Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
c did pass the time by typing:
> "Just Taylor" wrote ... >> On Tue, 20 Sep 2005 20:36:38 -0500, "DougW" wrote: >> >>> NT did pass the time by typing: >>>> Hi: >>>> >>>> Hoping that someone can help with this: >>>> >>>> I'm considering replacing all of my suspension bushings with nylon (is that >>>> right) replacements to try to tighten up the ride a bit. Does anyone know >>>> of a reasonably priced online source for a bushing kit? Can you recommend >>>> a particular kit? Would it be difficult for a reasonably experience home >>>> mechanic to install the various bits? Any other recommendations on >>>> suspension parts to replace in order to tighten things up a bit (sorry if >>>> that's a wide open question). >>> >>> Your looking at a lot of work. >>> >>> Personally I use Energy Suspension parts. The fit is spot on and >>> the kits are complete. >>> >>> If I were you, I'd start with the antisway bar and track bar bushings. >> >> Any major squeaks from the poly bushings? Like Chris says, you just have to make sure the old parts are nice and clean, then use the included lube. I've been running poly on the ZJ for almost eight years. > The urethane bushings will not squeak if they are assembled properly. I have > used them on a few vehicles, and there are 2 key things that need to be > done. First, all of the parts that touch the bushing need to be free of dirt > and any gritty substances when they are assembled, and second, they need to > be lubricated with the proper grease. Use the lubricant that the bushing > manufacturer recommends. |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
c did pass the time by typing:
> "Just Taylor" wrote ... >> On Tue, 20 Sep 2005 20:36:38 -0500, "DougW" wrote: >> >>> NT did pass the time by typing: >>>> Hi: >>>> >>>> Hoping that someone can help with this: >>>> >>>> I'm considering replacing all of my suspension bushings with nylon (is that >>>> right) replacements to try to tighten up the ride a bit. Does anyone know >>>> of a reasonably priced online source for a bushing kit? Can you recommend >>>> a particular kit? Would it be difficult for a reasonably experience home >>>> mechanic to install the various bits? Any other recommendations on >>>> suspension parts to replace in order to tighten things up a bit (sorry if >>>> that's a wide open question). >>> >>> Your looking at a lot of work. >>> >>> Personally I use Energy Suspension parts. The fit is spot on and >>> the kits are complete. >>> >>> If I were you, I'd start with the antisway bar and track bar bushings. >> >> Any major squeaks from the poly bushings? Like Chris says, you just have to make sure the old parts are nice and clean, then use the included lube. I've been running poly on the ZJ for almost eight years. > The urethane bushings will not squeak if they are assembled properly. I have > used them on a few vehicles, and there are 2 key things that need to be > done. First, all of the parts that touch the bushing need to be free of dirt > and any gritty substances when they are assembled, and second, they need to > be lubricated with the proper grease. Use the lubricant that the bushing > manufacturer recommends. |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
c did pass the time by typing:
> "Just Taylor" wrote ... >> On Tue, 20 Sep 2005 20:36:38 -0500, "DougW" wrote: >> >>> NT did pass the time by typing: >>>> Hi: >>>> >>>> Hoping that someone can help with this: >>>> >>>> I'm considering replacing all of my suspension bushings with nylon (is that >>>> right) replacements to try to tighten up the ride a bit. Does anyone know >>>> of a reasonably priced online source for a bushing kit? Can you recommend >>>> a particular kit? Would it be difficult for a reasonably experience home >>>> mechanic to install the various bits? Any other recommendations on >>>> suspension parts to replace in order to tighten things up a bit (sorry if >>>> that's a wide open question). >>> >>> Your looking at a lot of work. >>> >>> Personally I use Energy Suspension parts. The fit is spot on and >>> the kits are complete. >>> >>> If I were you, I'd start with the antisway bar and track bar bushings. >> >> Any major squeaks from the poly bushings? Like Chris says, you just have to make sure the old parts are nice and clean, then use the included lube. I've been running poly on the ZJ for almost eight years. > The urethane bushings will not squeak if they are assembled properly. I have > used them on a few vehicles, and there are 2 key things that need to be > done. First, all of the parts that touch the bushing need to be free of dirt > and any gritty substances when they are assembled, and second, they need to > be lubricated with the proper grease. Use the lubricant that the bushing > manufacturer recommends. |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
Hi Doug:
Thanks for your note. Have you got a link to an online source that you can provide? Let me know. Thanks. -- "DougW" <post.replies@invalid.address> wrote in message news:DO2Ye.3840$P34.3555@okepread07... > NT did pass the time by typing: >> Hi: >> >> Hoping that someone can help with this: >> >> I'm considering replacing all of my suspension bushings with nylon (is >> that >> right) replacements to try to tighten up the ride a bit. Does anyone >> know >> of a reasonably priced online source for a bushing kit? Can you >> recommend a >> particular kit? Would it be difficult for a reasonably experience home >> mechanic to install the various bits? Any other recommendations on >> suspension parts to replace in order to tighten things up a bit (sorry if >> that's a wide open question). > > Your looking at a lot of work. > > Personally I use Energy Suspension parts. The fit is spot on and > the kits are complete. > > If I were you, I'd start with the antisway bar and track bar bushings. > > -- > DougW > |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
Hi Doug:
Thanks for your note. Have you got a link to an online source that you can provide? Let me know. Thanks. -- "DougW" <post.replies@invalid.address> wrote in message news:DO2Ye.3840$P34.3555@okepread07... > NT did pass the time by typing: >> Hi: >> >> Hoping that someone can help with this: >> >> I'm considering replacing all of my suspension bushings with nylon (is >> that >> right) replacements to try to tighten up the ride a bit. Does anyone >> know >> of a reasonably priced online source for a bushing kit? Can you >> recommend a >> particular kit? Would it be difficult for a reasonably experience home >> mechanic to install the various bits? Any other recommendations on >> suspension parts to replace in order to tighten things up a bit (sorry if >> that's a wide open question). > > Your looking at a lot of work. > > Personally I use Energy Suspension parts. The fit is spot on and > the kits are complete. > > If I were you, I'd start with the antisway bar and track bar bushings. > > -- > DougW > |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
Hi Doug:
Thanks for your note. Have you got a link to an online source that you can provide? Let me know. Thanks. -- "DougW" <post.replies@invalid.address> wrote in message news:DO2Ye.3840$P34.3555@okepread07... > NT did pass the time by typing: >> Hi: >> >> Hoping that someone can help with this: >> >> I'm considering replacing all of my suspension bushings with nylon (is >> that >> right) replacements to try to tighten up the ride a bit. Does anyone >> know >> of a reasonably priced online source for a bushing kit? Can you >> recommend a >> particular kit? Would it be difficult for a reasonably experience home >> mechanic to install the various bits? Any other recommendations on >> suspension parts to replace in order to tighten things up a bit (sorry if >> that's a wide open question). > > Your looking at a lot of work. > > Personally I use Energy Suspension parts. The fit is spot on and > the kits are complete. > > If I were you, I'd start with the antisway bar and track bar bushings. > > -- > DougW > |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
NT did pass the time by typing:
> Hi Doug: > > Thanks for your note. > > Have you got a link to an online source that you can provide? Let me know. > Thanks. http://www.4wheelparts.com - I use them because they are local might be cheaper out there though. http://www.energysuspension.com - online catalog, no prices, not much actually http://www.suspension.com/jeep.htm - another catalog with prices -- DougW |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
NT did pass the time by typing:
> Hi Doug: > > Thanks for your note. > > Have you got a link to an online source that you can provide? Let me know. > Thanks. http://www.4wheelparts.com - I use them because they are local might be cheaper out there though. http://www.energysuspension.com - online catalog, no prices, not much actually http://www.suspension.com/jeep.htm - another catalog with prices -- DougW |
Re: Help With Bushing Kit - 89 Jeep Cherokee LTD
NT did pass the time by typing:
> Hi Doug: > > Thanks for your note. > > Have you got a link to an online source that you can provide? Let me know. > Thanks. http://www.4wheelparts.com - I use them because they are local might be cheaper out there though. http://www.energysuspension.com - online catalog, no prices, not much actually http://www.suspension.com/jeep.htm - another catalog with prices -- DougW |
"Just Taylor" is THE notorious x-no-archive stalker/spammer
For information on this anonymous stalker "Just Taylor"
aka "Taylor Jimenez" (a true alias), His real name is Joe Jared (Stephen Joseph Jared). Joe Jared runs oretek.com (www.oretek.com) and runs osirusoft.com (www.osirusoft.com). Joe Jared ("Taylor Jimenez") is THE x-no-archive stalker, author of 10,000 off-topic personal harassment and defamation posts. bradjesness.com is an anonymously registered abuse domain, like "Taylor's" wilhelp.com (anonymous via domainsbyproxy.com) see the FOLLOWING NON-ANONYMOUS WEB SITES FOR INFORMATION ON THIS WORST STALKER ON ALL OF USENET (newsgroups): : http://cyberper.cnc.net/anonCowardStalker.htm and http://cyberper.cnc.net/JaredIsJimenez.htm and http://cyberper.cnc.net/joe.html *** Complete CABAL Internet Abusers and Spam S**theads *** www.lart.com with 16,000 spam advertisements of the abuse domain on Usenet. <-- this is Joe Jared's domain See link: http://tinyurl.com/8vx45 Also let me provide the EVIDENCE links for : "http://www.insurgent.org" (45,000) http://tinyurl.com/cc29d and "http://www.databasix com" (7800+) http://tinyurl.com/dg7eu (this is "Taylor Jimenez's" LONG TIME HOST, i.e. a good friend of JOE JARED) and "www.petitmorte.net" (in 46,000+ posts ) http://tinyurl.com/c94my Such are the supposed anti-spammer hypocrite stalking psychopath auk-tards!!! wilhelp and spamblocked.com are in the same league with abuse domains like those of their CABAL friends, such as Cannon's insurgent.org (45,000 mentions of "http://www.insurgent.org" and Burnore's databasix.com (7800+ mentions of "http://www.databasix com"), OR WORSE. NOW evidence w/r to these 2 other domains, just noted. Here are links to spam advertisements of two web sites at 216.99.211.236 Note among 216.99.211.236 pages the HUGE number of spam- advertising of CONTENTLESS, off-topic, personal abuse pages. These two groups.google.com searches are ALL 216.99.211.236 pages -- ALL at this one IP number (i.e. wilhelp.com IP == spamblocked.com IP). http://tinyurl.com/dtvq7 (13,000+ posts spam-advertisements of a commercial/for-profit domain) (THIS IS RICH TIETJENS' DOMAIN AND THE PRESENT HOST OF JOE JARED'S wilhelp.com) and http://tinyurl.com/d23n7 (7000+ spam-advertisements of the personal abuse domain with NO content of any use) (this IS Joe Jared's domain) <-- the 2 domains just noted for are BOTH Rich Tietjens' hosted domains, all at one IP address on the www.spamblocked.com server **** This is being Posted for the Public Good **** Based on personal abuse web page content and extreme spam and stalking/harassment abuse on Usenet (and for other reasons -- such as the gang of punks that runs them), all of the following domains have been determined to be CABAL abuse domains: insurgent.org (IP IN the small IP range of tsbbearings.com) databasix.com (abuse domain run by a convicted child molester and previous host to wilhelp.com before spamblocked.com) wilhelp.com (with the exact same IP number as www.spamblocked.com and a Joe Jared domain) petitmorte.net lart.com (like wilhelp.com and hell.flame-wars.org, this is a Joe Jared domain) All of these domains have HUGE amounts of spam-advertising of their personal abuse web sites AND typically they host domains that are anonymous (via domainsbyproxy.com). Furthermore, they are proven "friends" (i.e. this is a gang), where often the "mirror" each others' web sites (in other words, to a large extent, they host copies of the same personal libelous abuse web sites). They almost all go by true aliases. Ironically, they all oppose "spam", BUT given the huge amounts of off-topic spam posts they make, we can ONLY be understood as : the posting of ANY content they do not like. This is backed up by the fact that they PUNISH people who post on-topic stuff they don't like. The domains contain no legitimate content and exist only to abuse. I hope some people will join me in making people aware that these domains are ANONYMOUS and NOT run by "regular people" but by criminal- type psychopaths who are associated with lies, manufactured "evidence", forgeries, HUGH amounts of email abuse and spam (including extortion attempts), AND some are associated with terroristic threats to people in email. Other illegal behaviors (off Usenet) are associated with this group of people. PLEASE HELP ME PUBLICIZE THIS INFORMATION. |
All times are GMT -4. The time now is 10:40 AM. |
© 2024 MH Sub I, LLC dba Internet Brands