Re: Liquid in my air filter housing
<Thoth1126@gmail.com> wrote in message news:1166448969.944740.139240@48g2000cwx.googlegro ups.com... > Disclaimer: The following post is in no way meant to help out, only > give you a quick chuckle. > > LoneGreyWolf via CarKB.com wrote: > >> Took the cover off my air filter housing today and discoverd about 1/2 >> cup of >> milky white fluid in the housing and coating the air filter. > > > LoneGrey: > Your Engine stroked itself out.... OMG! ROFLMAO! |
Re: Liquid in my air filter housing
<Thoth1126@gmail.com> wrote in message news:1166448969.944740.139240@48g2000cwx.googlegro ups.com... > Disclaimer: The following post is in no way meant to help out, only > give you a quick chuckle. > > LoneGreyWolf via CarKB.com wrote: > >> Took the cover off my air filter housing today and discoverd about 1/2 >> cup of >> milky white fluid in the housing and coating the air filter. > > > LoneGrey: > Your Engine stroked itself out.... OMG! ROFLMAO! |
Re: Liquid in my air filter housing
Mike Romain wrote:
>The Haynes CJ manual is the best one for the engine and under hood >wiring for the 258 YJ's. > >The ignition module is 'Waaaaaayyyyy' down under the washer bottle at >the bottom of the fender skirt. > >Here is a good site for all things 258: >http://home.sprynet.com/~dale02/list.htm > >Here are some specifics about killing that Ford emissions cpmputer: >http://home.sprynet.com/~dale02/ignmods.htm > >And: >http://www.off-road.com/jeep/jnutter1.htm > >I prefer to add two new wires when bypassing the computer by hooking the >orange and purple wires at the ignition module directly to the orange >and purple wires at the distributor rather than mess inside the >harness. Especially in a YJ, because the colors in the harness are >different than the CJ the article is written about. > >Here is an article on the HEI: >http://www.geocities.com/jeeperaz/hei.htm > >Here is a 'great' article on getting that Weber-Carter BBD purring at >idle: >http://jeep.off-road.com/jeep/articl....jsp?id=277064 > >Hope some of this helps, > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) > >> Do any of you have the diagrams for the HEI upgrade? My Chilton book puts >> the ignition control module where there is nothing. Picture the book gives >[quoted text clipped - 31 lines] >> Message posted via CarKB.com >> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200612/1 I am amazed at all the stuff you guys know and have url's for. I do all the reading I can and never find the stuff you guys give me. One guy on another site gave the address to a gas tank supplier with a 28 gallon tank for my 88 YJ that will replace the 15. Comes with new sending unit and all mounting hardware for $183.00. A new skid plate is only $69 more. Best I could find was $700 and buy my own new sending unit for a 20g. Thanks guys. -- Message posted via http://www.carkb.com |
Re: Liquid in my air filter housing
Mike Romain wrote:
>The Haynes CJ manual is the best one for the engine and under hood >wiring for the 258 YJ's. > >The ignition module is 'Waaaaaayyyyy' down under the washer bottle at >the bottom of the fender skirt. > >Here is a good site for all things 258: >http://home.sprynet.com/~dale02/list.htm > >Here are some specifics about killing that Ford emissions cpmputer: >http://home.sprynet.com/~dale02/ignmods.htm > >And: >http://www.off-road.com/jeep/jnutter1.htm > >I prefer to add two new wires when bypassing the computer by hooking the >orange and purple wires at the ignition module directly to the orange >and purple wires at the distributor rather than mess inside the >harness. Especially in a YJ, because the colors in the harness are >different than the CJ the article is written about. > >Here is an article on the HEI: >http://www.geocities.com/jeeperaz/hei.htm > >Here is a 'great' article on getting that Weber-Carter BBD purring at >idle: >http://jeep.off-road.com/jeep/articl....jsp?id=277064 > >Hope some of this helps, > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) > >> Do any of you have the diagrams for the HEI upgrade? My Chilton book puts >> the ignition control module where there is nothing. Picture the book gives >[quoted text clipped - 31 lines] >> Message posted via CarKB.com >> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200612/1 I am amazed at all the stuff you guys know and have url's for. I do all the reading I can and never find the stuff you guys give me. One guy on another site gave the address to a gas tank supplier with a 28 gallon tank for my 88 YJ that will replace the 15. Comes with new sending unit and all mounting hardware for $183.00. A new skid plate is only $69 more. Best I could find was $700 and buy my own new sending unit for a 20g. Thanks guys. -- Message posted via http://www.carkb.com |
Re: Liquid in my air filter housing
Mike Romain wrote:
>The Haynes CJ manual is the best one for the engine and under hood >wiring for the 258 YJ's. > >The ignition module is 'Waaaaaayyyyy' down under the washer bottle at >the bottom of the fender skirt. > >Here is a good site for all things 258: >http://home.sprynet.com/~dale02/list.htm > >Here are some specifics about killing that Ford emissions cpmputer: >http://home.sprynet.com/~dale02/ignmods.htm > >And: >http://www.off-road.com/jeep/jnutter1.htm > >I prefer to add two new wires when bypassing the computer by hooking the >orange and purple wires at the ignition module directly to the orange >and purple wires at the distributor rather than mess inside the >harness. Especially in a YJ, because the colors in the harness are >different than the CJ the article is written about. > >Here is an article on the HEI: >http://www.geocities.com/jeeperaz/hei.htm > >Here is a 'great' article on getting that Weber-Carter BBD purring at >idle: >http://jeep.off-road.com/jeep/articl....jsp?id=277064 > >Hope some of this helps, > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's >Canadian Off Road Trips Photos: Non members can still view! >Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >(More Off Road album links at bottom of the view page) > >> Do any of you have the diagrams for the HEI upgrade? My Chilton book puts >> the ignition control module where there is nothing. Picture the book gives >[quoted text clipped - 31 lines] >> Message posted via CarKB.com >> http://www.carkb.com/Uwe/Forums.aspx/jeep-cars/200612/1 I am amazed at all the stuff you guys know and have url's for. I do all the reading I can and never find the stuff you guys give me. One guy on another site gave the address to a gas tank supplier with a 28 gallon tank for my 88 YJ that will replace the 15. Comes with new sending unit and all mounting hardware for $183.00. A new skid plate is only $69 more. Best I could find was $700 and buy my own new sending unit for a 20g. Thanks guys. -- Message posted via http://www.carkb.com |
All times are GMT -4. The time now is 10:12 AM. |
© 2024 MH Sub I, LLC dba Internet Brands