|
Lube for dorr innards
The doors on my 92 XJ freeze up more than any other vehicle I've owned. I
guess I'll have to pull the inner panels and lubricate the latch and lock linkages when the weather warms up. What is the best lube for this job. I've got some T-9 around here somwhere. It's a liquid or spray water displacement marine product that turns waxxy as it dries. Would this work? |
Re: Lube for dorr innards
It will work for a while until the wax collects the dirt and jambs up the
pins in the cylinder WD40, cleans dry lubes and repels water. -- HarryS My 2¢ "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
It will work for a while until the wax collects the dirt and jambs up the
pins in the cylinder WD40, cleans dry lubes and repels water. -- HarryS My 2¢ "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
It will work for a while until the wax collects the dirt and jambs up the
pins in the cylinder WD40, cleans dry lubes and repels water. -- HarryS My 2¢ "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
On door mechanism linkage, I just use white lithium grease in a spray can.
Stephen R. Conrad wrote: > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. I've > got some T-9 around here somwhere. It's a liquid or spray water displacement > marine product that turns waxxy as it dries. Would this work? > > -- __________________________________________________ _________ tw 71 Bill Stroppe Baja Bronco 03 TJ Rubicon - Rubicon Express 4.5" 01 XJ Sport There is a very fine line between "hobby" and "mental illness." -- Dave Barry Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80-inch wheelbase, 1/4-ton capacity, and four-wheel drive used by the U.S. army in World War II. (Please remove the OBVIOUS to reply by email) __________________________________________________ _________ |
Re: Lube for dorr innards
On door mechanism linkage, I just use white lithium grease in a spray can.
Stephen R. Conrad wrote: > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. I've > got some T-9 around here somwhere. It's a liquid or spray water displacement > marine product that turns waxxy as it dries. Would this work? > > -- __________________________________________________ _________ tw 71 Bill Stroppe Baja Bronco 03 TJ Rubicon - Rubicon Express 4.5" 01 XJ Sport There is a very fine line between "hobby" and "mental illness." -- Dave Barry Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80-inch wheelbase, 1/4-ton capacity, and four-wheel drive used by the U.S. army in World War II. (Please remove the OBVIOUS to reply by email) __________________________________________________ _________ |
Re: Lube for dorr innards
On door mechanism linkage, I just use white lithium grease in a spray can.
Stephen R. Conrad wrote: > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. I've > got some T-9 around here somwhere. It's a liquid or spray water displacement > marine product that turns waxxy as it dries. Would this work? > > -- __________________________________________________ _________ tw 71 Bill Stroppe Baja Bronco 03 TJ Rubicon - Rubicon Express 4.5" 01 XJ Sport There is a very fine line between "hobby" and "mental illness." -- Dave Barry Pronunciation: 'jEp Function: noun Date: 1940 Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase') A small general-purpose motor vehicle with 80-inch wheelbase, 1/4-ton capacity, and four-wheel drive used by the U.S. army in World War II. (Please remove the OBVIOUS to reply by email) __________________________________________________ _________ |
Re: Lube for dorr innards
Thanks for the replies. I should have made it clear that this is a street
only vehicle. It is not garaged. It is not only the lock innards that need to be lubed but also apparently all the inner door handle linkages and pivot points. Is there something about the contstruction of this vehicle that makes it more prone to freeze ups? And I was also mistaken about the origin of the Boeshield T9 product. It was originally developed by Boeing as an aircraft lubricant. I have purchased it in marine stores, however. My concern about using WD40 is possible detrimental effects on plastic/rubber parts. "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
Thanks for the replies. I should have made it clear that this is a street
only vehicle. It is not garaged. It is not only the lock innards that need to be lubed but also apparently all the inner door handle linkages and pivot points. Is there something about the contstruction of this vehicle that makes it more prone to freeze ups? And I was also mistaken about the origin of the Boeshield T9 product. It was originally developed by Boeing as an aircraft lubricant. I have purchased it in marine stores, however. My concern about using WD40 is possible detrimental effects on plastic/rubber parts. "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
Thanks for the replies. I should have made it clear that this is a street
only vehicle. It is not garaged. It is not only the lock innards that need to be lubed but also apparently all the inner door handle linkages and pivot points. Is there something about the contstruction of this vehicle that makes it more prone to freeze ups? And I was also mistaken about the origin of the Boeshield T9 product. It was originally developed by Boeing as an aircraft lubricant. I have purchased it in marine stores, however. My concern about using WD40 is possible detrimental effects on plastic/rubber parts. "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message news:391dupF5r1phsU1@individual.net... > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > guess I'll have to pull the inner panels and lubricate the latch and lock > linkages when the weather warms up. What is the best lube for this job. > I've got some T-9 around here somwhere. It's a liquid or spray water > displacement marine product that turns waxxy as it dries. Would this work? > |
Re: Lube for dorr innards
I live in Canada....
The best is to clean all the linkages up with a solvent/cleaner/water displacer like WD40, then to use white lithium grease. It now comes in a spray so it can get into all the little parts. The best for the tumbler is bone dry and clean. I first use WD40 (a water displacement fluid used to dry things like locks and ignition wires and distributor cap innards) on the tumbler guts, then I use lock de-icer spray after the WD40 has dried up. The de-icer spray is an alcohol base that leaves the lock guts nice and dry and clean. I have seen folks use graphite in the lock, but it is very messy and still attracts dirt. Dry is best. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's "Stephen R. Conrad" wrote: > > Thanks for the replies. I should have made it clear that this is a street > only vehicle. It is not garaged. It is not only the lock innards that need > to be lubed but also apparently all the inner door handle linkages and pivot > points. Is there something about the contstruction of this vehicle that > makes it more prone to freeze ups? And I was also mistaken about the origin > of the Boeshield T9 product. It was originally developed by Boeing as an > aircraft lubricant. I have purchased it in marine stores, however. My > concern about using WD40 is possible detrimental effects on plastic/rubber > parts. > > "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message > news:391dupF5r1phsU1@individual.net... > > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > > guess I'll have to pull the inner panels and lubricate the latch and lock > > linkages when the weather warms up. What is the best lube for this job. > > I've got some T-9 around here somwhere. It's a liquid or spray water > > displacement marine product that turns waxxy as it dries. Would this work? > > |
Re: Lube for dorr innards
I live in Canada....
The best is to clean all the linkages up with a solvent/cleaner/water displacer like WD40, then to use white lithium grease. It now comes in a spray so it can get into all the little parts. The best for the tumbler is bone dry and clean. I first use WD40 (a water displacement fluid used to dry things like locks and ignition wires and distributor cap innards) on the tumbler guts, then I use lock de-icer spray after the WD40 has dried up. The de-icer spray is an alcohol base that leaves the lock guts nice and dry and clean. I have seen folks use graphite in the lock, but it is very messy and still attracts dirt. Dry is best. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's "Stephen R. Conrad" wrote: > > Thanks for the replies. I should have made it clear that this is a street > only vehicle. It is not garaged. It is not only the lock innards that need > to be lubed but also apparently all the inner door handle linkages and pivot > points. Is there something about the contstruction of this vehicle that > makes it more prone to freeze ups? And I was also mistaken about the origin > of the Boeshield T9 product. It was originally developed by Boeing as an > aircraft lubricant. I have purchased it in marine stores, however. My > concern about using WD40 is possible detrimental effects on plastic/rubber > parts. > > "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message > news:391dupF5r1phsU1@individual.net... > > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > > guess I'll have to pull the inner panels and lubricate the latch and lock > > linkages when the weather warms up. What is the best lube for this job. > > I've got some T-9 around here somwhere. It's a liquid or spray water > > displacement marine product that turns waxxy as it dries. Would this work? > > |
Re: Lube for dorr innards
I live in Canada....
The best is to clean all the linkages up with a solvent/cleaner/water displacer like WD40, then to use white lithium grease. It now comes in a spray so it can get into all the little parts. The best for the tumbler is bone dry and clean. I first use WD40 (a water displacement fluid used to dry things like locks and ignition wires and distributor cap innards) on the tumbler guts, then I use lock de-icer spray after the WD40 has dried up. The de-icer spray is an alcohol base that leaves the lock guts nice and dry and clean. I have seen folks use graphite in the lock, but it is very messy and still attracts dirt. Dry is best. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's "Stephen R. Conrad" wrote: > > Thanks for the replies. I should have made it clear that this is a street > only vehicle. It is not garaged. It is not only the lock innards that need > to be lubed but also apparently all the inner door handle linkages and pivot > points. Is there something about the contstruction of this vehicle that > makes it more prone to freeze ups? And I was also mistaken about the origin > of the Boeshield T9 product. It was originally developed by Boeing as an > aircraft lubricant. I have purchased it in marine stores, however. My > concern about using WD40 is possible detrimental effects on plastic/rubber > parts. > > "Stephen R. Conrad" <sconradpt@yahoo.com> wrote in message > news:391dupF5r1phsU1@individual.net... > > The doors on my 92 XJ freeze up more than any other vehicle I've owned. I > > guess I'll have to pull the inner panels and lubricate the latch and lock > > linkages when the weather warms up. What is the best lube for this job. > > I've got some T-9 around here somwhere. It's a liquid or spray water > > displacement marine product that turns waxxy as it dries. Would this work? > > |
| All times are GMT -4. The time now is 03:41 PM. |
© 2024 MH Sub I, LLC dba Internet Brands