opinions?
 

Yes, I know it's a small rig but I just don't weld that much (or have the space)
for a larger setup.

http://tinyurl.com/usgj

--
DougW

Re: opinions?
 

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.

http://7slotgrille.com/tech/welders/index.html


--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com

Re: opinions?
 

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.

http://7slotgrille.com/tech/welders/index.html


--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com

Re: opinions?
 

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.

http://7slotgrille.com/tech/welders/index.html


--
Nathan W. Collier
http://7SlotGrille.com
http://UtilityOffRoad.com

Re: opinions?
 

Doug, you can buy a small MIG welder for not much more than that. I'm close
to buying a welder and after talking with welding gurus I trust, I'm
limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
you posted the link to. :) (Dang, I tried to just send this to you
privately but you have your email address anti-spammed)

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.cox.net/jerrypb/

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.
>
> http://tinyurl.com/usgj
>
> --
> DougW
>
>

Re: opinions?
 

Doug, you can buy a small MIG welder for not much more than that. I'm close
to buying a welder and after talking with welding gurus I trust, I'm
limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
you posted the link to. :) (Dang, I tried to just send this to you
privately but you have your email address anti-spammed)

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.cox.net/jerrypb/

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.
>
> http://tinyurl.com/usgj
>
> --
> DougW
>
>

Re: opinions?
 

Doug, you can buy a small MIG welder for not much more than that. I'm close
to buying a welder and after talking with welding gurus I trust, I'm
limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
you posted the link to. :) (Dang, I tried to just send this to you
privately but you have your email address anti-spammed)

Jerry
--
Jerry Bransford
To email, remove 'me' from my email address
KC6TAY, PP-ASEL
See the Geezer Jeep at
http://members.cox.net/jerrypb/

"DougW" <post.replies@invalid.address> wrote in message
news:39Bsb.441$I85.317@okepread01...
> Yes, I know it's a small rig but I just don't weld that much (or have the
space)
> for a larger setup.
>
> http://tinyurl.com/usgj
>
> --
> DougW
>
>

Re: opinions?
 

Jerry Bransford did pass the time by typing:
> Doug, you can buy a small MIG welder for not much more than that. I'm close
> to buying a welder and after talking with welding gurus I trust, I'm
> limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
> you posted the link to. :) (Dang, I tried to just send this to you
> privately but you have your email address anti-spammed)

Yea.. sad side effect of the spammers out there. try douglas dot wilson
at cox dot net.

Two reasons I'm looking at that over a mig is that it is portable (doesn't need power)
and I can cut with it. For just welding I agree the mig would be best.


> "DougW" wrote ...
>> Yes, I know it's a small rig but I just don't weld that much (or have the
>> space) for a larger setup.
>>
>> http://tinyurl.com/usgj
>>
>> --
>> DougW

Re: opinions?
 

Jerry Bransford did pass the time by typing:
> Doug, you can buy a small MIG welder for not much more than that. I'm close
> to buying a welder and after talking with welding gurus I trust, I'm
> limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
> you posted the link to. :) (Dang, I tried to just send this to you
> privately but you have your email address anti-spammed)

Yea.. sad side effect of the spammers out there. try douglas dot wilson
at cox dot net.

Two reasons I'm looking at that over a mig is that it is portable (doesn't need power)
and I can cut with it. For just welding I agree the mig would be best.


> "DougW" wrote ...
>> Yes, I know it's a small rig but I just don't weld that much (or have the
>> space) for a larger setup.
>>
>> http://tinyurl.com/usgj
>>
>> --
>> DougW

Re: opinions?
 

Jerry Bransford did pass the time by typing:
> Doug, you can buy a small MIG welder for not much more than that. I'm close
> to buying a welder and after talking with welding gurus I trust, I'm
> limiting my choices to MIG. Plus it's easier to weld with MIG than that rig
> you posted the link to. :) (Dang, I tried to just send this to you
> privately but you have your email address anti-spammed)

Yea.. sad side effect of the spammers out there. try douglas dot wilson
at cox dot net.

Two reasons I'm looking at that over a mig is that it is portable (doesn't need power)
and I can cut with it. For just welding I agree the mig would be best.


> "DougW" wrote ...
>> Yes, I know it's a small rig but I just don't weld that much (or have the
>> space) for a larger setup.
>>
>> http://tinyurl.com/usgj
>>
>> --
>> DougW