Looking for a fuse block 92 YJ 4.0L
I just can't find the right place to look. My fuse block's terminals
(spring clips that hold the blades of the fuse) are loosening and in one case, breaking. One fuse just falls out when I go over a bump. Where should I look for a fuse block? Thanks! |
Re: Looking for a fuse block 92 YJ 4.0L
<davehansen22@gmail.com> wrote in message
news:1177034554.997158.254490@b75g2000hsg.googlegr oups.com... > I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > Dealer, junkyard. Can you jam something in there to keep the fuse from falling out? Earle |
Re: Looking for a fuse block 92 YJ 4.0L
<davehansen22@gmail.com> wrote in message
news:1177034554.997158.254490@b75g2000hsg.googlegr oups.com... > I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > Dealer, junkyard. Can you jam something in there to keep the fuse from falling out? Earle |
Re: Looking for a fuse block 92 YJ 4.0L
<davehansen22@gmail.com> wrote in message
news:1177034554.997158.254490@b75g2000hsg.googlegr oups.com... > I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > Dealer, junkyard. Can you jam something in there to keep the fuse from falling out? Earle |
Re: Looking for a fuse block 92 YJ 4.0L
<davehansen22@gmail.com> wrote in message
news:1177034554.997158.254490@b75g2000hsg.googlegr oups.com... > I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > Dealer, junkyard. Can you jam something in there to keep the fuse from falling out? Earle |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 19, 9:02 pm, davehanse...@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! You might find something on Ebay too. |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 19, 9:02 pm, davehanse...@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! You might find something on Ebay too. |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 19, 9:02 pm, davehanse...@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! You might find something on Ebay too. |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 19, 9:02 pm, davehanse...@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! You might find something on Ebay too. |
Re: Looking for a fuse block 92 YJ 4.0L
davehansen22@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > A full sized GM van or GM car would have almost the identical panel or one that could be wired in I think if it is the one up under the dash by the e-brake. It matches the 86 CJ one close anyway. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Looking for a fuse block 92 YJ 4.0L
davehansen22@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > A full sized GM van or GM car would have almost the identical panel or one that could be wired in I think if it is the one up under the dash by the e-brake. It matches the 86 CJ one close anyway. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Looking for a fuse block 92 YJ 4.0L
davehansen22@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > A full sized GM van or GM car would have almost the identical panel or one that could be wired in I think if it is the one up under the dash by the e-brake. It matches the 86 CJ one close anyway. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Looking for a fuse block 92 YJ 4.0L
davehansen22@gmail.com wrote:
> I just can't find the right place to look. My fuse block's terminals > (spring clips that hold the blades of the fuse) are loosening and in > one case, breaking. One fuse just falls out when I go over a bump. > > Where should I look for a fuse block? > > Thanks! > A full sized GM van or GM car would have almost the identical panel or one that could be wired in I think if it is the one up under the dash by the e-brake. It matches the 86 CJ one close anyway. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote:
> davehanse...@gmail.com wrote: > > I just can't find the right place to look. My fuse block's terminals > > (spring clips that hold the blades of the fuse) are loosening and in > > one case, breaking. One fuse just falls out when I go over a bump. > > > Where should I look for a fuse block? > > > Thanks! > > A full sized GM van or GM car would have almost the identical panel or > one that could be wired in I think if it is the one up under the dash by > the e-brake. It matches the 86 CJ one close anyway. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) Funny, I ordered one from the dealer, pre-paid, and waited because it was backordered. Two months went by and then I called to find out. Between ordering it and checking two months later, it was dropped and no longer available. I called a few junk yards but was told that electrical parts were hard to come by because they get snapped up so quickly. I'll keep looking though. I was hoping someone knew of a source for electrical parts like this. Thanks |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote:
> davehanse...@gmail.com wrote: > > I just can't find the right place to look. My fuse block's terminals > > (spring clips that hold the blades of the fuse) are loosening and in > > one case, breaking. One fuse just falls out when I go over a bump. > > > Where should I look for a fuse block? > > > Thanks! > > A full sized GM van or GM car would have almost the identical panel or > one that could be wired in I think if it is the one up under the dash by > the e-brake. It matches the 86 CJ one close anyway. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) Funny, I ordered one from the dealer, pre-paid, and waited because it was backordered. Two months went by and then I called to find out. Between ordering it and checking two months later, it was dropped and no longer available. I called a few junk yards but was told that electrical parts were hard to come by because they get snapped up so quickly. I'll keep looking though. I was hoping someone knew of a source for electrical parts like this. Thanks |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote:
> davehanse...@gmail.com wrote: > > I just can't find the right place to look. My fuse block's terminals > > (spring clips that hold the blades of the fuse) are loosening and in > > one case, breaking. One fuse just falls out when I go over a bump. > > > Where should I look for a fuse block? > > > Thanks! > > A full sized GM van or GM car would have almost the identical panel or > one that could be wired in I think if it is the one up under the dash by > the e-brake. It matches the 86 CJ one close anyway. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) Funny, I ordered one from the dealer, pre-paid, and waited because it was backordered. Two months went by and then I called to find out. Between ordering it and checking two months later, it was dropped and no longer available. I called a few junk yards but was told that electrical parts were hard to come by because they get snapped up so quickly. I'll keep looking though. I was hoping someone knew of a source for electrical parts like this. Thanks |
Re: Looking for a fuse block 92 YJ 4.0L
On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote:
> davehanse...@gmail.com wrote: > > I just can't find the right place to look. My fuse block's terminals > > (spring clips that hold the blades of the fuse) are loosening and in > > one case, breaking. One fuse just falls out when I go over a bump. > > > Where should I look for a fuse block? > > > Thanks! > > A full sized GM van or GM car would have almost the identical panel or > one that could be wired in I think if it is the one up under the dash by > the e-brake. It matches the 86 CJ one close anyway. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > Canadian Off Road Trips Photos: Non members can still view! > Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 > (More Off Road album links at bottom of the view page) Funny, I ordered one from the dealer, pre-paid, and waited because it was backordered. Two months went by and then I called to find out. Between ordering it and checking two months later, it was dropped and no longer available. I called a few junk yards but was told that electrical parts were hard to come by because they get snapped up so quickly. I'll keep looking though. I was hoping someone knew of a source for electrical parts like this. Thanks |
Re: Looking for a fuse block 92 YJ 4.0L
Dave Hansen wrote:
> On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote: >> davehanse...@gmail.com wrote: >>> I just can't find the right place to look. My fuse block's terminals >>> (spring clips that hold the blades of the fuse) are loosening and in >>> one case, breaking. One fuse just falls out when I go over a bump. >>> Where should I look for a fuse block? >>> Thanks! >> A full sized GM van or GM car would have almost the identical panel or >> one that could be wired in I think if it is the one up under the dash by >> the e-brake. It matches the 86 CJ one close anyway. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 >> (More Off Road album links at bottom of the view page) > > > Funny, I ordered one from the dealer, pre-paid, and waited because it > was backordered. Two months went by and then I called to find out. > Between ordering it and checking two months later, it was dropped and > no longer available. > > I called a few junk yards but was told that electrical parts were hard > to come by because they get snapped up so quickly. > I'll keep looking though. I was hoping someone knew of a source for > electrical parts like this. > Thanks > I wish I had a YJ here to compare it with, then I could say for sure because I have a GM one in the garage. A friend traded be a complete harness for a full sized GM van for some work on his van and I used it to replace all the rotted harness plugs and sockets when I rebuilt my CJ7. The all are the same. The full sized GM vans are common in the wreckers. If the case comes apart in the same harness modules, the 'fuse' part of the box would swap over easy. I am thinking on inviting a friend with a YJ over on the weekend for a BBQ, if it happens I will look. What about companies like 'painless wiring' to name only one I can think of at this moment? There are a couple out there that make replacement harnesses, I would think they might sell just the fuse box. Mike |
Re: Looking for a fuse block 92 YJ 4.0L
Dave Hansen wrote:
> On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote: >> davehanse...@gmail.com wrote: >>> I just can't find the right place to look. My fuse block's terminals >>> (spring clips that hold the blades of the fuse) are loosening and in >>> one case, breaking. One fuse just falls out when I go over a bump. >>> Where should I look for a fuse block? >>> Thanks! >> A full sized GM van or GM car would have almost the identical panel or >> one that could be wired in I think if it is the one up under the dash by >> the e-brake. It matches the 86 CJ one close anyway. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 >> (More Off Road album links at bottom of the view page) > > > Funny, I ordered one from the dealer, pre-paid, and waited because it > was backordered. Two months went by and then I called to find out. > Between ordering it and checking two months later, it was dropped and > no longer available. > > I called a few junk yards but was told that electrical parts were hard > to come by because they get snapped up so quickly. > I'll keep looking though. I was hoping someone knew of a source for > electrical parts like this. > Thanks > I wish I had a YJ here to compare it with, then I could say for sure because I have a GM one in the garage. A friend traded be a complete harness for a full sized GM van for some work on his van and I used it to replace all the rotted harness plugs and sockets when I rebuilt my CJ7. The all are the same. The full sized GM vans are common in the wreckers. If the case comes apart in the same harness modules, the 'fuse' part of the box would swap over easy. I am thinking on inviting a friend with a YJ over on the weekend for a BBQ, if it happens I will look. What about companies like 'painless wiring' to name only one I can think of at this moment? There are a couple out there that make replacement harnesses, I would think they might sell just the fuse box. Mike |
Re: Looking for a fuse block 92 YJ 4.0L
Dave Hansen wrote:
> On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote: >> davehanse...@gmail.com wrote: >>> I just can't find the right place to look. My fuse block's terminals >>> (spring clips that hold the blades of the fuse) are loosening and in >>> one case, breaking. One fuse just falls out when I go over a bump. >>> Where should I look for a fuse block? >>> Thanks! >> A full sized GM van or GM car would have almost the identical panel or >> one that could be wired in I think if it is the one up under the dash by >> the e-brake. It matches the 86 CJ one close anyway. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 >> (More Off Road album links at bottom of the view page) > > > Funny, I ordered one from the dealer, pre-paid, and waited because it > was backordered. Two months went by and then I called to find out. > Between ordering it and checking two months later, it was dropped and > no longer available. > > I called a few junk yards but was told that electrical parts were hard > to come by because they get snapped up so quickly. > I'll keep looking though. I was hoping someone knew of a source for > electrical parts like this. > Thanks > I wish I had a YJ here to compare it with, then I could say for sure because I have a GM one in the garage. A friend traded be a complete harness for a full sized GM van for some work on his van and I used it to replace all the rotted harness plugs and sockets when I rebuilt my CJ7. The all are the same. The full sized GM vans are common in the wreckers. If the case comes apart in the same harness modules, the 'fuse' part of the box would swap over easy. I am thinking on inviting a friend with a YJ over on the weekend for a BBQ, if it happens I will look. What about companies like 'painless wiring' to name only one I can think of at this moment? There are a couple out there that make replacement harnesses, I would think they might sell just the fuse box. Mike |
Re: Looking for a fuse block 92 YJ 4.0L
Dave Hansen wrote:
> On Apr 20, 6:42 am, Mike Romain <roma...@sympatico.ca> wrote: >> davehanse...@gmail.com wrote: >>> I just can't find the right place to look. My fuse block's terminals >>> (spring clips that hold the blades of the fuse) are loosening and in >>> one case, breaking. One fuse just falls out when I go over a bump. >>> Where should I look for a fuse block? >>> Thanks! >> A full sized GM van or GM car would have almost the identical panel or >> one that could be wired in I think if it is the one up under the dash by >> the e-brake. It matches the 86 CJ one close anyway. >> >> Mike >> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >> 88 Cherokee 235 BFG AT's >> Canadian Off Road Trips Photos: Non members can still view! >> Jan/06http://www.imagestation.com/album/pictures.html?id=2115147590 >> (More Off Road album links at bottom of the view page) > > > Funny, I ordered one from the dealer, pre-paid, and waited because it > was backordered. Two months went by and then I called to find out. > Between ordering it and checking two months later, it was dropped and > no longer available. > > I called a few junk yards but was told that electrical parts were hard > to come by because they get snapped up so quickly. > I'll keep looking though. I was hoping someone knew of a source for > electrical parts like this. > Thanks > I wish I had a YJ here to compare it with, then I could say for sure because I have a GM one in the garage. A friend traded be a complete harness for a full sized GM van for some work on his van and I used it to replace all the rotted harness plugs and sockets when I rebuilt my CJ7. The all are the same. The full sized GM vans are common in the wreckers. If the case comes apart in the same harness modules, the 'fuse' part of the box would swap over easy. I am thinking on inviting a friend with a YJ over on the weekend for a BBQ, if it happens I will look. What about companies like 'painless wiring' to name only one I can think of at this moment? There are a couple out there that make replacement harnesses, I would think they might sell just the fuse box. Mike |
Re: Looking for a fuse block 92 YJ 4.0L
On 19 Apr 2007 19:02:35 -0700, davehansen22@gmail.com wrote:
>I just can't find the right place to look. My fuse block's terminals >(spring clips that hold the blades of the fuse) are loosening and in >one case, breaking. One fuse just falls out when I go over a bump. > >Where should I look for a fuse block? > >Thanks! Get one from a junkyard. You can take the terminals out to replace your bad ones. |
Re: Looking for a fuse block 92 YJ 4.0L
On 19 Apr 2007 19:02:35 -0700, davehansen22@gmail.com wrote:
>I just can't find the right place to look. My fuse block's terminals >(spring clips that hold the blades of the fuse) are loosening and in >one case, breaking. One fuse just falls out when I go over a bump. > >Where should I look for a fuse block? > >Thanks! Get one from a junkyard. You can take the terminals out to replace your bad ones. |
Re: Looking for a fuse block 92 YJ 4.0L
On 19 Apr 2007 19:02:35 -0700, davehansen22@gmail.com wrote:
>I just can't find the right place to look. My fuse block's terminals >(spring clips that hold the blades of the fuse) are loosening and in >one case, breaking. One fuse just falls out when I go over a bump. > >Where should I look for a fuse block? > >Thanks! Get one from a junkyard. You can take the terminals out to replace your bad ones. |
Re: Looking for a fuse block 92 YJ 4.0L
On 19 Apr 2007 19:02:35 -0700, davehansen22@gmail.com wrote:
>I just can't find the right place to look. My fuse block's terminals >(spring clips that hold the blades of the fuse) are loosening and in >one case, breaking. One fuse just falls out when I go over a bump. > >Where should I look for a fuse block? > >Thanks! Get one from a junkyard. You can take the terminals out to replace your bad ones. |
All times are GMT -4. The time now is 02:51 AM. |
© 2024 MH Sub I, LLC dba Internet Brands