Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   jeep 4L oil pressure (https://www.jeepscanada.com/jeep-mailing-list-32/jeep-4l-oil-pressure-29307/)

ansky 06-30-2005 03:32 PM

jeep 4L oil pressure
 
171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
at 60mph then stopping. I just replaced the oil pump and still have the
same problem, only worse now. It is an aftermarket pump, could I have just
installed a bad pump?


Earle Horton 06-30-2005 03:42 PM

Re: jeep 4L oil pressure
 
Oil pressure depends on pump quality and bearing clearance both. If you put
a new pump on an engine with bad bearings, then you didn't help yourself
much. Did you check the accuracy of the oil gauge before installing the new
pump? Isolated oil pump failures are rare, because the pump is the best
lubricated part of the engine. They do happen, of course, but they are
rare.

Earle

"ansky" <anskyjs@yahoo.com> wrote in message
news:46eff06e181f811b4543e3b5037322ff@localhost.ta lkaboutautos.com...
> 171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
> at 60mph then stopping. I just replaced the oil pump and still have the
> same problem, only worse now. It is an aftermarket pump, could I have just
> installed a bad pump?
>




Earle Horton 06-30-2005 03:42 PM

Re: jeep 4L oil pressure
 
Oil pressure depends on pump quality and bearing clearance both. If you put
a new pump on an engine with bad bearings, then you didn't help yourself
much. Did you check the accuracy of the oil gauge before installing the new
pump? Isolated oil pump failures are rare, because the pump is the best
lubricated part of the engine. They do happen, of course, but they are
rare.

Earle

"ansky" <anskyjs@yahoo.com> wrote in message
news:46eff06e181f811b4543e3b5037322ff@localhost.ta lkaboutautos.com...
> 171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
> at 60mph then stopping. I just replaced the oil pump and still have the
> same problem, only worse now. It is an aftermarket pump, could I have just
> installed a bad pump?
>




Earle Horton 06-30-2005 03:42 PM

Re: jeep 4L oil pressure
 
Oil pressure depends on pump quality and bearing clearance both. If you put
a new pump on an engine with bad bearings, then you didn't help yourself
much. Did you check the accuracy of the oil gauge before installing the new
pump? Isolated oil pump failures are rare, because the pump is the best
lubricated part of the engine. They do happen, of course, but they are
rare.

Earle

"ansky" <anskyjs@yahoo.com> wrote in message
news:46eff06e181f811b4543e3b5037322ff@localhost.ta lkaboutautos.com...
> 171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
> at 60mph then stopping. I just replaced the oil pump and still have the
> same problem, only worse now. It is an aftermarket pump, could I have just
> installed a bad pump?
>




Earle Horton 06-30-2005 03:42 PM

Re: jeep 4L oil pressure
 
Oil pressure depends on pump quality and bearing clearance both. If you put
a new pump on an engine with bad bearings, then you didn't help yourself
much. Did you check the accuracy of the oil gauge before installing the new
pump? Isolated oil pump failures are rare, because the pump is the best
lubricated part of the engine. They do happen, of course, but they are
rare.

Earle

"ansky" <anskyjs@yahoo.com> wrote in message
news:46eff06e181f811b4543e3b5037322ff@localhost.ta lkaboutautos.com...
> 171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
> at 60mph then stopping. I just replaced the oil pump and still have the
> same problem, only worse now. It is an aftermarket pump, could I have just
> installed a bad pump?
>




ansky 06-30-2005 03:58 PM

Re: jeep 4L oil pressure
 
Thank you Earle. I was thinking that was the problem but, I was in denial
and hopping for another answer.


ansky 06-30-2005 03:58 PM

Re: jeep 4L oil pressure
 
Thank you Earle. I was thinking that was the problem but, I was in denial
and hopping for another answer.


ansky 06-30-2005 03:58 PM

Re: jeep 4L oil pressure
 
Thank you Earle. I was thinking that was the problem but, I was in denial
and hopping for another answer.


ansky 06-30-2005 03:58 PM

Re: jeep 4L oil pressure
 
Thank you Earle. I was thinking that was the problem but, I was in denial
and hopping for another answer.


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 06-30-2005 04:27 PM

Re: jeep 4L oil pressure
 
Verify the oil pressure with a Real gauge, like all Hot Rodders use
aftermarket sets by Stewart Warner: http://www.stewartwarner.com/ or
Auto Meter: http://www.autometer.com/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

ansky wrote:
>
> 171,000 mi. on 96 4L. Oil pressure drop too 0 after 4 or 5 mi. of running
> at 60mph then stopping. I just replaced the oil pump and still have the
> same problem, only worse now. It is an aftermarket pump, could I have just
> installed a bad pump?



All times are GMT -4. The time now is 03:36 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.11441 seconds with 8 queries