Help with TJ Lift
 

I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
problem that I don't understand. When the front end goes down on a mild
stop one of the exhaust pipes that is closest to the front differential yoke
is being hit by the yoke while it is spinning. It looks like before the
lift was put in, the yoke would have been above the pipe and would cause no
problem but now the yoke is below the pipe and it hits it. I looked for
something out of place under the vehicle but I don't see anything. Is this
normal for the lift kit and this year and the people that installed it did
not tell me or what.


thanks

Re: Help with TJ Lift
 

Hi Dennis,
I would check your motor mounts, to make sure your engine is still
in the right position.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

Hi Dennis,
I would check your motor mounts, to make sure your engine is still
in the right position.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

Hi Dennis,
I would check your motor mounts, to make sure your engine is still
in the right position.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

That usually means you have a bad engine mount or bad tranny mount.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

That usually means you have a bad engine mount or bad tranny mount.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

That usually means you have a bad engine mount or bad tranny mount.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Dennis Croll wrote:
>
> I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> problem that I don't understand. When the front end goes down on a mild
> stop one of the exhaust pipes that is closest to the front differential yoke
> is being hit by the yoke while it is spinning. It looks like before the
> lift was put in, the yoke would have been above the pipe and would cause no
> problem but now the yoke is below the pipe and it hits it. I looked for
> something out of place under the vehicle but I don't see anything. Is this
> normal for the lift kit and this year and the people that installed it did
> not tell me or what.
>
> thanks

Re: Help with TJ Lift
 

I looked at the motor mounts but did not see anything that I thought was out
of place. What should I look for.

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:442DE0E7.9D230773@cox.net...
> Hi Dennis,
> I would check your motor mounts, to make sure your engine is still
> in the right position.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis Croll wrote:
> >
> > I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> > problem that I don't understand. When the front end goes down on a mild
> > stop one of the exhaust pipes that is closest to the front differential
yoke
> > is being hit by the yoke while it is spinning. It looks like before the
> > lift was put in, the yoke would have been above the pipe and would cause
no
> > problem but now the yoke is below the pipe and it hits it. I looked for
> > something out of place under the vehicle but I don't see anything. Is
this
> > normal for the lift kit and this year and the people that installed it
did
> > not tell me or what.
> >
> > thanks

Re: Help with TJ Lift
 

I looked at the motor mounts but did not see anything that I thought was out
of place. What should I look for.

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:442DE0E7.9D230773@cox.net...
> Hi Dennis,
> I would check your motor mounts, to make sure your engine is still
> in the right position.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis Croll wrote:
> >
> > I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> > problem that I don't understand. When the front end goes down on a mild
> > stop one of the exhaust pipes that is closest to the front differential
yoke
> > is being hit by the yoke while it is spinning. It looks like before the
> > lift was put in, the yoke would have been above the pipe and would cause
no
> > problem but now the yoke is below the pipe and it hits it. I looked for
> > something out of place under the vehicle but I don't see anything. Is
this
> > normal for the lift kit and this year and the people that installed it
did
> > not tell me or what.
> >
> > thanks

Re: Help with TJ Lift
 

I looked at the motor mounts but did not see anything that I thought was out
of place. What should I look for.

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:442DE0E7.9D230773@cox.net...
> Hi Dennis,
> I would check your motor mounts, to make sure your engine is still
> in the right position.
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Dennis Croll wrote:
> >
> > I have a 2000 Jeep TJ that I had a 3 inch BDS Lift installed. I have a
> > problem that I don't understand. When the front end goes down on a mild
> > stop one of the exhaust pipes that is closest to the front differential
yoke
> > is being hit by the yoke while it is spinning. It looks like before the
> > lift was put in, the yoke would have been above the pipe and would cause
no
> > problem but now the yoke is below the pipe and it hits it. I looked for
> > something out of place under the vehicle but I don't see anything. Is
this
> > normal for the lift kit and this year and the people that installed it
did
> > not tell me or what.
> >
> > thanks