Re: jeep welding trailer write up
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-6BF96B.14481626122003@corp.newsfeeds.com... > Dude, you need a vice on that trailer, and a small welding table. > Perhaps in the receiver hitch. see "I welded a 2" receiver hitch to the back of the trailer frame. This will allow me to pull an additional welding trailer if need be, and it also allows me the flexibility of using hitch accessories such as the basket pictured above for hauling additional tools and equipment. I mounted my vice onto a piece of 2x2x.125 tubing that I'll keep in the large toolbox. When I need a vice, I'll simply slide it into the receiver. I've done the same thing with my bench grinder, and even a small portable welding table." :-) > Nice job. thanks! i hated to finish it up because i enjoyed the entire process....figured it was time to wrap it up so i could actually make some money with it though. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-8315E4.15294126122003@corp.newsfeeds.com... > I need a vice on it too. bolt it to a piece of 2"x2" tubing and mount a receiver on the trailer. its pretty handy being able to keep those things out of the weather, and just slide them in the receiver when its time to use them. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-8315E4.15294126122003@corp.newsfeeds.com... > I need a vice on it too. bolt it to a piece of 2"x2" tubing and mount a receiver on the trailer. its pretty handy being able to keep those things out of the weather, and just slide them in the receiver when its time to use them. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-8315E4.15294126122003@corp.newsfeeds.com... > I need a vice on it too. bolt it to a piece of 2"x2" tubing and mount a receiver on the trailer. its pretty handy being able to keep those things out of the weather, and just slide them in the receiver when its time to use them. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FEC9EF8.16FB62A9@sympatico.ca... > Sweet job! thanks mike! > How is the tongue weight? the tongue weight varies depending upon how much stuff i have in the front tool box. in those pics there is about 100 pounds of tongue weight. > That almost looks back heavy to me, but photos don't always tell.... yeah, photo angle. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FEC9EF8.16FB62A9@sympatico.ca... > Sweet job! thanks mike! > How is the tongue weight? the tongue weight varies depending upon how much stuff i have in the front tool box. in those pics there is about 100 pounds of tongue weight. > That almost looks back heavy to me, but photos don't always tell.... yeah, photo angle. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"Mike Romain" <romainm@sympatico.ca> wrote in message
news:3FEC9EF8.16FB62A9@sympatico.ca... > Sweet job! thanks mike! > How is the tongue weight? the tongue weight varies depending upon how much stuff i have in the front tool box. in those pics there is about 100 pounds of tongue weight. > That almost looks back heavy to me, but photos don't always tell.... yeah, photo angle. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"DougW" <post.replies@invalid.address> wrote in message
news:Xu1Hb.25374$PK3.11178@okepread01... > Nice. thanks doug. > Only thing I see that might be a problem is rust > forming under those plastic bins ill only use the trailer until the rubicon sells since i prefer to work off the back of a flatbed truck. > He stuck 2" receivers along both sides of the trailer. he sounds like me. since doing the write up ive added two more receivers to the side for holding a ladder rack. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"DougW" <post.replies@invalid.address> wrote in message
news:Xu1Hb.25374$PK3.11178@okepread01... > Nice. thanks doug. > Only thing I see that might be a problem is rust > forming under those plastic bins ill only use the trailer until the rubicon sells since i prefer to work off the back of a flatbed truck. > He stuck 2" receivers along both sides of the trailer. he sounds like me. since doing the write up ive added two more receivers to the side for holding a ladder rack. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
Re: jeep welding trailer write up
"DougW" <post.replies@invalid.address> wrote in message
news:Xu1Hb.25374$PK3.11178@okepread01... > Nice. thanks doug. > Only thing I see that might be a problem is rust > forming under those plastic bins ill only use the trailer until the rubicon sells since i prefer to work off the back of a flatbed truck. > He stuck 2" receivers along both sides of the trailer. he sounds like me. since doing the write up ive added two more receivers to the side for holding a ladder rack. -- Nathan W. Collier http://7SlotGrille.com http://UtilityOffRoad.com |
All times are GMT -4. The time now is 09:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands