Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   Few lift questions for 98' TJ (https://www.jeepscanada.com/jeep-mailing-list-32/few-lift-questions-98-tj-33201/)

ryaweten@gmail.com 11-24-2005 03:37 AM

Few lift questions for 98' TJ
 
I have a 98' 4.0L TJ. I'm going to be getting a 4" skyjacker lift done
soon and can't decide whether to go with 33's or 35's. So far I am
getting the following:

4" Skyjacker single flex lift
6" Bushwacker fender flares
4.56 or 4.88 gears (depending on which size tires i get)
New clutch
Borla Cat-back kit.

I know the 33's would fit better... but I dont plan on rock climbing, I
just want a big truck. Will the 35's fit good for normal trailriding
and offroading? I don't do anything that requires a lot of flex.

I am looking for some cheap steel wheels... and i found this site
:www.tirepackage.com. They have a bunch of cheap 15x10 steel wheels,
but they all have 3.75"+ Backspacing. I know this makes the tire stick
out farther... but how much of a differrence does it actually make? I
want to go wide since i'm getting the 6" fender flares, and i believe
the law in NJ is that the tires can stick out about 2" past the fender.


What are some other good places or sites to get cheap steel wheels and
tires? This jeep is a daily driver so i'm thinking the 33's would be
the best bet. Can I fit a spare 33" tire on the stock spare tire rack?

I'm kinda new to all of this stuff so I'd appreciate any help you guys
can give me. Thanks!

-Ryan


Matt Macchiarolo 12-04-2005 12:01 PM

Re: Few lift questions for 98' TJ
 

<ryaweten@gmail.com> wrote in message
news:1132821424.311614.22470@o13g2000cwo.googlegro ups.com...
> I have a 98' 4.0L TJ. I'm going to be getting a 4" skyjacker lift done
> soon and can't decide whether to go with 33's or 35's. So far I am
> getting the following:
>
> 4" Skyjacker single flex lift
> 6" Bushwacker fender flares
> 4.56 or 4.88 gears (depending on which size tires i get)
> New clutch
> Borla Cat-back kit.
>
> I know the 33's would fit better... but I dont plan on rock climbing, I
> just want a big truck. Will the 35's fit good for normal trailriding
> and offroading? I don't do anything that requires a lot of flex.


You might need a 1" body lift to fit the 35's. Also if you have the Dana 35c
rear axle, you will need to upgrade the axle, 35's kill that axle pretty
quick. If you don't *need* the larger tires, save your money.

>
> I am looking for some cheap steel wheels... and i found this site
> :www.tirepackage.com. They have a bunch of cheap 15x10 steel wheels,
> but they all have 3.75"+ Backspacing. I know this makes the tire stick
> out farther... but how much of a differrence does it actually make? I
> want to go wide since i'm getting the 6" fender flares, and i believe
> the law in NJ is that the tires can stick out about 2" past the fender.
>

You'll want the shallower backspacing so your tires don't rub the front
control arms. You might also consider 8" rims, when aired down for
off-roading they will tend to be less susceptibe to losing a bead.

Also, in my opinion if your exhaust is shot from the cat back, go ahead and
get the Borla, but if your exhaust is OK don't bother.
>
> What are some other good places or sites to get cheap steel wheels and
> tires? This jeep is a daily driver so i'm thinking the 33's would be
> the best bet. Can I fit a spare 33" tire on the stock spare tire rack?


Yes, but it's not really designed to carry that weight, a swing-out tire
carrier is recommended.




Matt Macchiarolo 12-04-2005 12:01 PM

Re: Few lift questions for 98' TJ
 

<ryaweten@gmail.com> wrote in message
news:1132821424.311614.22470@o13g2000cwo.googlegro ups.com...
> I have a 98' 4.0L TJ. I'm going to be getting a 4" skyjacker lift done
> soon and can't decide whether to go with 33's or 35's. So far I am
> getting the following:
>
> 4" Skyjacker single flex lift
> 6" Bushwacker fender flares
> 4.56 or 4.88 gears (depending on which size tires i get)
> New clutch
> Borla Cat-back kit.
>
> I know the 33's would fit better... but I dont plan on rock climbing, I
> just want a big truck. Will the 35's fit good for normal trailriding
> and offroading? I don't do anything that requires a lot of flex.


You might need a 1" body lift to fit the 35's. Also if you have the Dana 35c
rear axle, you will need to upgrade the axle, 35's kill that axle pretty
quick. If you don't *need* the larger tires, save your money.

>
> I am looking for some cheap steel wheels... and i found this site
> :www.tirepackage.com. They have a bunch of cheap 15x10 steel wheels,
> but they all have 3.75"+ Backspacing. I know this makes the tire stick
> out farther... but how much of a differrence does it actually make? I
> want to go wide since i'm getting the 6" fender flares, and i believe
> the law in NJ is that the tires can stick out about 2" past the fender.
>

You'll want the shallower backspacing so your tires don't rub the front
control arms. You might also consider 8" rims, when aired down for
off-roading they will tend to be less susceptibe to losing a bead.

Also, in my opinion if your exhaust is shot from the cat back, go ahead and
get the Borla, but if your exhaust is OK don't bother.
>
> What are some other good places or sites to get cheap steel wheels and
> tires? This jeep is a daily driver so i'm thinking the 33's would be
> the best bet. Can I fit a spare 33" tire on the stock spare tire rack?


Yes, but it's not really designed to carry that weight, a swing-out tire
carrier is recommended.




Matt Macchiarolo 12-04-2005 12:01 PM

Re: Few lift questions for 98' TJ
 

<ryaweten@gmail.com> wrote in message
news:1132821424.311614.22470@o13g2000cwo.googlegro ups.com...
> I have a 98' 4.0L TJ. I'm going to be getting a 4" skyjacker lift done
> soon and can't decide whether to go with 33's or 35's. So far I am
> getting the following:
>
> 4" Skyjacker single flex lift
> 6" Bushwacker fender flares
> 4.56 or 4.88 gears (depending on which size tires i get)
> New clutch
> Borla Cat-back kit.
>
> I know the 33's would fit better... but I dont plan on rock climbing, I
> just want a big truck. Will the 35's fit good for normal trailriding
> and offroading? I don't do anything that requires a lot of flex.


You might need a 1" body lift to fit the 35's. Also if you have the Dana 35c
rear axle, you will need to upgrade the axle, 35's kill that axle pretty
quick. If you don't *need* the larger tires, save your money.

>
> I am looking for some cheap steel wheels... and i found this site
> :www.tirepackage.com. They have a bunch of cheap 15x10 steel wheels,
> but they all have 3.75"+ Backspacing. I know this makes the tire stick
> out farther... but how much of a differrence does it actually make? I
> want to go wide since i'm getting the 6" fender flares, and i believe
> the law in NJ is that the tires can stick out about 2" past the fender.
>

You'll want the shallower backspacing so your tires don't rub the front
control arms. You might also consider 8" rims, when aired down for
off-roading they will tend to be less susceptibe to losing a bead.

Also, in my opinion if your exhaust is shot from the cat back, go ahead and
get the Borla, but if your exhaust is OK don't bother.
>
> What are some other good places or sites to get cheap steel wheels and
> tires? This jeep is a daily driver so i'm thinking the 33's would be
> the best bet. Can I fit a spare 33" tire on the stock spare tire rack?


Yes, but it's not really designed to carry that weight, a swing-out tire
carrier is recommended.





All times are GMT -4. The time now is 03:03 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05574 seconds with 5 queries