Early CJ5 Body question
 

My 1964 CJ5 has a 1/2" -5/8" diameter x approx. 6" long sheet metal tube
attached vertically to the outside of each of the rear corners. These
appear to be original to the jeep.

Does anyone know what the intended use is for these?

Re: Early CJ5 Body question
 

A picture might help... I'm thinking for flags if it is sheet metal (not
strong enough to hang something off of). Do you know its history? Maybe it
was a parade vehicle for the Shiners or something.
-Brian

"Scott" <scottbwebb@bellsouth.net> wrote in message
news:eqRUa.3868$jI6.3464@fe05.atl2.webusenet.com.. .
: My 1964 CJ5 has a 1/2" -5/8" diameter x approx. 6" long sheet metal tube
: attached vertically to the outside of each of the rear corners. These
: appear to be original to the jeep.
:
: Does anyone know what the intended use is for these?
:
:
:

Re: Early CJ5 Body question
 

These were sockets for the factory soft top rear bows. Some jeeps had
them, some didn't. Not sure but I think the military versions used them
as well. Search around the net, I've seen sites detailing these things.


Scott (scottbwebb@bellsouth.net) wrote:
: My 1964 CJ5 has a 1/2" -5/8" diameter x approx. 6" long sheet metal tube
: attached vertically to the outside of each of the rear corners. These
: appear to be original to the jeep.

: Does anyone know what the intended use is for these?




--
Howard Eisenhauer on **************************************
* *
Chebucto Community Network * Can't think of anything cute *
Halifax Nova Scotia * to put in here *
* *
aa988@chebucto.ns.ca **************************************

Re: Early CJ5 Body question
 

Hi Scott,
Not on '64 Civilian Jeep, but someone may have added the bow mounts
used on older Jeeps, like: http://www.thecj2apage.com/pockets.html
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Scott wrote:
>
> My 1964 CJ5 has a 1/2" -5/8" diameter x approx. 6" long sheet metal tube
> attached vertically to the outside of each of the rear corners. These
> appear to be original to the jeep.
>
> Does anyone know what the intended use is for these?

Re: Early CJ5 Body question
 

Bow pockets for the original, factory soft-top.

"Scott" <scottbwebb@bellsouth.net> wrote in message
news:0ohVa.6126$jI6.1539@fe05.atl2.webusenet.com.. .
>
> "Scott" <scottbwebb@bellsouth.net> wrote in message
> news:eqRUa.3868$jI6.3464@fe05.atl2.webusenet.com.. .
> > My 1964 CJ5 has a 1/2" -5/8" diameter x approx. 6" long sheet metal tube
> > attached vertically to the outside of each of the rear corners. These
> > appear to be original to the jeep.
> >
> > Does anyone know what the intended use is for these?
> >
> >
> >
>
>
>