Fuel Injection Conversion
 

Just picked up an '87 Wrangler for a mere song. I'm going to change it over
to fuel injection, but don't remember where to buy the Holley projection
kit.

Any one with the link?

Or, anyone with a better idea for fuel injection than the Holley?

Spdloader

1987 Jeep Wrangler
4.2L, Poser, bone stock, but all new tub and fenders.

1997 Jeep Wrangler
2.5L Poser

Re: Fuel Injection Conversion
 

Mopar makes an FI kit that will set you back around $2k. Howell's will
run around $1200. I didn't even know Holley made a fuel injection kit
for the YJ.

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

Mopar makes an FI kit that will set you back around $2k. Howell's will
run around $1200. I didn't even know Holley made a fuel injection kit
for the YJ.

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

Mopar makes an FI kit that will set you back around $2k. Howell's will
run around $1200. I didn't even know Holley made a fuel injection kit
for the YJ.

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

Thanks, found this, too.

http://www.fourwheeler.com/techartic.../photo_01.html


The old Holley kit was called "YJ pro-jection". It may no longer be
available.

Spdloader



"Micah" <mgoodenbour@gmail.com> wrote in message
news:1161917400.827795.325380@h48g2000cwc.googlegr oups.com...
> Mopar makes an FI kit that will set you back around $2k. Howell's will
> run around $1200. I didn't even know Holley made a fuel injection kit
> for the YJ.
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>

Re: Fuel Injection Conversion
 

Thanks, found this, too.

http://www.fourwheeler.com/techartic.../photo_01.html


The old Holley kit was called "YJ pro-jection". It may no longer be
available.

Spdloader



"Micah" <mgoodenbour@gmail.com> wrote in message
news:1161917400.827795.325380@h48g2000cwc.googlegr oups.com...
> Mopar makes an FI kit that will set you back around $2k. Howell's will
> run around $1200. I didn't even know Holley made a fuel injection kit
> for the YJ.
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>

Re: Fuel Injection Conversion
 

Thanks, found this, too.

http://www.fourwheeler.com/techartic.../photo_01.html


The old Holley kit was called "YJ pro-jection". It may no longer be
available.

Spdloader



"Micah" <mgoodenbour@gmail.com> wrote in message
news:1161917400.827795.325380@h48g2000cwc.googlegr oups.com...
> Mopar makes an FI kit that will set you back around $2k. Howell's will
> run around $1200. I didn't even know Holley made a fuel injection kit
> for the YJ.
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>

Re: Fuel Injection Conversion
 

http://www.holley.com/502-20S.asp
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Spdloader wrote:
>
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

http://www.holley.com/502-20S.asp
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Spdloader wrote:
>
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

http://www.holley.com/502-20S.asp
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Spdloader wrote:
>
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser

Re: Fuel Injection Conversion
 

Well, I found that one too, but it says it's only for V-8 applications.
Spdloader

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:4541BBAB.48DB7D84@cox.net...
> http://www.holley.com/502-20S.asp
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Spdloader wrote:
>>
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

Well, I found that one too, but it says it's only for V-8 applications.
Spdloader

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:4541BBAB.48DB7D84@cox.net...
> http://www.holley.com/502-20S.asp
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Spdloader wrote:
>>
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

Well, I found that one too, but it says it's only for V-8 applications.
Spdloader

"L.W.(Bill) ------ III" <----------@cox.net> wrote in message
news:4541BBAB.48DB7D84@cox.net...
> http://www.holley.com/502-20S.asp
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> Spdloader wrote:
>>
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

Why?

Earle

"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:T6d0h.8374$337.3750@southeast.rr.com...
> Just picked up an '87 Wrangler for a mere song. I'm going to change it
over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Fuel Injection Conversion
 

Why?

Earle

"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:T6d0h.8374$337.3750@southeast.rr.com...
> Just picked up an '87 Wrangler for a mere song. I'm going to change it
over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Fuel Injection Conversion
 

Why?

Earle

"Spdloader" <askforit@nospam.triad.rr.com> wrote in message
news:T6d0h.8374$337.3750@southeast.rr.com...
> Just picked up an '87 Wrangler for a mere song. I'm going to change it
over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Fuel Injection Conversion
 

I thought it would be worth a call, in that it just showed they
still make them. This number was for a 670 CFM which you wouldn't need
until you were above 8,000 RPMs:
http://www.----------.com/temp/258cfm8000.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

Spdloader wrote:
>
> Well, I found that one too, but it says it's only for V-8 applications.
> Spdloader

Re: Fuel Injection Conversion
 

I thought it would be worth a call, in that it just showed they
still make them. This number was for a 670 CFM which you wouldn't need
until you were above 8,000 RPMs:
http://www.----------.com/temp/258cfm8000.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

Spdloader wrote:
>
> Well, I found that one too, but it says it's only for V-8 applications.
> Spdloader

Re: Fuel Injection Conversion
 

I thought it would be worth a call, in that it just showed they
still make them. This number was for a 670 CFM which you wouldn't need
until you were above 8,000 RPMs:
http://www.----------.com/temp/258cfm8000.jpg
God Bless America, Bill O|||||||O
mailto:--------------------

Spdloader wrote:
>
> Well, I found that one too, but it says it's only for V-8 applications.
> Spdloader

Re: Fuel Injection Conversion
 

What about finding a fuel injected parts Jeep and using those parts to
convert yours?

Jeff DeWitt

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>

Re: Fuel Injection Conversion
 

What about finding a fuel injected parts Jeep and using those parts to
convert yours?

Jeff DeWitt

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>

Re: Fuel Injection Conversion
 

What about finding a fuel injected parts Jeep and using those parts to
convert yours?

Jeff DeWitt

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.
>
> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?
>
> Spdloader
>
> 1987 Jeep Wrangler
> 4.2L, Poser, bone stock, but all new tub and fenders.
>
> 1997 Jeep Wrangler
> 2.5L Poser
>
>

Re: Fuel Injection Conversion
 

I don't really have a good reason Earle, just that I've always wanted to do
it.
Not sure why. Plus, it'll be winter soon and I'm needing a basement project.

Spdloader


"Earle Horton" <elangloburgues@usa.com> wrote in message
news:45422a75$0$12183$88260bb3@free.teranews.com.. .
> Why?
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:T6d0h.8374$337.3750@southeast.rr.com...
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Fuel Injection Conversion
 

I don't really have a good reason Earle, just that I've always wanted to do
it.
Not sure why. Plus, it'll be winter soon and I'm needing a basement project.

Spdloader


"Earle Horton" <elangloburgues@usa.com> wrote in message
news:45422a75$0$12183$88260bb3@free.teranews.com.. .
> Why?
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:T6d0h.8374$337.3750@southeast.rr.com...
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Fuel Injection Conversion
 

I don't really have a good reason Earle, just that I've always wanted to do
it.
Not sure why. Plus, it'll be winter soon and I'm needing a basement project.

Spdloader


"Earle Horton" <elangloburgues@usa.com> wrote in message
news:45422a75$0$12183$88260bb3@free.teranews.com.. .
> Why?
>
> Earle
>
> "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> news:T6d0h.8374$337.3750@southeast.rr.com...
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> over
>> to fuel injection, but don't remember where to buy the Holley projection
>> kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Fuel Injection Conversion
 

That's a good idea too.

Spdloader


"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:t8z0h.27$HD6.9@tornado.southeast.rr.com...
> What about finding a fuel injected parts Jeep and using those parts to
> convert yours?
>
> Jeff DeWitt
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

That's a good idea too.

Spdloader


"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:t8z0h.27$HD6.9@tornado.southeast.rr.com...
> What about finding a fuel injected parts Jeep and using those parts to
> convert yours?
>
> Jeff DeWitt
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

That's a good idea too.

Spdloader


"Jeffrey DeWitt" <JeffDeWitt@nc.rr.com> wrote in message
news:t8z0h.27$HD6.9@tornado.southeast.rr.com...
> What about finding a fuel injected parts Jeep and using those parts to
> convert yours?
>
> Jeff DeWitt
>
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>>
>> Spdloader
>>
>> 1987 Jeep Wrangler
>> 4.2L, Poser, bone stock, but all new tub and fenders.
>>
>> 1997 Jeep Wrangler
>> 2.5L Poser

Re: Fuel Injection Conversion
 

I'm really not the one to comment on US suppliers, but try Summit Racing.
I've been happy with their service, but they may not be the cheapest.

Didn't see a version for the 258, but they sell one version for AMC engines
at 851.95 bucks, so I suspect they could get it for you.
http://store.summitracing.com/partde...5&autoview=sku

Looks a whole lot cheaper than the Mopar version at 2500 bucks !

Dave Milne, Scotland

> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> > news:T6d0h.8374$337.3750@southeast.rr.com...
> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> > over
> >> to fuel injection, but don't remember where to buy the Holley
projection
> >> kit.
> >>
> >> Any one with the link?
> >>
> >> Or, anyone with a better idea for fuel injection than the Holley?

Re: Fuel Injection Conversion
 

I'm really not the one to comment on US suppliers, but try Summit Racing.
I've been happy with their service, but they may not be the cheapest.

Didn't see a version for the 258, but they sell one version for AMC engines
at 851.95 bucks, so I suspect they could get it for you.
http://store.summitracing.com/partde...5&autoview=sku

Looks a whole lot cheaper than the Mopar version at 2500 bucks !

Dave Milne, Scotland

> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> > news:T6d0h.8374$337.3750@southeast.rr.com...
> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> > over
> >> to fuel injection, but don't remember where to buy the Holley
projection
> >> kit.
> >>
> >> Any one with the link?
> >>
> >> Or, anyone with a better idea for fuel injection than the Holley?

Re: Fuel Injection Conversion
 

I'm really not the one to comment on US suppliers, but try Summit Racing.
I've been happy with their service, but they may not be the cheapest.

Didn't see a version for the 258, but they sell one version for AMC engines
at 851.95 bucks, so I suspect they could get it for you.
http://store.summitracing.com/partde...5&autoview=sku

Looks a whole lot cheaper than the Mopar version at 2500 bucks !

Dave Milne, Scotland

> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
> > news:T6d0h.8374$337.3750@southeast.rr.com...
> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
> > over
> >> to fuel injection, but don't remember where to buy the Holley
projection
> >> kit.
> >>
> >> Any one with the link?
> >>
> >> Or, anyone with a better idea for fuel injection than the Holley?

Re: Fuel Injection Conversion
 

Thanks Dave!

Spdloader


"Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
news:QJR0h.43258$r61.17587@text.news.blueyonder.co .uk...
> I'm really not the one to comment on US suppliers, but try Summit Racing.
> I've been happy with their service, but they may not be the cheapest.
>
> Didn't see a version for the 258, but they sell one version for AMC
> engines
> at 851.95 bucks, so I suspect they could get it for you.
> http://store.summitracing.com/partde...5&autoview=sku
>
> Looks a whole lot cheaper than the Mopar version at 2500 bucks !
>
> Dave Milne, Scotland
>
>> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
>> > news:T6d0h.8374$337.3750@southeast.rr.com...
>> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> > over
>> >> to fuel injection, but don't remember where to buy the Holley
> projection
>> >> kit.
>> >>
>> >> Any one with the link?
>> >>
>> >> Or, anyone with a better idea for fuel injection than the Holley?
>
>

Re: Fuel Injection Conversion
 

Thanks Dave!

Spdloader


"Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
news:QJR0h.43258$r61.17587@text.news.blueyonder.co .uk...
> I'm really not the one to comment on US suppliers, but try Summit Racing.
> I've been happy with their service, but they may not be the cheapest.
>
> Didn't see a version for the 258, but they sell one version for AMC
> engines
> at 851.95 bucks, so I suspect they could get it for you.
> http://store.summitracing.com/partde...5&autoview=sku
>
> Looks a whole lot cheaper than the Mopar version at 2500 bucks !
>
> Dave Milne, Scotland
>
>> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
>> > news:T6d0h.8374$337.3750@southeast.rr.com...
>> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> > over
>> >> to fuel injection, but don't remember where to buy the Holley
> projection
>> >> kit.
>> >>
>> >> Any one with the link?
>> >>
>> >> Or, anyone with a better idea for fuel injection than the Holley?
>
>

Re: Fuel Injection Conversion
 

Thanks Dave!

Spdloader


"Dave Milne" <jeep@_removethisbit_milne.info> wrote in message
news:QJR0h.43258$r61.17587@text.news.blueyonder.co .uk...
> I'm really not the one to comment on US suppliers, but try Summit Racing.
> I've been happy with their service, but they may not be the cheapest.
>
> Didn't see a version for the 258, but they sell one version for AMC
> engines
> at 851.95 bucks, so I suspect they could get it for you.
> http://store.summitracing.com/partde...5&autoview=sku
>
> Looks a whole lot cheaper than the Mopar version at 2500 bucks !
>
> Dave Milne, Scotland
>
>> > "Spdloader" <askforit@nospam.triad.rr.com> wrote in message
>> > news:T6d0h.8374$337.3750@southeast.rr.com...
>> >> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> > over
>> >> to fuel injection, but don't remember where to buy the Holley
> projection
>> >> kit.
>> >>
>> >> Any one with the link?
>> >>
>> >> Or, anyone with a better idea for fuel injection than the Holley?
>
>

Re: Fuel Injection Conversion
 

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.

They're on ebay regularly for usually about half the price of a new one.

> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?

Speaking as someone with an 88 YJ with 258 that has a 4.0 head
conversion, Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up
lifters. 4.0 header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection,
TFI ignition upgrade, Crane double roller timing set... That is sitting
on a block with great oil pressure, round cylinders/walls and good hone
marks with normal compression.

I would estimate that these mods all netted me at most 35 horse power,
most of it down low off idle which is nice but means it's still a pig on
the highway it just doesn't compare to the better breathing 4.0 which
has just as much if not more low off idle torque than the 4.2 but also
revs past 3500 RPM's willingly and more importantly very quickly. My YJ
is still not as powerful at ANY RPM as my stock 4.0, and it's a world
apart from my 4.6 stroked XJ not even half as powerfull if even that.

For the price of a new Pro-Jection kit you can easilly get a running XJ
as a donner, a whole drive train could cost LESS than a used Pro-jection
2d system, which sell for $450 $500 bucks regularly on Ebay. In contrast
I just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
flywheel, bellhousing, computer and cables sell for $41 dollars.

Best part is, you're only a winter project away from a 4.6 stroker Using
the old 4.2 as a donner for the crank and rods... It's basically
worthless for anything else anyway as no one pays anything for them.
Generally they aren't even worth the cost of shipping them.

Actually maybe the best part is you get rid of that French transmission
and you can use anything from a solid AX15, an NV3550 or a current 6
speed. Which were all mated to the 4.0 in Wranglers and are thus easy swaps.

This isn't the same animal as putting a 350 in it, there's no motor
mounts to weld, no trans mounts or adapters, no new T-case to deal with.
drive shafts aren't an issue Basically it's all bolt in, minor fab or
available off a later YJ (92 to 95) or TJ...

--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Re: Fuel Injection Conversion
 

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.

They're on ebay regularly for usually about half the price of a new one.

> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?

Speaking as someone with an 88 YJ with 258 that has a 4.0 head
conversion, Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up
lifters. 4.0 header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection,
TFI ignition upgrade, Crane double roller timing set... That is sitting
on a block with great oil pressure, round cylinders/walls and good hone
marks with normal compression.

I would estimate that these mods all netted me at most 35 horse power,
most of it down low off idle which is nice but means it's still a pig on
the highway it just doesn't compare to the better breathing 4.0 which
has just as much if not more low off idle torque than the 4.2 but also
revs past 3500 RPM's willingly and more importantly very quickly. My YJ
is still not as powerful at ANY RPM as my stock 4.0, and it's a world
apart from my 4.6 stroked XJ not even half as powerfull if even that.

For the price of a new Pro-Jection kit you can easilly get a running XJ
as a donner, a whole drive train could cost LESS than a used Pro-jection
2d system, which sell for $450 $500 bucks regularly on Ebay. In contrast
I just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
flywheel, bellhousing, computer and cables sell for $41 dollars.

Best part is, you're only a winter project away from a 4.6 stroker Using
the old 4.2 as a donner for the crank and rods... It's basically
worthless for anything else anyway as no one pays anything for them.
Generally they aren't even worth the cost of shipping them.

Actually maybe the best part is you get rid of that French transmission
and you can use anything from a solid AX15, an NV3550 or a current 6
speed. Which were all mated to the 4.0 in Wranglers and are thus easy swaps.

This isn't the same animal as putting a 350 in it, there's no motor
mounts to weld, no trans mounts or adapters, no new T-case to deal with.
drive shafts aren't an issue Basically it's all bolt in, minor fab or
available off a later YJ (92 to 95) or TJ...

--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Re: Fuel Injection Conversion
 

Spdloader wrote:
> Just picked up an '87 Wrangler for a mere song. I'm going to change it over
> to fuel injection, but don't remember where to buy the Holley projection
> kit.

They're on ebay regularly for usually about half the price of a new one.

> Any one with the link?
>
> Or, anyone with a better idea for fuel injection than the Holley?

Speaking as someone with an 88 YJ with 258 that has a 4.0 head
conversion, Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up
lifters. 4.0 header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection,
TFI ignition upgrade, Crane double roller timing set... That is sitting
on a block with great oil pressure, round cylinders/walls and good hone
marks with normal compression.

I would estimate that these mods all netted me at most 35 horse power,
most of it down low off idle which is nice but means it's still a pig on
the highway it just doesn't compare to the better breathing 4.0 which
has just as much if not more low off idle torque than the 4.2 but also
revs past 3500 RPM's willingly and more importantly very quickly. My YJ
is still not as powerful at ANY RPM as my stock 4.0, and it's a world
apart from my 4.6 stroked XJ not even half as powerfull if even that.

For the price of a new Pro-Jection kit you can easilly get a running XJ
as a donner, a whole drive train could cost LESS than a used Pro-jection
2d system, which sell for $450 $500 bucks regularly on Ebay. In contrast
I just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
flywheel, bellhousing, computer and cables sell for $41 dollars.

Best part is, you're only a winter project away from a 4.6 stroker Using
the old 4.2 as a donner for the crank and rods... It's basically
worthless for anything else anyway as no one pays anything for them.
Generally they aren't even worth the cost of shipping them.

Actually maybe the best part is you get rid of that French transmission
and you can use anything from a solid AX15, an NV3550 or a current 6
speed. Which were all mated to the 4.0 in Wranglers and are thus easy swaps.

This isn't the same animal as putting a 350 in it, there's no motor
mounts to weld, no trans mounts or adapters, no new T-case to deal with.
drive shafts aren't an issue Basically it's all bolt in, minor fab or
available off a later YJ (92 to 95) or TJ...

--
Simon
"I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Re: Fuel Injection Conversion
 

"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:QL-dnY1zyYggPdnYnZ2dnUVZ_tadnZ2d@rcn.net...
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>
> They're on ebay regularly for usually about half the price of a new one.
>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>
> Speaking as someone with an 88 YJ with 258 that has a 4.0 head conversion,
> Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up lifters. 4.0
> header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection, TFI ignition
> upgrade, Crane double roller timing set... That is sitting on a block with
> great oil pressure, round cylinders/walls and good hone marks with normal
> compression.
>
> I would estimate that these mods all netted me at most 35 horse power,
> most of it down low off idle which is nice but means it's still a pig on
> the highway it just doesn't compare to the better breathing 4.0 which has
> just as much if not more low off idle torque than the 4.2 but also revs
> past 3500 RPM's willingly and more importantly very quickly. My YJ is
> still not as powerful at ANY RPM as my stock 4.0, and it's a world apart
> from my 4.6 stroked XJ not even half as powerfull if even that.
>
> For the price of a new Pro-Jection kit you can easilly get a running XJ as
> a donner, a whole drive train could cost LESS than a used Pro-jection 2d
> system, which sell for $450 $500 bucks regularly on Ebay. In contrast I
> just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
> flywheel, bellhousing, computer and cables sell for $41 dollars.
>
> Best part is, you're only a winter project away from a 4.6 stroker Using
> the old 4.2 as a donner for the crank and rods... It's basically worthless
> for anything else anyway as no one pays anything for them. Generally they
> aren't even worth the cost of shipping them.
>
> Actually maybe the best part is you get rid of that French transmission
> and you can use anything from a solid AX15, an NV3550 or a current 6
> speed. Which were all mated to the 4.0 in Wranglers and are thus easy
> swaps.
>
> This isn't the same animal as putting a 350 in it, there's no motor mounts
> to weld, no trans mounts or adapters, no new T-case to deal with. drive
> shafts aren't an issue Basically it's all bolt in, minor fab or available
> off a later YJ (92 to 95) or TJ...
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Thanks, great post!

Spdloader

Re: Fuel Injection Conversion
 

"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:QL-dnY1zyYggPdnYnZ2dnUVZ_tadnZ2d@rcn.net...
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>
> They're on ebay regularly for usually about half the price of a new one.
>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>
> Speaking as someone with an 88 YJ with 258 that has a 4.0 head conversion,
> Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up lifters. 4.0
> header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection, TFI ignition
> upgrade, Crane double roller timing set... That is sitting on a block with
> great oil pressure, round cylinders/walls and good hone marks with normal
> compression.
>
> I would estimate that these mods all netted me at most 35 horse power,
> most of it down low off idle which is nice but means it's still a pig on
> the highway it just doesn't compare to the better breathing 4.0 which has
> just as much if not more low off idle torque than the 4.2 but also revs
> past 3500 RPM's willingly and more importantly very quickly. My YJ is
> still not as powerful at ANY RPM as my stock 4.0, and it's a world apart
> from my 4.6 stroked XJ not even half as powerfull if even that.
>
> For the price of a new Pro-Jection kit you can easilly get a running XJ as
> a donner, a whole drive train could cost LESS than a used Pro-jection 2d
> system, which sell for $450 $500 bucks regularly on Ebay. In contrast I
> just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
> flywheel, bellhousing, computer and cables sell for $41 dollars.
>
> Best part is, you're only a winter project away from a 4.6 stroker Using
> the old 4.2 as a donner for the crank and rods... It's basically worthless
> for anything else anyway as no one pays anything for them. Generally they
> aren't even worth the cost of shipping them.
>
> Actually maybe the best part is you get rid of that French transmission
> and you can use anything from a solid AX15, an NV3550 or a current 6
> speed. Which were all mated to the 4.0 in Wranglers and are thus easy
> swaps.
>
> This isn't the same animal as putting a 350 in it, there's no motor mounts
> to weld, no trans mounts or adapters, no new T-case to deal with. drive
> shafts aren't an issue Basically it's all bolt in, minor fab or available
> off a later YJ (92 to 95) or TJ...
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Thanks, great post!

Spdloader

Re: Fuel Injection Conversion
 

"Simon Juncal" <SPAMERSSUCK@usefirstinitialandlastnameATerols.com > wrote in
message news:QL-dnY1zyYggPdnYnZ2dnUVZ_tadnZ2d@rcn.net...
> Spdloader wrote:
>> Just picked up an '87 Wrangler for a mere song. I'm going to change it
>> over to fuel injection, but don't remember where to buy the Holley
>> projection kit.
>
> They're on ebay regularly for usually about half the price of a new one.
>
>> Any one with the link?
>>
>> Or, anyone with a better idea for fuel injection than the Holley?
>
> Speaking as someone with an 88 YJ with 258 that has a 4.0 head conversion,
> Cold air intake, Hesco RVOB06 Cam, Comp Cams Anti-Pump up lifters. 4.0
> header, mandrel bent 2.5 /w Flowmaster, Holley Pro-Jection, TFI ignition
> upgrade, Crane double roller timing set... That is sitting on a block with
> great oil pressure, round cylinders/walls and good hone marks with normal
> compression.
>
> I would estimate that these mods all netted me at most 35 horse power,
> most of it down low off idle which is nice but means it's still a pig on
> the highway it just doesn't compare to the better breathing 4.0 which has
> just as much if not more low off idle torque than the 4.2 but also revs
> past 3500 RPM's willingly and more importantly very quickly. My YJ is
> still not as powerful at ANY RPM as my stock 4.0, and it's a world apart
> from my 4.6 stroked XJ not even half as powerfull if even that.
>
> For the price of a new Pro-Jection kit you can easilly get a running XJ as
> a donner, a whole drive train could cost LESS than a used Pro-jection 2d
> system, which sell for $450 $500 bucks regularly on Ebay. In contrast I
> just watched a decent AW4 (4.0 auto transmission from an XJ) with TC,
> flywheel, bellhousing, computer and cables sell for $41 dollars.
>
> Best part is, you're only a winter project away from a 4.6 stroker Using
> the old 4.2 as a donner for the crank and rods... It's basically worthless
> for anything else anyway as no one pays anything for them. Generally they
> aren't even worth the cost of shipping them.
>
> Actually maybe the best part is you get rid of that French transmission
> and you can use anything from a solid AX15, an NV3550 or a current 6
> speed. Which were all mated to the 4.0 in Wranglers and are thus easy
> swaps.
>
> This isn't the same animal as putting a 350 in it, there's no motor mounts
> to weld, no trans mounts or adapters, no new T-case to deal with. drive
> shafts aren't an issue Basically it's all bolt in, minor fab or available
> off a later YJ (92 to 95) or TJ...
>
> --
> Simon
> "I may be wrong, but I'm not uncertain." -- Robert A. Heinlein

Thanks, great post!

Spdloader