Grand Cherokee - headlight assembly removal
We have a 2001 Grand Cherokee Laredo
and can't get the headlight assembly to pull out - http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM I've removed the long 7mm hex screw, and have tried and tried - but can't get a grip to pull - Any suggestions on how to get this monster headlight assembly to pull out from the 3 ball sockets ? How the hell do the service people do it ? |
Re: Grand Cherokee - headlight assembly removal
They rock and pull it a little harder with the aid of pry bars like
a cloth covered screwdriver, or paint scraper. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Phil Schuman wrote: > > We have a 2001 Grand Cherokee Laredo > and can't get the headlight assembly to pull out - > > http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM > > I've removed the long 7mm hex screw, > and have tried and tried - but can't get a grip to pull - > > Any suggestions on how to get this monster headlight assembly > to pull out from the 3 ball sockets ? > How the hell do the service people do it ? |
Re: Grand Cherokee - headlight assembly removal
They rock and pull it a little harder with the aid of pry bars like
a cloth covered screwdriver, or paint scraper. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Phil Schuman wrote: > > We have a 2001 Grand Cherokee Laredo > and can't get the headlight assembly to pull out - > > http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM > > I've removed the long 7mm hex screw, > and have tried and tried - but can't get a grip to pull - > > Any suggestions on how to get this monster headlight assembly > to pull out from the 3 ball sockets ? > How the hell do the service people do it ? |
Re: Grand Cherokee - headlight assembly removal
They rock and pull it a little harder with the aid of pry bars like
a cloth covered screwdriver, or paint scraper. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Phil Schuman wrote: > > We have a 2001 Grand Cherokee Laredo > and can't get the headlight assembly to pull out - > > http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM > > I've removed the long 7mm hex screw, > and have tried and tried - but can't get a grip to pull - > > Any suggestions on how to get this monster headlight assembly > to pull out from the 3 ball sockets ? > How the hell do the service people do it ? |
Re: Grand Cherokee - headlight assembly removal
They rock and pull it a little harder with the aid of pry bars like
a cloth covered screwdriver, or paint scraper. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ Phil Schuman wrote: > > We have a 2001 Grand Cherokee Laredo > and can't get the headlight assembly to pull out - > > http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM > > I've removed the long 7mm hex screw, > and have tried and tried - but can't get a grip to pull - > > Any suggestions on how to get this monster headlight assembly > to pull out from the 3 ball sockets ? > How the hell do the service people do it ? |
Re: Grand Cherokee 2001 - headlight assembly removal
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:42558FC4.D59AF70A@cox.net... > They rock and pull it a little harder with the aid of pry bars like > a cloth covered screwdriver, or paint scraper. > God Bless America, ßill O|||||||O tnx - I used a long weed pry tool - and it finally worked. 2 of the 3 ball sockets released ok - The one in the middle bottom actually took the entire socket out :) I snapped it back in before replacing the assembly. Also - on the wiring harness there was a nittle "nib" that seemed to fit on a plastic pin at the bottom near the ball, so I pushed it back onto that pin before shoving the assembly.... tnx again for the help - Phil - |
Re: Grand Cherokee 2001 - headlight assembly removal
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:42558FC4.D59AF70A@cox.net... > They rock and pull it a little harder with the aid of pry bars like > a cloth covered screwdriver, or paint scraper. > God Bless America, ßill O|||||||O tnx - I used a long weed pry tool - and it finally worked. 2 of the 3 ball sockets released ok - The one in the middle bottom actually took the entire socket out :) I snapped it back in before replacing the assembly. Also - on the wiring harness there was a nittle "nib" that seemed to fit on a plastic pin at the bottom near the ball, so I pushed it back onto that pin before shoving the assembly.... tnx again for the help - Phil - |
Re: Grand Cherokee 2001 - headlight assembly removal
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:42558FC4.D59AF70A@cox.net... > They rock and pull it a little harder with the aid of pry bars like > a cloth covered screwdriver, or paint scraper. > God Bless America, ßill O|||||||O tnx - I used a long weed pry tool - and it finally worked. 2 of the 3 ball sockets released ok - The one in the middle bottom actually took the entire socket out :) I snapped it back in before replacing the assembly. Also - on the wiring harness there was a nittle "nib" that seemed to fit on a plastic pin at the bottom near the ball, so I pushed it back onto that pin before shoving the assembly.... tnx again for the help - Phil - |
Re: Grand Cherokee 2001 - headlight assembly removal
"L.W. (ßill) ------ III" <----------@cox.net> wrote in message news:42558FC4.D59AF70A@cox.net... > They rock and pull it a little harder with the aid of pry bars like > a cloth covered screwdriver, or paint scraper. > God Bless America, ßill O|||||||O tnx - I used a long weed pry tool - and it finally worked. 2 of the 3 ball sockets released ok - The one in the middle bottom actually took the entire socket out :) I snapped it back in before replacing the assembly. Also - on the wiring harness there was a nittle "nib" that seemed to fit on a plastic pin at the bottom near the ball, so I pushed it back onto that pin before shoving the assembly.... tnx again for the help - Phil - |
Re: Grand Cherokee - headlight assembly removal
You da mon!!!
How the hell do you know all this stuff? Do you have a brother who works on Japanaese cars? "L.W. ("ßill") ------ III" <----------@cox.net> wrote in message news:42558FC4.D59AF70A@cox.net... > They rock and pull it a little harder with the aid of pry bars like > a cloth covered screwdriver, or paint scraper. > God Bless America, ßill O|||||||O > mailto:-------------------- http://www.----------.com/ > > Phil Schuman wrote: >> >> We have a 2001 Grand Cherokee Laredo >> and can't get the headlight assembly to pull out - >> >> http://www.wjjeeps.com/lamps/lampsrem.htm#EXTERIORREM >> >> I've removed the long 7mm hex screw, >> and have tried and tried - but can't get a grip to pull - >> >> Any suggestions on how to get this monster headlight assembly >> to pull out from the 3 ball sockets ? >> How the hell do the service people do it ? |
All times are GMT -4. The time now is 09:58 AM. |
© 2024 MH Sub I, LLC dba Internet Brands