Re: Just lifted my Jeep. now I cant get into 4wd
 

Wow youre a lifesaver! Thanks a bunch. Im going out there right now to do
it!

Before I purchased the lift I wouldnt have had any confidence to do this
myself. When it was being installed at the shop, I helped the guy out
because I wanted to learn (not to mention he was giving me a discount on
labor). Im just an 18 year old kid that should know more about my Jeep. I
saved my money since Feb. for this thing and the last few days have been the
best learning experience for me.

Now for another question: Is it possible to purchase an adjustable rear
trac bar? I need to adjust it cause the drivers side rear tire is rubbing
on the coil spring just a little when i hit bumps and such. The reason for
this is mainly because I am using the stock wheels, which I shouldnt be
(they are the next thing on my list once I get the money).

Thanks a bunch guys!


"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:L4fye.1985$CA.4847@news.uswest.net...
>I couldn't find a picture online and I hate doing things half way, so...
>Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.
>
> "Nathan Otis" <na@SPAM.smeat.net> wrote in message
> news:CLeye.1418$CA.4533@news.uswest.net...
>> You can absolutely do it yourself... Chock up the wheels, apply the
>> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
>> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
>> You'll see the bracket and bolt you need to adjust moving/ The adjustment
>> is REALLY easy once you see what it's doing.
>>
>> It's kinda tough to explain where the lever is, which is why I say have
>> someone move the t-case shifter while you look.
>>
>> Loosen that bolt, move it to where it needs to be and tighten it back up.
>> Take it for a spin down the block and see if you got it right... (you
>> probably will).
>> n.
>>
>> I'm go look for a picture...
>>
>>
>> "Brett Little" <brett.little@gmail.com> wrote in message
>> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>>> Hey guys, quick question.
>>>
>>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>>> (or neutral for that matter). The guy who did the lift at the offroad
>>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>>> today and I was wondering if i could do it myself.
>>>
>>> Any ideas?
>>>
>>
>>
>
>

Re: Just lifted my Jeep. now I cant get into 4wd
 

Wow youre a lifesaver! Thanks a bunch. Im going out there right now to do
it!

Before I purchased the lift I wouldnt have had any confidence to do this
myself. When it was being installed at the shop, I helped the guy out
because I wanted to learn (not to mention he was giving me a discount on
labor). Im just an 18 year old kid that should know more about my Jeep. I
saved my money since Feb. for this thing and the last few days have been the
best learning experience for me.

Now for another question: Is it possible to purchase an adjustable rear
trac bar? I need to adjust it cause the drivers side rear tire is rubbing
on the coil spring just a little when i hit bumps and such. The reason for
this is mainly because I am using the stock wheels, which I shouldnt be
(they are the next thing on my list once I get the money).

Thanks a bunch guys!


"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:L4fye.1985$CA.4847@news.uswest.net...
>I couldn't find a picture online and I hate doing things half way, so...
>Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.
>
> "Nathan Otis" <na@SPAM.smeat.net> wrote in message
> news:CLeye.1418$CA.4533@news.uswest.net...
>> You can absolutely do it yourself... Chock up the wheels, apply the
>> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
>> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
>> You'll see the bracket and bolt you need to adjust moving/ The adjustment
>> is REALLY easy once you see what it's doing.
>>
>> It's kinda tough to explain where the lever is, which is why I say have
>> someone move the t-case shifter while you look.
>>
>> Loosen that bolt, move it to where it needs to be and tighten it back up.
>> Take it for a spin down the block and see if you got it right... (you
>> probably will).
>> n.
>>
>> I'm go look for a picture...
>>
>>
>> "Brett Little" <brett.little@gmail.com> wrote in message
>> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>>> Hey guys, quick question.
>>>
>>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>>> (or neutral for that matter). The guy who did the lift at the offroad
>>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>>> today and I was wondering if i could do it myself.
>>>
>>> Any ideas?
>>>
>>
>>
>
>

Re: Just lifted my Jeep. now I cant get into 4wd
 

Wow youre a lifesaver! Thanks a bunch. Im going out there right now to do
it!

Before I purchased the lift I wouldnt have had any confidence to do this
myself. When it was being installed at the shop, I helped the guy out
because I wanted to learn (not to mention he was giving me a discount on
labor). Im just an 18 year old kid that should know more about my Jeep. I
saved my money since Feb. for this thing and the last few days have been the
best learning experience for me.

Now for another question: Is it possible to purchase an adjustable rear
trac bar? I need to adjust it cause the drivers side rear tire is rubbing
on the coil spring just a little when i hit bumps and such. The reason for
this is mainly because I am using the stock wheels, which I shouldnt be
(they are the next thing on my list once I get the money).

Thanks a bunch guys!


"Nathan Otis" <na@SPAM.smeat.net> wrote in message
news:L4fye.1985$CA.4847@news.uswest.net...
>I couldn't find a picture online and I hate doing things half way, so...
>Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.
>
> "Nathan Otis" <na@SPAM.smeat.net> wrote in message
> news:CLeye.1418$CA.4533@news.uswest.net...
>> You can absolutely do it yourself... Chock up the wheels, apply the
>> E-brake and make sure she isn't gonna move. Then crawl under there w/ the
>> 13mm wrench. Have someone sit in the jeep and move the t-case shifter.
>> You'll see the bracket and bolt you need to adjust moving/ The adjustment
>> is REALLY easy once you see what it's doing.
>>
>> It's kinda tough to explain where the lever is, which is why I say have
>> someone move the t-case shifter while you look.
>>
>> Loosen that bolt, move it to where it needs to be and tighten it back up.
>> Take it for a spin down the block and see if you got it right... (you
>> probably will).
>> n.
>>
>> I'm go look for a picture...
>>
>>
>> "Brett Little" <brett.little@gmail.com> wrote in message
>> news:yLdye.78258$j51.68589@tornado.texas.rr.com...
>>> Hey guys, quick question.
>>>
>>> Now that I have lifted my 02 TJ, I cannot get my t-case to go into 4wd
>>> (or neutral for that matter). The guy who did the lift at the offroad
>>> shop said it was a simple fix with a 13mm wrench, but he is not ehre
>>> today and I was wondering if i could do it myself.
>>>
>>> Any ideas?
>>>
>>
>>
>
>

Re: Just lifted my Jeep. now I cant get into 4wd
 

Hi Nathan,
Don't you, along with centering the lever in the hole through the
floorboard, make the hole bigger?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nathan Otis wrote:
>
> I couldn't find a picture online and I hate doing things half way, so...
> Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.

Re: Just lifted my Jeep. now I cant get into 4wd
 

Hi Nathan,
Don't you, along with centering the lever in the hole through the
floorboard, make the hole bigger?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nathan Otis wrote:
>
> I couldn't find a picture online and I hate doing things half way, so...
> Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.

Re: Just lifted my Jeep. now I cant get into 4wd
 

Hi Nathan,
Don't you, along with centering the lever in the hole through the
floorboard, make the hole bigger?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nathan Otis wrote:
>
> I couldn't find a picture online and I hate doing things half way, so...
> Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.

Re: Just lifted my Jeep. now I cant get into 4wd
 

Hi Nathan,
Don't you, along with centering the lever in the hole through the
floorboard, make the hole bigger?
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Nathan Otis wrote:
>
> I couldn't find a picture online and I hate doing things half way, so...
> Here's a road map.
>
> http://www.users.qwest.net/~b-otis/shift%20linkage/
> n.

Re: Just lifted my Jeep. now I cant get into 4wd
 

Some hafta, some don't. I lucked out. I'm also running a body lift and the
transfer case is lifted another couple inches above stock...

Bill brings up a good point though... If you get any rubbing, the tub can be
"adjusted" for clearance. You might wanna watch out for rubbing on the tub
under the shift boot in the Jeep, too. If you notice it's tough to get to
(or stay in) 2nd, 4th or reverse especially.
n.

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42C98B4C.6B194451@cox.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.
>

Re: Just lifted my Jeep. now I cant get into 4wd
 

Some hafta, some don't. I lucked out. I'm also running a body lift and the
transfer case is lifted another couple inches above stock...

Bill brings up a good point though... If you get any rubbing, the tub can be
"adjusted" for clearance. You might wanna watch out for rubbing on the tub
under the shift boot in the Jeep, too. If you notice it's tough to get to
(or stay in) 2nd, 4th or reverse especially.
n.

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42C98B4C.6B194451@cox.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.
>

Re: Just lifted my Jeep. now I cant get into 4wd
 

Some hafta, some don't. I lucked out. I'm also running a body lift and the
transfer case is lifted another couple inches above stock...

Bill brings up a good point though... If you get any rubbing, the tub can be
"adjusted" for clearance. You might wanna watch out for rubbing on the tub
under the shift boot in the Jeep, too. If you notice it's tough to get to
(or stay in) 2nd, 4th or reverse especially.
n.

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42C98B4C.6B194451@cox.net...
> Hi Nathan,
> Don't you, along with centering the lever in the hole through the
> floorboard, make the hole bigger?
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Nathan Otis wrote:
>>
>> I couldn't find a picture online and I hate doing things half way, so...
>> Here's a road map.
>>
>> http://www.users.qwest.net/~b-otis/shift%20linkage/
>> n.
>