I thought horns that big required onboard air or
24V > supply at least ? I used an air compressor from an 81 Wing's suspension, 2 old propane torch tanks as air tanks, a solonoid valve, a 140 PSI shut-off for air bag suspension. I didn't lose any cargo capacity as it's all outside of the bags. I get about 5 seconds continuous blast (an eternity) or about 7 short hoots in succession, and then about 5 minutes for refill. I will be looking to scrounge a better compressor, but don't want to use all my charging capacity. I have an area above the center stand where i can install another small tank, but am looking for something to fill the shape. The system could all be removed in 20 minutes If i get tired of it (not likely) and when I install an 81 Wing's rear swing arm and final drive on this 76 Wing in a few weeks, I will be able to use the 81's air shock system without the usual welding of different lower ends to the shocks. This combo will give me a higher gear ratio for better mileage, and lengthen the wheelbase 2.5 inches. Tomorrow I am leaving on a ride for the weekend, so i will be able to compare my mileage with that of my trip 2 weeks ago and see what kind of change there is. I could follow aerodynamic practice and put a simple spike in front of each hooter to split the airflow, but the numbers will tell me if it's worth the effort. -- Paul Calman, Hathaway Pines, California |
Re: OT, air horns
..> How are they powered ? I thought horns that big required onboard air or
24V > supply at least ? I used an air compressor from an 81 Wing's suspension, 2 old propane torch tanks as air tanks, a solonoid valve, a 140 PSI shut-off for air bag suspension. I didn't lose any cargo capacity as it's all outside of the bags. I get about 5 seconds continuous blast (an eternity) or about 7 short hoots in succession, and then about 5 minutes for refill. I will be looking to scrounge a better compressor, but don't want to use all my charging capacity. I have an area above the center stand where i can install another small tank, but am looking for something to fill the shape. The system could all be removed in 20 minutes If i get tired of it (not likely) and when I install an 81 Wing's rear swing arm and final drive on this 76 Wing in a few weeks, I will be able to use the 81's air shock system without the usual welding of different lower ends to the shocks. This combo will give me a higher gear ratio for better mileage, and lengthen the wheelbase 2.5 inches. Tomorrow I am leaving on a ride for the weekend, so i will be able to compare my mileage with that of my trip 2 weeks ago and see what kind of change there is. I could follow aerodynamic practice and put a simple spike in front of each hooter to split the airflow, but the numbers will tell me if it's worth the effort. -- Paul Calman, Hathaway Pines, California |
Re: OT, air horns
..> How are they powered ? I thought horns that big required onboard air or
24V > supply at least ? I used an air compressor from an 81 Wing's suspension, 2 old propane torch tanks as air tanks, a solonoid valve, a 140 PSI shut-off for air bag suspension. I didn't lose any cargo capacity as it's all outside of the bags. I get about 5 seconds continuous blast (an eternity) or about 7 short hoots in succession, and then about 5 minutes for refill. I will be looking to scrounge a better compressor, but don't want to use all my charging capacity. I have an area above the center stand where i can install another small tank, but am looking for something to fill the shape. The system could all be removed in 20 minutes If i get tired of it (not likely) and when I install an 81 Wing's rear swing arm and final drive on this 76 Wing in a few weeks, I will be able to use the 81's air shock system without the usual welding of different lower ends to the shocks. This combo will give me a higher gear ratio for better mileage, and lengthen the wheelbase 2.5 inches. Tomorrow I am leaving on a ride for the weekend, so i will be able to compare my mileage with that of my trip 2 weeks ago and see what kind of change there is. I could follow aerodynamic practice and put a simple spike in front of each hooter to split the airflow, but the numbers will tell me if it's worth the effort. -- Paul Calman, Hathaway Pines, California |
Re: OT, air horns
..> How are they powered ? I thought horns that big required onboard air or
24V > supply at least ? I used an air compressor from an 81 Wing's suspension, 2 old propane torch tanks as air tanks, a solonoid valve, a 140 PSI shut-off for air bag suspension. I didn't lose any cargo capacity as it's all outside of the bags. I get about 5 seconds continuous blast (an eternity) or about 7 short hoots in succession, and then about 5 minutes for refill. I will be looking to scrounge a better compressor, but don't want to use all my charging capacity. I have an area above the center stand where i can install another small tank, but am looking for something to fill the shape. The system could all be removed in 20 minutes If i get tired of it (not likely) and when I install an 81 Wing's rear swing arm and final drive on this 76 Wing in a few weeks, I will be able to use the 81's air shock system without the usual welding of different lower ends to the shocks. This combo will give me a higher gear ratio for better mileage, and lengthen the wheelbase 2.5 inches. Tomorrow I am leaving on a ride for the weekend, so i will be able to compare my mileage with that of my trip 2 weeks ago and see what kind of change there is. I could follow aerodynamic practice and put a simple spike in front of each hooter to split the airflow, but the numbers will tell me if it's worth the effort. -- Paul Calman, Hathaway Pines, California |
Re: OT, air horns
And yet you insist no beer was involved.....???
That is totally wild, must have been good drugs instead.... ;-) Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Paul Calman wrote: > > .> How are they powered ? I thought horns that big required onboard air or > 24V > > supply at least ? > > I used an air compressor from an 81 Wing's suspension, 2 old propane torch > tanks as air tanks, a solonoid valve, a 140 PSI shut-off for air bag > suspension. I didn't lose any cargo capacity as it's all outside of the > bags. I get about 5 seconds continuous blast (an eternity) or about 7 short > hoots in succession, and then about 5 minutes for refill. I will be looking > to scrounge a better compressor, but don't want to use all my charging > capacity. I have an area above the center stand where i can install another > small tank, but am looking for something to fill the shape. > The system could all be removed in 20 minutes If i get tired of it (not > likely) and when I install an 81 Wing's rear swing arm and final drive on > this 76 Wing in a few weeks, I will be able to use the 81's air shock system > without the usual welding of different lower ends to the shocks. This combo > will give me a higher gear ratio for better mileage, and lengthen the > wheelbase 2.5 inches. > Tomorrow I am leaving on a ride for the weekend, so i will be able to > compare my mileage with that of my trip 2 weeks ago and see what kind of > change there is. I could follow aerodynamic practice and put a simple spike > in front of each hooter to split the airflow, but the numbers will tell me > if it's worth the effort. > > -- > Paul Calman, Hathaway Pines, California |
All times are GMT -4. The time now is 12:10 AM. |
© 2024 MH Sub I, LLC dba Internet Brands