HELP! In the process of replacing tranny stabilizer
 

I've disassembled the tranny stabilizer. I've got the two bushings and the
new stud but can't figure out how it goes back together...duh! Anyone have
any diagrams of this simple thing?!? I know which end the stud is up,..but
not sure where or what side of the tranny rail they go on.
Thanks!
Allen
83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

I can email you a photo.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

I can email you a photo.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

I can email you a photo.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

Hi Allen,
Do you have cups on both sides of the cross member to hold your
grommets: http://www.----------.com/Dana18.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

Hi Allen,
Do you have cups on both sides of the cross member to hold your
grommets: http://www.----------.com/Dana18.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

Hi Allen,
Do you have cups on both sides of the cross member to hold your
grommets: http://www.----------.com/Dana18.jpg
God Bless America, ßill O|||||||O
mailto:--------------------

ABanks5@columbus.rr.com wrote:
>
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7

Re: HELP! In the process of replacing tranny stabilizer
 

One of the rubber pucks goes on each side of the brace on the tcase/trans.
Then the large washers, then lock washers, then nuts go on.





<ABanks5@columbus.rr.com> wrote in message
news:%bQzb.38$%P6.0@fe1.columbus.rr.com...
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7
>
>

Re: HELP! In the process of replacing tranny stabilizer
 

One of the rubber pucks goes on each side of the brace on the tcase/trans.
Then the large washers, then lock washers, then nuts go on.





<ABanks5@columbus.rr.com> wrote in message
news:%bQzb.38$%P6.0@fe1.columbus.rr.com...
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7
>
>

Re: HELP! In the process of replacing tranny stabilizer
 

One of the rubber pucks goes on each side of the brace on the tcase/trans.
Then the large washers, then lock washers, then nuts go on.





<ABanks5@columbus.rr.com> wrote in message
news:%bQzb.38$%P6.0@fe1.columbus.rr.com...
> I've disassembled the tranny stabilizer. I've got the two bushings and the
> new stud but can't figure out how it goes back together...duh! Anyone have
> any diagrams of this simple thing?!? I know which end the stud is up,..but
> not sure where or what side of the tranny rail they go on.
> Thanks!
> Allen
> 83 CJ7
>
>