Even MORE questions..
 

89 XJ 2" Skyjacker AAL lift continues..

OK, All four rear shock bolts came out w/o issue! SCORE! Got the passenger
side leaf spring off. The AAL is almost as long as the main leaf, so I
installed it under the main leaf with the three smaller stock leaves below
it.

Questions are..

The Third leaf in the pack (formerly the 2nd longest leaf) does not touch
the main leaf at the front spring eye bushing. There is about 1/4 inch of
clearance. I tried flipping the leaf around but then the leaf didn't sit
properly at all and still line up in the tie bolt hole. All the longer
portions of the leaves are toward the front spring bushing.

Three clamps wrapped around the stock leaf pack when I removed it. I had to
remove all thee clamps to put the ALL in. I had to basically completely
dissassemble the leaf pack. All the leaves are now lined up and the tie bolt
is in, at 27 ftlbs (I used two C-clamps to compress the leaves while
tightening the tie bolt). How do get the clamps back on? I could just wrap
them back around and bend the metal to fit, but one small "lock" tab on the
clamp all ready broke. I have them wrapped around the leaves for now, but
I'm not sure that is exactly safe. Where can I get new clamps?

Thanks..

Carl

Re: Even MORE questions..
 

Also finding it difficult to get the rear spring eye back into the stock
shackle.. suggestions appreciated..

Carl

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:420e8c74$1_2@newsfeed.slurp.net...
> 89 XJ 2" Skyjacker AAL lift continues..
>
> OK, All four rear shock bolts came out w/o issue! SCORE! Got the passenger
> side leaf spring off. The AAL is almost as long as the main leaf, so I
> installed it under the main leaf with the three smaller stock leaves below
> it.
>
> Questions are..
>
> The Third leaf in the pack (formerly the 2nd longest leaf) does not touch
> the main leaf at the front spring eye bushing. There is about 1/4 inch of
> clearance. I tried flipping the leaf around but then the leaf didn't sit
> properly at all and still line up in the tie bolt hole. All the longer
> portions of the leaves are toward the front spring bushing.
>
> Three clamps wrapped around the stock leaf pack when I removed it. I had
to
> remove all thee clamps to put the ALL in. I had to basically completely
> dissassemble the leaf pack. All the leaves are now lined up and the tie
bolt
> is in, at 27 ftlbs (I used two C-clamps to compress the leaves while
> tightening the tie bolt). How do get the clamps back on? I could just wrap
> them back around and bend the metal to fit, but one small "lock" tab on
the
> clamp all ready broke. I have them wrapped around the leaves for now, but
> I'm not sure that is exactly safe. Where can I get new clamps?
>
> Thanks..
>
> Carl
>
>

Re: Even MORE questions..
 

Also finding it difficult to get the rear spring eye back into the stock
shackle.. suggestions appreciated..

Carl

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:420e8c74$1_2@newsfeed.slurp.net...
> 89 XJ 2" Skyjacker AAL lift continues..
>
> OK, All four rear shock bolts came out w/o issue! SCORE! Got the passenger
> side leaf spring off. The AAL is almost as long as the main leaf, so I
> installed it under the main leaf with the three smaller stock leaves below
> it.
>
> Questions are..
>
> The Third leaf in the pack (formerly the 2nd longest leaf) does not touch
> the main leaf at the front spring eye bushing. There is about 1/4 inch of
> clearance. I tried flipping the leaf around but then the leaf didn't sit
> properly at all and still line up in the tie bolt hole. All the longer
> portions of the leaves are toward the front spring bushing.
>
> Three clamps wrapped around the stock leaf pack when I removed it. I had
to
> remove all thee clamps to put the ALL in. I had to basically completely
> dissassemble the leaf pack. All the leaves are now lined up and the tie
bolt
> is in, at 27 ftlbs (I used two C-clamps to compress the leaves while
> tightening the tie bolt). How do get the clamps back on? I could just wrap
> them back around and bend the metal to fit, but one small "lock" tab on
the
> clamp all ready broke. I have them wrapped around the leaves for now, but
> I'm not sure that is exactly safe. Where can I get new clamps?
>
> Thanks..
>
> Carl
>
>

Re: Even MORE questions..
 

Also finding it difficult to get the rear spring eye back into the stock
shackle.. suggestions appreciated..

Carl

"Carl Saiyed" <carlsaiyed@REMOVEhotmail.com> wrote in message
news:420e8c74$1_2@newsfeed.slurp.net...
> 89 XJ 2" Skyjacker AAL lift continues..
>
> OK, All four rear shock bolts came out w/o issue! SCORE! Got the passenger
> side leaf spring off. The AAL is almost as long as the main leaf, so I
> installed it under the main leaf with the three smaller stock leaves below
> it.
>
> Questions are..
>
> The Third leaf in the pack (formerly the 2nd longest leaf) does not touch
> the main leaf at the front spring eye bushing. There is about 1/4 inch of
> clearance. I tried flipping the leaf around but then the leaf didn't sit
> properly at all and still line up in the tie bolt hole. All the longer
> portions of the leaves are toward the front spring bushing.
>
> Three clamps wrapped around the stock leaf pack when I removed it. I had
to
> remove all thee clamps to put the ALL in. I had to basically completely
> dissassemble the leaf pack. All the leaves are now lined up and the tie
bolt
> is in, at 27 ftlbs (I used two C-clamps to compress the leaves while
> tightening the tie bolt). How do get the clamps back on? I could just wrap
> them back around and bend the metal to fit, but one small "lock" tab on
the
> clamp all ready broke. I have them wrapped around the leaves for now, but
> I'm not sure that is exactly safe. Where can I get new clamps?
>
> Thanks..
>
> Carl
>
>