front disc rotor's
Hi Iam a first time jeep owner and would like to know, how hard is it to
relace the front brake rotor's on a 1999 jeep tj? Thank you |
Re: front disc rotor's
Unbolt the caliper, and the rotor slides off the lug studs:
http://www.----------.com/Dana30WheelBearing/index.htm God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "dave" <pathfinder@hotmail.com> wrote in message news:whH5i.59536$V75.21385@edtnps89... > Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you -- Posted via a free Usenet account from http://www.teranews.com |
Re: front disc rotor's
Unbolt the caliper, and the rotor slides off the lug studs:
http://www.----------.com/Dana30WheelBearing/index.htm God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "dave" <pathfinder@hotmail.com> wrote in message news:whH5i.59536$V75.21385@edtnps89... > Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you -- Posted via a free Usenet account from http://www.teranews.com |
Re: front disc rotor's
Unbolt the caliper, and the rotor slides off the lug studs:
http://www.----------.com/Dana30WheelBearing/index.htm God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "dave" <pathfinder@hotmail.com> wrote in message news:whH5i.59536$V75.21385@edtnps89... > Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you -- Posted via a free Usenet account from http://www.teranews.com |
Re: front disc rotor's
Unbolt the caliper, and the rotor slides off the lug studs:
http://www.----------.com/Dana30WheelBearing/index.htm God Bless America, Bill O|||||||O mailto:-------------------- http://www.----------.com/ "dave" <pathfinder@hotmail.com> wrote in message news:whH5i.59536$V75.21385@edtnps89... > Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you -- Posted via a free Usenet account from http://www.teranews.com |
Re: front disc rotor's
"L.W. \(Bill\) ------ III" <----------@cox.net> wrote in news:46574157$0
$10194$88260bb3@free.teranews.com: > Unbolt the caliper, and the rotor slides off the lug studs: > http://www.----------.com/Dana30WheelBearing/index.htm > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > > "dave" <pathfinder@hotmail.com> wrote in message > news:whH5i.59536$V75.21385@edtnps89... >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > > THank you The photo's on the web sit helps a lot. |
Re: front disc rotor's
"L.W. \(Bill\) ------ III" <----------@cox.net> wrote in news:46574157$0
$10194$88260bb3@free.teranews.com: > Unbolt the caliper, and the rotor slides off the lug studs: > http://www.----------.com/Dana30WheelBearing/index.htm > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > > "dave" <pathfinder@hotmail.com> wrote in message > news:whH5i.59536$V75.21385@edtnps89... >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > > THank you The photo's on the web sit helps a lot. |
Re: front disc rotor's
"L.W. \(Bill\) ------ III" <----------@cox.net> wrote in news:46574157$0
$10194$88260bb3@free.teranews.com: > Unbolt the caliper, and the rotor slides off the lug studs: > http://www.----------.com/Dana30WheelBearing/index.htm > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > > "dave" <pathfinder@hotmail.com> wrote in message > news:whH5i.59536$V75.21385@edtnps89... >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > > THank you The photo's on the web sit helps a lot. |
Re: front disc rotor's
"L.W. \(Bill\) ------ III" <----------@cox.net> wrote in news:46574157$0
$10194$88260bb3@free.teranews.com: > Unbolt the caliper, and the rotor slides off the lug studs: > http://www.----------.com/Dana30WheelBearing/index.htm > God Bless America, Bill O|||||||O > mailto:-------------------- http://www.----------.com/ > > > "dave" <pathfinder@hotmail.com> wrote in message > news:whH5i.59536$V75.21385@edtnps89... >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > > THank you The photo's on the web sit helps a lot. |
Re: front disc rotor's
On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I had to use a heavy hammer to remove my rotors; the rotors did not budge with a rubber mallet. The rotors were rusted on the inside and stuck to the bearing assembly. As someone has mentioned, when installing a new rotor, put some anti-sieze on the inside where it comes in contact with the bearing assembly. I did not do that; I saw the post later :( |
Re: front disc rotor's
On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I had to use a heavy hammer to remove my rotors; the rotors did not budge with a rubber mallet. The rotors were rusted on the inside and stuck to the bearing assembly. As someone has mentioned, when installing a new rotor, put some anti-sieze on the inside where it comes in contact with the bearing assembly. I did not do that; I saw the post later :( |
Re: front disc rotor's
On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I had to use a heavy hammer to remove my rotors; the rotors did not budge with a rubber mallet. The rotors were rusted on the inside and stuck to the bearing assembly. As someone has mentioned, when installing a new rotor, put some anti-sieze on the inside where it comes in contact with the bearing assembly. I did not do that; I saw the post later :( |
Re: front disc rotor's
On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I had to use a heavy hammer to remove my rotors; the rotors did not budge with a rubber mallet. The rotors were rusted on the inside and stuck to the bearing assembly. As someone has mentioned, when installing a new rotor, put some anti-sieze on the inside where it comes in contact with the bearing assembly. I did not do that; I saw the post later :( |
Re: front disc rotor's
stilllearning wrote:
> On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote: >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > I had to use a heavy hammer to remove my rotors; the rotors did not > budge with a rubber mallet. The rotors were rusted on the inside and > stuck to the bearing assembly. As someone has mentioned, when > installing a new rotor, put some anti-sieze on the inside where it > comes in contact with the bearing assembly. I did not do that; I saw > the post later :( > If you have aluminum rims, you also need anti-seize on the outside of the mating surface. The aluminum and steel can weld together from electrolysis. I have seen more than a few Jeeps rims destroyed this way. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: front disc rotor's
stilllearning wrote:
> On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote: >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > I had to use a heavy hammer to remove my rotors; the rotors did not > budge with a rubber mallet. The rotors were rusted on the inside and > stuck to the bearing assembly. As someone has mentioned, when > installing a new rotor, put some anti-sieze on the inside where it > comes in contact with the bearing assembly. I did not do that; I saw > the post later :( > If you have aluminum rims, you also need anti-seize on the outside of the mating surface. The aluminum and steel can weld together from electrolysis. I have seen more than a few Jeeps rims destroyed this way. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: front disc rotor's
stilllearning wrote:
> On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote: >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > I had to use a heavy hammer to remove my rotors; the rotors did not > budge with a rubber mallet. The rotors were rusted on the inside and > stuck to the bearing assembly. As someone has mentioned, when > installing a new rotor, put some anti-sieze on the inside where it > comes in contact with the bearing assembly. I did not do that; I saw > the post later :( > If you have aluminum rims, you also need anti-seize on the outside of the mating surface. The aluminum and steel can weld together from electrolysis. I have seen more than a few Jeeps rims destroyed this way. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: front disc rotor's
stilllearning wrote:
> On May 25, 4:02 pm, dave <pathfin...@hotmail.com> wrote: >> Hi Iam a first time jeep owner and would like to know, how hard is it to >> relace the front brake rotor's on a 1999 jeep tj? Thank you > > I had to use a heavy hammer to remove my rotors; the rotors did not > budge with a rubber mallet. The rotors were rusted on the inside and > stuck to the bearing assembly. As someone has mentioned, when > installing a new rotor, put some anti-sieze on the inside where it > comes in contact with the bearing assembly. I did not do that; I saw > the post later :( > If you have aluminum rims, you also need anti-seize on the outside of the mating surface. The aluminum and steel can weld together from electrolysis. I have seen more than a few Jeeps rims destroyed this way. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Canadian Off Road Trips Photos: Non members can still view! Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 (More Off Road album links at bottom of the view page) |
Re: front disc rotor's
dave wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I would not go back with Jeep's composite rotors. They almost always warp. tw -- PLEASE REMOVE THE "OBVIOUS" TO REPLY. |
Re: front disc rotor's
dave wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I would not go back with Jeep's composite rotors. They almost always warp. tw -- PLEASE REMOVE THE "OBVIOUS" TO REPLY. |
Re: front disc rotor's
dave wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I would not go back with Jeep's composite rotors. They almost always warp. tw -- PLEASE REMOVE THE "OBVIOUS" TO REPLY. |
Re: front disc rotor's
dave wrote:
> Hi Iam a first time jeep owner and would like to know, how hard is it to > relace the front brake rotor's on a 1999 jeep tj? Thank you I would not go back with Jeep's composite rotors. They almost always warp. tw -- PLEASE REMOVE THE "OBVIOUS" TO REPLY. |
Re: front disc rotor's
Dave, It's pretty easy. This site has a straightforward write-up, with pictures. http://www.4x4xplor.com/disc-brakes.html On Fri, 25 May 2007 20:02:36 GMT, dave <pathfinder@hotmail.com> wrote: >Hi Iam a first time jeep owner and would like to know, how hard is it to >relace the front brake rotor's on a 1999 jeep tj? Thank you |
Re: front disc rotor's
Dave, It's pretty easy. This site has a straightforward write-up, with pictures. http://www.4x4xplor.com/disc-brakes.html On Fri, 25 May 2007 20:02:36 GMT, dave <pathfinder@hotmail.com> wrote: >Hi Iam a first time jeep owner and would like to know, how hard is it to >relace the front brake rotor's on a 1999 jeep tj? Thank you |
Re: front disc rotor's
Dave, It's pretty easy. This site has a straightforward write-up, with pictures. http://www.4x4xplor.com/disc-brakes.html On Fri, 25 May 2007 20:02:36 GMT, dave <pathfinder@hotmail.com> wrote: >Hi Iam a first time jeep owner and would like to know, how hard is it to >relace the front brake rotor's on a 1999 jeep tj? Thank you |
Re: front disc rotor's
Dave, It's pretty easy. This site has a straightforward write-up, with pictures. http://www.4x4xplor.com/disc-brakes.html On Fri, 25 May 2007 20:02:36 GMT, dave <pathfinder@hotmail.com> wrote: >Hi Iam a first time jeep owner and would like to know, how hard is it to >relace the front brake rotor's on a 1999 jeep tj? Thank you |
All times are GMT -4. The time now is 08:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands