Re: In need of manual transmission information: 2005 Rubicon
Go ahead and buy the allen wrench, like you see on the wall:
http://www.----------.com/oscilloscope.jpg Like you're going to check it on every oil change like a Real service station, right? God Bless America, Bill O|||||||O mailto:-------------------- campbell c freeman wrote: > > Thanks "c", > > The only problem i see with that is this is not a standard bolt. It is a > recessed threaded metric plug ~ 5/8" 'deep'...a hexagonal "hole" into which > the 1/2" drive socket tool you use has an extended hex shaft the size of the > plug. that tool fits into the plug and you either loosen or tighten the > plug. > > I hope i described that properly. I am not a mechanic. I am a drummer. > > ccf |
Re: In need of manual transmission information: 2005 Rubicon
Go ahead and buy the allen wrench, like you see on the wall:
http://www.----------.com/oscilloscope.jpg Like you're going to check it on every oil change like a Real service station, right? God Bless America, Bill O|||||||O mailto:-------------------- campbell c freeman wrote: > > Thanks "c", > > The only problem i see with that is this is not a standard bolt. It is a > recessed threaded metric plug ~ 5/8" 'deep'...a hexagonal "hole" into which > the 1/2" drive socket tool you use has an extended hex shaft the size of the > plug. that tool fits into the plug and you either loosen or tighten the > plug. > > I hope i described that properly. I am not a mechanic. I am a drummer. > > ccf |
Re: In need of manual transmission information: 2005 Rubicon
Go ahead and buy the allen wrench, like you see on the wall:
http://www.----------.com/oscilloscope.jpg Like you're going to check it on every oil change like a Real service station, right? God Bless America, Bill O|||||||O mailto:-------------------- campbell c freeman wrote: > > Thanks "c", > > The only problem i see with that is this is not a standard bolt. It is a > recessed threaded metric plug ~ 5/8" 'deep'...a hexagonal "hole" into which > the 1/2" drive socket tool you use has an extended hex shaft the size of the > plug. that tool fits into the plug and you either loosen or tighten the > plug. > > I hope i described that properly. I am not a mechanic. I am a drummer. > > ccf |
Re: In need of manual transmission information: 2005 Rubicon
Use a bolt of the correct size head & double nut the other end & turn with
a wrench |
Re: In need of manual transmission information: 2005 Rubicon
Use a bolt of the correct size head & double nut the other end & turn with
a wrench |
Re: In need of manual transmission information: 2005 Rubicon
Use a bolt of the correct size head & double nut the other end & turn with
a wrench |
Re: In need of manual transmission information: 2005 Rubicon
Use a bolt of the correct size head & double nut the other end & turn with
a wrench |
Re: In need of manual transmission information: 2005 Rubicon
FYI:
NSG-370 fill plug: 14 mm (caliper measured); drain plug: 17mm (fit with existing hex socket). campbell freeman "sqdancerLynn" <sqdancerlynn1@verizon.net> wrote in message news:b26dc28996c6323bafb3b8ace605210d@localhost.ta lkaboutautos.com... > Use a bolt of the correct size head & double nut the other end & turn with > a wrench > |
Re: In need of manual transmission information: 2005 Rubicon
FYI:
NSG-370 fill plug: 14 mm (caliper measured); drain plug: 17mm (fit with existing hex socket). campbell freeman "sqdancerLynn" <sqdancerlynn1@verizon.net> wrote in message news:b26dc28996c6323bafb3b8ace605210d@localhost.ta lkaboutautos.com... > Use a bolt of the correct size head & double nut the other end & turn with > a wrench > |
Re: In need of manual transmission information: 2005 Rubicon
FYI:
NSG-370 fill plug: 14 mm (caliper measured); drain plug: 17mm (fit with existing hex socket). campbell freeman "sqdancerLynn" <sqdancerlynn1@verizon.net> wrote in message news:b26dc28996c6323bafb3b8ace605210d@localhost.ta lkaboutautos.com... > Use a bolt of the correct size head & double nut the other end & turn with > a wrench > |
All times are GMT -4. The time now is 01:07 AM. |
© 2024 MH Sub I, LLC dba Internet Brands