Looking For a Tool
 

Here is a site that has over 12,000 tools and supplies.
http://jcsonlinetoolshed.com/index.php

Re: Looking For a Tool
 

Your commercial spam is not wanted in this newsgroup. This group does
have a Charter specifically forbidding commercial advertisers.

The Charter is located here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Curtis wrote:
<spam snipped>

Re: Looking For a Tool
 

Your commercial spam is not wanted in this newsgroup. This group does
have a Charter specifically forbidding commercial advertisers.

The Charter is located here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Curtis wrote:
<spam snipped>

Re: Looking For a Tool
 

Your commercial spam is not wanted in this newsgroup. This group does
have a Charter specifically forbidding commercial advertisers.

The Charter is located here:

ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Curtis wrote:
<spam snipped>

Re: Looking For a Tool
 

He apologized off line, Thanks Curtis!

Mike

Mike Romain wrote:
>
> Your commercial spam is not wanted in this newsgroup. This group does
> have a Charter specifically forbidding commercial advertisers.
>
> The Charter is located here:
>
> ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Curtis wrote:
> <spam snipped>

Re: Looking For a Tool
 

He apologized off line, Thanks Curtis!

Mike

Mike Romain wrote:
>
> Your commercial spam is not wanted in this newsgroup. This group does
> have a Charter specifically forbidding commercial advertisers.
>
> The Charter is located here:
>
> ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Curtis wrote:
> <spam snipped>

Re: Looking For a Tool
 

He apologized off line, Thanks Curtis!

Mike

Mike Romain wrote:
>
> Your commercial spam is not wanted in this newsgroup. This group does
> have a Charter specifically forbidding commercial advertisers.
>
> The Charter is located here:
>
> ftp://ftp.uu.net/usenet/news.announc...rs.jeep+willys
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Curtis wrote:
> <spam snipped>

Re: Looking For a Tool
 

12000 tools, and not a single left-handed monkey wrench.


"Curtis" <macdaddy14@frontiernet.net> wrote in message
news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> Here is a site that has over 12,000 tools and supplies.
> http://www.amishrakefight.org/gfy

Re: Looking For a Tool
 

12000 tools, and not a single left-handed monkey wrench.


"Curtis" <macdaddy14@frontiernet.net> wrote in message
news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> Here is a site that has over 12,000 tools and supplies.
> http://www.amishrakefight.org/gfy

Re: Looking For a Tool
 

12000 tools, and not a single left-handed monkey wrench.


"Curtis" <macdaddy14@frontiernet.net> wrote in message
news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> Here is a site that has over 12,000 tools and supplies.
> http://www.amishrakefight.org/gfy

Re: Looking For a Tool
 

they do sell metric cresent wrenches!!



"Steve Foley" <steve.foley@DELETEatt.net> wrote in message
news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
> 12000 tools, and not a single left-handed monkey wrench.
>
>
> "Curtis" <macdaddy14@frontiernet.net> wrote in message
> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> > Here is a site that has over 12,000 tools and supplies.
> > http://www.amishrakefight.org/gfy
>
>

Re: Looking For a Tool
 

they do sell metric cresent wrenches!!



"Steve Foley" <steve.foley@DELETEatt.net> wrote in message
news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
> 12000 tools, and not a single left-handed monkey wrench.
>
>
> "Curtis" <macdaddy14@frontiernet.net> wrote in message
> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> > Here is a site that has over 12,000 tools and supplies.
> > http://www.amishrakefight.org/gfy
>
>

Re: Looking For a Tool
 

they do sell metric cresent wrenches!!



"Steve Foley" <steve.foley@DELETEatt.net> wrote in message
news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
> 12000 tools, and not a single left-handed monkey wrench.
>
>
> "Curtis" <macdaddy14@frontiernet.net> wrote in message
> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
> > Here is a site that has over 12,000 tools and supplies.
> > http://www.amishrakefight.org/gfy
>
>

Re: Looking For a Tool
 

Yep, bet on have one look on the handle 200 or 400 mm.
HarryS

"IsellJeeps" <123@abc.net> wrote in message
news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
> they do sell metric cresent wrenches!!
>
>
>
> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>> 12000 tools, and not a single left-handed monkey wrench.
>>
>>
>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>> > Here is a site that has over 12,000 tools and supplies.
>> > http://www.amishrakefight.org/gfy
>>
>>
>
>

Re: Looking For a Tool
 

Yep, bet on have one look on the handle 200 or 400 mm.
HarryS

"IsellJeeps" <123@abc.net> wrote in message
news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
> they do sell metric cresent wrenches!!
>
>
>
> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>> 12000 tools, and not a single left-handed monkey wrench.
>>
>>
>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>> > Here is a site that has over 12,000 tools and supplies.
>> > http://www.amishrakefight.org/gfy
>>
>>
>
>

Re: Looking For a Tool
 

Yep, bet on have one look on the handle 200 or 400 mm.
HarryS

"IsellJeeps" <123@abc.net> wrote in message
news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
> they do sell metric cresent wrenches!!
>
>
>
> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>> 12000 tools, and not a single left-handed monkey wrench.
>>
>>
>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>> > Here is a site that has over 12,000 tools and supplies.
>> > http://www.amishrakefight.org/gfy
>>
>>
>
>

Re: Looking For a Tool
 

On Tue, 19 Oct 2004 20:56:06 GMT, "Steve Foley"
<steve.foley@DELETEatt.net> wrote:

>12000 tools, and not a single left-handed monkey wrench.

My left-handed monkey had his own tools.

Re: Looking For a Tool
 

On Tue, 19 Oct 2004 20:56:06 GMT, "Steve Foley"
<steve.foley@DELETEatt.net> wrote:

>12000 tools, and not a single left-handed monkey wrench.

My left-handed monkey had his own tools.

Re: Looking For a Tool
 

On Tue, 19 Oct 2004 20:56:06 GMT, "Steve Foley"
<steve.foley@DELETEatt.net> wrote:

>12000 tools, and not a single left-handed monkey wrench.

My left-handed monkey had his own tools.

Re: Looking For a Tool
 

041019 1816 - HarryS posted:

> Yep, bet on have one look on the handle 200 or 400 mm.
> HarryS
>
> "IsellJeeps" <123@abc.net> wrote in message
> news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
>> they do sell metric cresent wrenches!!
>>
>>
>>
>> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
>> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>>> 12000 tools, and not a single left-handed monkey wrench.
>>>
>>>
>>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>>>> Here is a site that has over 12,000 tools and supplies.
>>>> http://www.amishrakefight.org/gfy
>>>

I didn't see a solar powered flashlight in their catalog either...

Re: Looking For a Tool
 

041019 1816 - HarryS posted:

> Yep, bet on have one look on the handle 200 or 400 mm.
> HarryS
>
> "IsellJeeps" <123@abc.net> wrote in message
> news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
>> they do sell metric cresent wrenches!!
>>
>>
>>
>> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
>> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>>> 12000 tools, and not a single left-handed monkey wrench.
>>>
>>>
>>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>>>> Here is a site that has over 12,000 tools and supplies.
>>>> http://www.amishrakefight.org/gfy
>>>

I didn't see a solar powered flashlight in their catalog either...

Re: Looking For a Tool
 

041019 1816 - HarryS posted:

> Yep, bet on have one look on the handle 200 or 400 mm.
> HarryS
>
> "IsellJeeps" <123@abc.net> wrote in message
> news:wCfdd.7604$Al3.2478@newssvr30.news.prodigy.co m...
>> they do sell metric cresent wrenches!!
>>
>>
>>
>> "Steve Foley" <steve.foley@DELETEatt.net> wrote in message
>> news:Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net...
>>> 12000 tools, and not a single left-handed monkey wrench.
>>>
>>>
>>> "Curtis" <macdaddy14@frontiernet.net> wrote in message
>>> news:3ffb662f.0410191145.2b19dbd0@posting.google.c om...
>>>> Here is a site that has over 12,000 tools and supplies.
>>>> http://www.amishrakefight.org/gfy
>>>

I didn't see a solar powered flashlight in their catalog either...

Re: Looking For a Tool
 

I was going to post something smart-assed, but it appears they have
legit brand names...might be ok. Are their prices competitive, yet
allowing them enough profit to give reasonable service?


Just in the interest of fairness, some others:

http://www.snap-on.com

http://www.stahlwille.com

http://www.mactools.com

http://www.matcotools.com

http://www.johnstonesupply.com

(I would have posted a link for Cornwall, but if they're still in
business they have hidden themselves pretty well.)

Re: Looking For a Tool
 

I was going to post something smart-assed, but it appears they have
legit brand names...might be ok. Are their prices competitive, yet
allowing them enough profit to give reasonable service?


Just in the interest of fairness, some others:

http://www.snap-on.com

http://www.stahlwille.com

http://www.mactools.com

http://www.matcotools.com

http://www.johnstonesupply.com

(I would have posted a link for Cornwall, but if they're still in
business they have hidden themselves pretty well.)

Re: Looking For a Tool
 

I was going to post something smart-assed, but it appears they have
legit brand names...might be ok. Are their prices competitive, yet
allowing them enough profit to give reasonable service?


Just in the interest of fairness, some others:

http://www.snap-on.com

http://www.stahlwille.com

http://www.mactools.com

http://www.matcotools.com

http://www.johnstonesupply.com

(I would have posted a link for Cornwall, but if they're still in
business they have hidden themselves pretty well.)

Re: Looking For a Tool
 

What is is with some of you assholes?

Ted if you do not like this Jeep newsgroup with it's Charter then you
are more than welcome to go somewhere else.

There are lots of places you can post your bull ---- without offending a
whole group of people.

There is a reason this group has a Charter forbidding commercial sales.
Feel free to go find some other group with no charter so you can do as
you please without complaints.

Complaints can be forwarded to:
groups-abuse@google.com
abuse@hotmail.com

Be sure to include the full header

Mike
-----------------------------------------
Path:

news20.bellglobal.com!nf1.bellglobal.com!nf3.bellg lobal.com!wns14feed!worldnet.att.net!199.218.7.141 !news.glorb.com!postnews1.google.com!not-for-mail
From:
larboard34@hotmail.com (Ted Azito)
Newsgroups:
rec.autos.makers.chrysler,
rec.autos.makers.honda, rec.autos.makers.jeep+willys,
rec.autos.makers.saturn
Subject:
Re: Looking For a Tool
Date:
23 Oct 2004 17:02:36 -0700
Organization:
http://groups.google.com
Lines:
19
Message-ID:

<b53da461.0410231602.fe68477@posting.google.com>
References:

<3ffb662f.0410191145.2b19dbd0@posting.google.com >
<Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net>

<wCfdd.7604$Al3.2478@newssvr30.news.prodigy.com>
<iOGdnXRNA8HRD-jcRVn-3w@comcast.com>
<BD9C9C9E.2726%elindago@earthlink.net>
NNTP-Posting-Host:
63.164.145.198
Content-Type:
text/plain; charset=ISO-8859-1
Content-Transfer-Encoding:
8bit
X-Trace:
posting.google.com 1098576156 27706
127.0.0.1 (24 Oct 2004 00:02:36 GMT)
X-Complaints-To:
groups-abuse@google.com
NNTP-Posting-Date:
Sun, 24 Oct 2004 00:02:36 +0000 (UTC)
Xref:
nf1.bellglobal.com
rec.autos.makers.chrysler:268248 rec.autos.makers.honda:449381
rec.autos.makers.jeep+willys:568207
rec.autos.makers.saturn:161855

Ted Azito wrote:
>
> I was going to post something smart-assed,

<Snip advertising and cross posts>

Re: Looking For a Tool
 

What is is with some of you assholes?

Ted if you do not like this Jeep newsgroup with it's Charter then you
are more than welcome to go somewhere else.

There are lots of places you can post your bull ---- without offending a
whole group of people.

There is a reason this group has a Charter forbidding commercial sales.
Feel free to go find some other group with no charter so you can do as
you please without complaints.

Complaints can be forwarded to:
groups-abuse@google.com
abuse@hotmail.com

Be sure to include the full header

Mike
-----------------------------------------
Path:

news20.bellglobal.com!nf1.bellglobal.com!nf3.bellg lobal.com!wns14feed!worldnet.att.net!199.218.7.141 !news.glorb.com!postnews1.google.com!not-for-mail
From:
larboard34@hotmail.com (Ted Azito)
Newsgroups:
rec.autos.makers.chrysler,
rec.autos.makers.honda, rec.autos.makers.jeep+willys,
rec.autos.makers.saturn
Subject:
Re: Looking For a Tool
Date:
23 Oct 2004 17:02:36 -0700
Organization:
http://groups.google.com
Lines:
19
Message-ID:

<b53da461.0410231602.fe68477@posting.google.com>
References:

<3ffb662f.0410191145.2b19dbd0@posting.google.com >
<Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net>

<wCfdd.7604$Al3.2478@newssvr30.news.prodigy.com>
<iOGdnXRNA8HRD-jcRVn-3w@comcast.com>
<BD9C9C9E.2726%elindago@earthlink.net>
NNTP-Posting-Host:
63.164.145.198
Content-Type:
text/plain; charset=ISO-8859-1
Content-Transfer-Encoding:
8bit
X-Trace:
posting.google.com 1098576156 27706
127.0.0.1 (24 Oct 2004 00:02:36 GMT)
X-Complaints-To:
groups-abuse@google.com
NNTP-Posting-Date:
Sun, 24 Oct 2004 00:02:36 +0000 (UTC)
Xref:
nf1.bellglobal.com
rec.autos.makers.chrysler:268248 rec.autos.makers.honda:449381
rec.autos.makers.jeep+willys:568207
rec.autos.makers.saturn:161855

Ted Azito wrote:
>
> I was going to post something smart-assed,

<Snip advertising and cross posts>

Re: Looking For a Tool
 

What is is with some of you assholes?

Ted if you do not like this Jeep newsgroup with it's Charter then you
are more than welcome to go somewhere else.

There are lots of places you can post your bull ---- without offending a
whole group of people.

There is a reason this group has a Charter forbidding commercial sales.
Feel free to go find some other group with no charter so you can do as
you please without complaints.

Complaints can be forwarded to:
groups-abuse@google.com
abuse@hotmail.com

Be sure to include the full header

Mike
-----------------------------------------
Path:

news20.bellglobal.com!nf1.bellglobal.com!nf3.bellg lobal.com!wns14feed!worldnet.att.net!199.218.7.141 !news.glorb.com!postnews1.google.com!not-for-mail
From:
larboard34@hotmail.com (Ted Azito)
Newsgroups:
rec.autos.makers.chrysler,
rec.autos.makers.honda, rec.autos.makers.jeep+willys,
rec.autos.makers.saturn
Subject:
Re: Looking For a Tool
Date:
23 Oct 2004 17:02:36 -0700
Organization:
http://groups.google.com
Lines:
19
Message-ID:

<b53da461.0410231602.fe68477@posting.google.com>
References:

<3ffb662f.0410191145.2b19dbd0@posting.google.com >
<Gbfdd.12448$OD2.11543@bgtnsc05-news.ops.worldnet.att.net>

<wCfdd.7604$Al3.2478@newssvr30.news.prodigy.com>
<iOGdnXRNA8HRD-jcRVn-3w@comcast.com>
<BD9C9C9E.2726%elindago@earthlink.net>
NNTP-Posting-Host:
63.164.145.198
Content-Type:
text/plain; charset=ISO-8859-1
Content-Transfer-Encoding:
8bit
X-Trace:
posting.google.com 1098576156 27706
127.0.0.1 (24 Oct 2004 00:02:36 GMT)
X-Complaints-To:
groups-abuse@google.com
NNTP-Posting-Date:
Sun, 24 Oct 2004 00:02:36 +0000 (UTC)
Xref:
nf1.bellglobal.com
rec.autos.makers.chrysler:268248 rec.autos.makers.honda:449381
rec.autos.makers.jeep+willys:568207
rec.autos.makers.saturn:161855

Ted Azito wrote:
>
> I was going to post something smart-assed,

<Snip advertising and cross posts>

Re: Looking For a Tool
 

This was a mistake, not because your amateur netcopping intimidates me
in the least, but because it was supposed to go to _another_ newsgroup
with a _different_ response to the (same) original post, specifically
r.a.m.chrysler, which had a very different response than this one. I
may have made a mistake....in fact it appears I did...but YOU _were_ a
mistake. No question.

Re: Looking For a Tool
 

This was a mistake, not because your amateur netcopping intimidates me
in the least, but because it was supposed to go to _another_ newsgroup
with a _different_ response to the (same) original post, specifically
r.a.m.chrysler, which had a very different response than this one. I
may have made a mistake....in fact it appears I did...but YOU _were_ a
mistake. No question.

Re: Looking For a Tool
 

This was a mistake, not because your amateur netcopping intimidates me
in the least, but because it was supposed to go to _another_ newsgroup
with a _different_ response to the (same) original post, specifically
r.a.m.chrysler, which had a very different response than this one. I
may have made a mistake....in fact it appears I did...but YOU _were_ a
mistake. No question.

Re: Looking For a Tool
 

Ted Azito proclaimed:

> This was a mistake, not because your amateur netcopping intimidates me
> in the least, but because it was supposed to go to _another_ newsgroup
> with a _different_ response to the (same) original post, specifically
> r.a.m.chrysler, which had a very different response than this one. I
> may have made a mistake....in fact it appears I did...but YOU _were_ a
> mistake. No question.

Y'all be extra careful the door doesn't hit you in the *ss on your
way out, hear?

Re: Looking For a Tool
 

Ted Azito proclaimed:

> This was a mistake, not because your amateur netcopping intimidates me
> in the least, but because it was supposed to go to _another_ newsgroup
> with a _different_ response to the (same) original post, specifically
> r.a.m.chrysler, which had a very different response than this one. I
> may have made a mistake....in fact it appears I did...but YOU _were_ a
> mistake. No question.

Y'all be extra careful the door doesn't hit you in the *ss on your
way out, hear?

Re: Looking For a Tool
 

Ted Azito proclaimed:

> This was a mistake, not because your amateur netcopping intimidates me
> in the least, but because it was supposed to go to _another_ newsgroup
> with a _different_ response to the (same) original post, specifically
> r.a.m.chrysler, which had a very different response than this one. I
> may have made a mistake....in fact it appears I did...but YOU _were_ a
> mistake. No question.

Y'all be extra careful the door doesn't hit you in the *ss on your
way out, hear?