Re: Lateral stress on sway bar mounts
Thanks for all the responses. I'll be making my own quick-discos. The reason
I can't return them is that they are the smallest set Skyjacker makes. I'll save them for my next lift or sell them later. I only have a 2" lift on my XJ so the sway bars position should be OK. Thanks again, Carl "Steve" <xjlifter@bogus.com> wrote in message news:lt69e.16586$Ln.745161@ursa-nb00s0.nbnet.nb.ca... > Hi Carl, > > You won't need much of a pin to hold your link - very little lateral > stress. You should, however, ensure that your swaybar arms are within 5 > degrees of OEM specs when the vehicle is at rest on a level surface: > > http://www.jksmfg.com/images/swaybar...20XJ_proof.jpg > > Using OEM links with a lift may pull your swaybar arms too low. If the > links you got with your Skyjacker kit are wrong, why not return them and > exchange for some that fit? > > Steve > http://xjeep.dyndns.org > > > Carl Saiyed wrote: > > The sway bar discos that came with the lift kit on my XJ are too tall - They > > bottom out on the fenderwell. I re-installed the stock links, but I would > > still like to have removeable links. The sway bar connects to the axle by > > the bottom of the link. The bottom of the link rides on a bolt that passes > > thru a bracket on the axle. The bolt has a 17mm head and is pretty easy to > > remove/re-install with two wrenches. > > > > What I want to do its buy a new bolt of the same size, but longer. Without > > threads would be ideal. Drill a hole in the center of the bolt, and insert a > > locking pin that came with my Skyjacker sway bar discos. This would allow me > > to pull the pin, and slide the bolt out, thus allowing for a budget easy > > sway bar disco without the need for wrenches. > > > > I'm concerned about the amount of lateral stress put on the bolt. The > > bracket on the axle cradles the bottom of the sway bar end link and looks > > like it holds all the lateral movement, while the bushing/bolt combination > > manages the vertical and fore/aft load. > > > > Does anyone know how much lateral stress is put on the bottom bolt? I don't > > want one pin breaking off and leaving me with half an anti sway system. Am I > > crazy? > > > > Thanks, > > > > Carl |
All times are GMT -4. The time now is 04:28 AM. |
© 2024 MH Sub I, LLC dba Internet Brands