Installing standard trailer / boat railer hitch connector
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
The connector should have the directions in it.
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
The connector should have the directions in it.
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
The connector should have the directions in it.
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
FROM MEMORY
Red = running lights
Brn = left turn/brake
Yel = right turn/brake
Wht = ground
Having said all of that, I think there is a flat 4-pin connector hiding up
inside the fender that you can plug an extension cord in to and bring the
connector out to the hitch.
<josh00@comcast.net> wrote in message
news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> Anyone have instructions or a website to install regular 4 conductor
> trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> hitch, but no connector getting my lights on for my small bass boat
> trailer. Basically I need the color codes and where it is best to
> splice into. I could cut and probe to find how to splice in but I would
> rather do it the correct way the first time. thanks
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
Sorry, my memory is not what is used to be.
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
Sorry, my memory is not what is used to be.
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
Sorry, my memory is not what is used to be.
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
Guest
Posts: n/a
Re: Installing standard trailer / boat railer hitch connector
Sorry, my memory is not what is used to be.
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
The colors are WHT, BRN, YEL, & GRN. There is no Red.
BRN = running lughts
WHT = ground
YEL = Left turn
GRN = Right turn
The Turn Signals and the Brake Lights are the same wire for the respective
sides.
"Jeff Strickland" <spamcatcher@yahoo.net> wrote in message
news:sbidnb9YvKSDLsffRVn-oQ@ez2.net...
> The connector should have the directions in it.
>
> FROM MEMORY
> Red = running lights
> Brn = left turn/brake
> Yel = right turn/brake
> Wht = ground
>
> Having said all of that, I think there is a flat 4-pin connector hiding up
> inside the fender that you can plug an extension cord in to and bring the
> connector out to the hitch.
>
>
> <josh00@comcast.net> wrote in message
> news:1113160698.345982.308260@z14g2000cwz.googlegr oups.com...
> > Anyone have instructions or a website to install regular 4 conductor
> > trailer connector to a 92 4.0 YJ Wrangler? I already have a reciever
> > hitch, but no connector getting my lights on for my small bass boat
> > trailer. Basically I need the color codes and where it is best to
> > splice into. I could cut and probe to find how to splice in but I would
> > rather do it the correct way the first time. thanks
> >
>
>
Thread
Thread Starter
Forum
Replies
Last Post
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)