|
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's MUDLUVR wrote: > > Does anyone have an idea of what the gear ratio is for a stock amc 20 out of > an 86 CJ7? |
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's MUDLUVR wrote: > > Does anyone have an idea of what the gear ratio is for a stock amc 20 out of > an 86 CJ7? |
Re: gear ration
My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if
that makes any difference. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's MUDLUVR wrote: > > Does anyone have an idea of what the gear ratio is for a stock amc 20 out of > an 86 CJ7? |
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following: >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if >that makes any difference. > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's > >MUDLUVR wrote: >> >> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of >> an 86 CJ7? http://www.jeeptech.com/axle/amc20.html If you have the Dana 30 front differential, then: Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and from '80-'86 were 2.73 So it sounds like chances are you have 2.73 in your Dana 30 front end, so 2.73 in your amc20 rear end. I think you can look on the front end if it's a Dana 30 and try to find the tag that gives the axle ratio, but if all else fails then do this: http://www.jeeptech.com/AxleGeneral.html#ratio That jeeptech.com seems to be a GREAT reference! -- Travis http://jeepadventures.dyndns.org/jeep.html The meek shall inherit the earth. After I'm finished with it. :wq! |
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following: >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if >that makes any difference. > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's > >MUDLUVR wrote: >> >> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of >> an 86 CJ7? http://www.jeeptech.com/axle/amc20.html If you have the Dana 30 front differential, then: Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and from '80-'86 were 2.73 So it sounds like chances are you have 2.73 in your Dana 30 front end, so 2.73 in your amc20 rear end. I think you can look on the front end if it's a Dana 30 and try to find the tag that gives the axle ratio, but if all else fails then do this: http://www.jeeptech.com/AxleGeneral.html#ratio That jeeptech.com seems to be a GREAT reference! -- Travis http://jeepadventures.dyndns.org/jeep.html The meek shall inherit the earth. After I'm finished with it. :wq! |
Re: gear ration
On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain
<romainm@sympatico.ca> shared the following: >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if >that makes any difference. > >Mike >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >88 Cherokee 235 BFG AT's > >MUDLUVR wrote: >> >> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of >> an 86 CJ7? http://www.jeeptech.com/axle/amc20.html If you have the Dana 30 front differential, then: Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and from '80-'86 were 2.73 So it sounds like chances are you have 2.73 in your Dana 30 front end, so 2.73 in your amc20 rear end. I think you can look on the front end if it's a Dana 30 and try to find the tag that gives the axle ratio, but if all else fails then do this: http://www.jeeptech.com/AxleGeneral.html#ratio That jeeptech.com seems to be a GREAT reference! -- Travis http://jeepadventures.dyndns.org/jeep.html The meek shall inherit the earth. After I'm finished with it. :wq! |
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply to Mike as your post is under. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > http://www.jeeptech.com/axle/amc20.html > > If you have the Dana 30 front differential, then: > Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and > from '80-'86 were 2.73 > > So it sounds like chances are you have 2.73 in your Dana 30 front end, > so 2.73 in your amc20 rear end. I think you can look on the front end > if it's a Dana 30 and try to find the tag that gives the axle ratio, > but if all else fails then do this: > > http://www.jeeptech.com/AxleGeneral.html#ratio > > That jeeptech.com seems to be a GREAT reference! > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply to Mike as your post is under. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > http://www.jeeptech.com/axle/amc20.html > > If you have the Dana 30 front differential, then: > Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and > from '80-'86 were 2.73 > > So it sounds like chances are you have 2.73 in your Dana 30 front end, > so 2.73 in your amc20 rear end. I think you can look on the front end > if it's a Dana 30 and try to find the tag that gives the axle ratio, > but if all else fails then do this: > > http://www.jeeptech.com/AxleGeneral.html#ratio > > That jeeptech.com seems to be a GREAT reference! > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
Re: gear ration
Jeep Tech is a great reference, and you'll see Mike's 3.31s listed
at: http://www.jeeptech.com/axle/d44.html If you were intending to reply to Mike as your post is under. God Bless America, ßill O|||||||O mailto:-------------------- http://www.----------.com/ travis wrote: > > http://www.jeeptech.com/axle/amc20.html > > If you have the Dana 30 front differential, then: > Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and > from '80-'86 were 2.73 > > So it sounds like chances are you have 2.73 in your Dana 30 front end, > so 2.73 in your amc20 rear end. I think you can look on the front end > if it's a Dana 30 and try to find the tag that gives the axle ratio, > but if all else fails then do this: > > http://www.jeeptech.com/AxleGeneral.html#ratio > > That jeeptech.com seems to be a GREAT reference! > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
Re: gear ration
Yes I do have the dana 30 in the front, it did have the 258 motor, currently
it has a 350 in it. I was trying to avoid having to remove the diff cover and do the math, but that seems to be the safest. Thanks for the help. "travis" <travist34removethis@hotmail.com> wrote in message news:0anqov82ubm4h02iqkisbis6atja8rop2h@4ax.com... > On Wed, 15 Oct 2003 10:19:48 -0400, Mike Romain > <romainm@sympatico.ca> shared the following: > > >My 86 with the T5 tranny has 3.31's, but I also have the Dana 44 rear if > >that makes any difference. > > > >Mike > >86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >88 Cherokee 235 BFG AT's > > > >MUDLUVR wrote: > >> > >> Does anyone have an idea of what the gear ratio is for a stock amc 20 out of > >> an 86 CJ7? > > http://www.jeeptech.com/axle/amc20.html > > If you have the Dana 30 front differential, then: > Common gear ratios from '72-'75 were 3.73, from '76-'79 were 3.54, and > from '80-'86 were 2.73 > > So it sounds like chances are you have 2.73 in your Dana 30 front end, > so 2.73 in your amc20 rear end. I think you can look on the front end > if it's a Dana 30 and try to find the tag that gives the axle ratio, > but if all else fails then do this: > > http://www.jeeptech.com/AxleGeneral.html#ratio > > That jeeptech.com seems to be a GREAT reference! > > > > -- > Travis > http://jeepadventures.dyndns.org/jeep.html > The meek shall inherit the earth. After I'm finished with it. > :wq! |
| All times are GMT -4. The time now is 07:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands