hex size for brake caliper?????
sorry fellas - kind of an urgent issue - just pulled off the wheel to
do the brake pads and replace the rotors and i cant seem to find a hex wrench that will fit the @#*#* caliper pins (in order to pull the pads) - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - could it be? i'd appreciate a speedy response as she's sitting in the driveway on jackstands and i have to be at work at 8 tomorrow! thanks in advance, b |
Re: hex size for brake caliper?????
They might be torx, not allen?
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
They might be torx, not allen?
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
They might be torx, not allen?
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Jeep uses 1/4 inch and 7 mm Allen heads...
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Jeep uses 1/4 inch and 7 mm Allen heads...
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Jeep uses 1/4 inch and 7 mm Allen heads...
"bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Sears sells the socket for $5.49 but should be available at any auto parts
store... http://www.sears.com/sr/javasr/searc...ord=7+mm+allen "bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Sears sells the socket for $5.49 but should be available at any auto parts
store... http://www.sears.com/sr/javasr/searc...ord=7+mm+allen "bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
Re: hex size for brake caliper?????
Sears sells the socket for $5.49 but should be available at any auto parts
store... http://www.sears.com/sr/javasr/searc...ord=7+mm+allen "bobvonbob" <bennettvonbennett@gmail.com> wrote in message news:1151451191.981267.188410@b68g2000cwa.googlegr oups.com... > sorry fellas - kind of an urgent issue - just pulled off the wheel to > do the brake pads and replace the rotors and i cant seem to find a hex > wrench that will fit the @#*#* caliper pins (in order to pull the pads) > - i've tried 1/4" (too small), 5/16" (too big), 6mm (too small) and 8mm > (too big) - what gives? i dont think i've ever even SEEN a 7mm allen - > could it be? > i'd appreciate a speedy response as she's sitting in the driveway on > jackstands and i have to be at work at 8 tomorrow! > thanks in advance, > b > |
All times are GMT -4. The time now is 12:09 AM. |
© 2024 MH Sub I, LLC dba Internet Brands