identifying rear axle 89 yj
 

these are the numbers I managed to get off the tag.
5300387 possibly a 1 at the end
07 605295
That is about all I can see
my question is what ratio and is it limited slip.
thanx for the help

Re: identifying rear axle 89 yj
 

Why don't you just count to be sure? Tags mean crap usually on old
vehicles, it could have been changed 10 times.

If you jack up both rear wheels and turn one, the other will spin
opposite if you have an open diff and spin the same way with a limited
slip or locker.

With one wheel in the air only and it in neutral, you put a chalk mark
at the bottom of the wheel and on one ear of the rear u-joint. You then
turn the tire two rotations while counting the driveshaft turns. If you
get 3.88 turns of the driveshaft, you have 3.88 gears.

My CJ7 has 3.31 turns.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

Why don't you just count to be sure? Tags mean crap usually on old
vehicles, it could have been changed 10 times.

If you jack up both rear wheels and turn one, the other will spin
opposite if you have an open diff and spin the same way with a limited
slip or locker.

With one wheel in the air only and it in neutral, you put a chalk mark
at the bottom of the wheel and on one ear of the rear u-joint. You then
turn the tire two rotations while counting the driveshaft turns. If you
get 3.88 turns of the driveshaft, you have 3.88 gears.

My CJ7 has 3.31 turns.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

Why don't you just count to be sure? Tags mean crap usually on old
vehicles, it could have been changed 10 times.

If you jack up both rear wheels and turn one, the other will spin
opposite if you have an open diff and spin the same way with a limited
slip or locker.

With one wheel in the air only and it in neutral, you put a chalk mark
at the bottom of the wheel and on one ear of the rear u-joint. You then
turn the tire two rotations while counting the driveshaft turns. If you
get 3.88 turns of the driveshaft, you have 3.88 gears.

My CJ7 has 3.31 turns.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

Why don't you just count to be sure? Tags mean crap usually on old
vehicles, it could have been changed 10 times.

If you jack up both rear wheels and turn one, the other will spin
opposite if you have an open diff and spin the same way with a limited
slip or locker.

With one wheel in the air only and it in neutral, you put a chalk mark
at the bottom of the wheel and on one ear of the rear u-joint. You then
turn the tire two rotations while counting the driveshaft turns. If you
get 3.88 turns of the driveshaft, you have 3.88 gears.

My CJ7 has 3.31 turns.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

The tags I'm familiar with were bolted between the two left axle
cover bolts, and rusted over as see at:
http://www.----------.com/chrys8dana35covers.jpg and had the axle ratio
stamped without the decimal. If you have the four cylinder it'll be
4.11. And a separate tag saying use limited slip additive if you have
one. You may email and request a build order via:
http://www.jeep.com/universal/J/inde...r=wccs&prefix=
and find out exatly what you have.
God Bless America, ßill O|||||||O
mailto:--------------------

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

The tags I'm familiar with were bolted between the two left axle
cover bolts, and rusted over as see at:
http://www.----------.com/chrys8dana35covers.jpg and had the axle ratio
stamped without the decimal. If you have the four cylinder it'll be
4.11. And a separate tag saying use limited slip additive if you have
one. You may email and request a build order via:
http://www.jeep.com/universal/J/inde...r=wccs&prefix=
and find out exatly what you have.
God Bless America, ßill O|||||||O
mailto:--------------------

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

The tags I'm familiar with were bolted between the two left axle
cover bolts, and rusted over as see at:
http://www.----------.com/chrys8dana35covers.jpg and had the axle ratio
stamped without the decimal. If you have the four cylinder it'll be
4.11. And a separate tag saying use limited slip additive if you have
one. You may email and request a build order via:
http://www.jeep.com/universal/J/inde...r=wccs&prefix=
and find out exatly what you have.
God Bless America, ßill O|||||||O
mailto:--------------------

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help

Re: identifying rear axle 89 yj
 

The tags I'm familiar with were bolted between the two left axle
cover bolts, and rusted over as see at:
http://www.----------.com/chrys8dana35covers.jpg and had the axle ratio
stamped without the decimal. If you have the four cylinder it'll be
4.11. And a separate tag saying use limited slip additive if you have
one. You may email and request a build order via:
http://www.jeep.com/universal/J/inde...r=wccs&prefix=
and find out exatly what you have.
God Bless America, ßill O|||||||O
mailto:--------------------

wraithyjeep wrote:
>
> these are the numbers I managed to get off the tag.
> 5300387 possibly a 1 at the end
> 07 605295
> That is about all I can see
> my question is what ratio and is it limited slip.
> thanx for the help