Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   Doodling Round Hay Bales with a Jeep (https://www.jeepscanada.com/jeep-mailing-list-32/doodling-round-hay-bales-jeep-23026/)

Jeepers 12-12-2004 01:38 PM

Re: Doodling Round Hay Bales with a Jeep
 
In article <vBZud.24265$4m5.6621@fe1.columbus.rr.com>,
"Denny" <wddodge@woh.rr.com> wrote:

> I use a JD 4010 with the bale forks on the 3 point. Seems to work good
> enough for me. Sometimes I'll roll them around with the bobcat if I don't
> have to move em far.
>
> Denny


Diesel or gas JD? Mine is 4020LP, hard to start these days.

I want a bobcat.

If my oil well comes in I'll remedy both situations. ;^)

--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

Jeepers 12-12-2004 01:38 PM

Re: Doodling Round Hay Bales with a Jeep
 
In article <vBZud.24265$4m5.6621@fe1.columbus.rr.com>,
"Denny" <wddodge@woh.rr.com> wrote:

> I use a JD 4010 with the bale forks on the 3 point. Seems to work good
> enough for me. Sometimes I'll roll them around with the bobcat if I don't
> have to move em far.
>
> Denny


Diesel or gas JD? Mine is 4020LP, hard to start these days.

I want a bobcat.

If my oil well comes in I'll remedy both situations. ;^)

--
Member AAAAAAAA
American Association Against Acronym Abuse And Also Ambiguity.

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 12-12-2004 03:02 PM

Re: Doodling Round Hay Bales with a Jeep
 
I would put the hay on a trailer and make a tripod hooked to your
roll bar and run a hay slinger of the Power Take Off:
http://www.apple.queensu.ca/CJ3B/Pho...ng1948CJ2A.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jcwelch@hal-pc.org wrote:
>
> Has anyone ever had a hay fork put on thier jeep, either front or back?
> Lots of people put snow plows on Jeeps, so it seems like a hydraulic
> fork would be a possible. Hopefully someone out there has already
> worked out the bugs.
>
> I need to be able to move round hay bales to feed the cows. My tractor
> is over the hill so I want to use one of my Jeeps. I have a 'tumble
> bug' that I can use to move bales one at a time.


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 12-12-2004 03:02 PM

Re: Doodling Round Hay Bales with a Jeep
 
I would put the hay on a trailer and make a tripod hooked to your
roll bar and run a hay slinger of the Power Take Off:
http://www.apple.queensu.ca/CJ3B/Pho...ng1948CJ2A.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jcwelch@hal-pc.org wrote:
>
> Has anyone ever had a hay fork put on thier jeep, either front or back?
> Lots of people put snow plows on Jeeps, so it seems like a hydraulic
> fork would be a possible. Hopefully someone out there has already
> worked out the bugs.
>
> I need to be able to move round hay bales to feed the cows. My tractor
> is over the hill so I want to use one of my Jeeps. I have a 'tumble
> bug' that I can use to move bales one at a time.


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 12-12-2004 03:02 PM

Re: Doodling Round Hay Bales with a Jeep
 
I would put the hay on a trailer and make a tripod hooked to your
roll bar and run a hay slinger of the Power Take Off:
http://www.apple.queensu.ca/CJ3B/Pho...ng1948CJ2A.JPG
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

jcwelch@hal-pc.org wrote:
>
> Has anyone ever had a hay fork put on thier jeep, either front or back?
> Lots of people put snow plows on Jeeps, so it seems like a hydraulic
> fork would be a possible. Hopefully someone out there has already
> worked out the bugs.
>
> I need to be able to move round hay bales to feed the cows. My tractor
> is over the hill so I want to use one of my Jeeps. I have a 'tumble
> bug' that I can use to move bales one at a time.


Denny 12-12-2004 05:20 PM

Re: Doodling Round Hay Bales with a Jeep
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-D7FF52.12384812122004@news-east.newsfeeds.com...
> In article <vBZud.24265$4m5.6621@fe1.columbus.rr.com>,
> "Denny" <wddodge@woh.rr.com> wrote:
>
>> I use a JD 4010 with the bale forks on the 3 point. Seems to work good
>> enough for me. Sometimes I'll roll them around with the bobcat if I don't
>> have to move em far.
>>
>> Denny

>
> Diesel or gas JD? Mine is 4020LP, hard to start these days.
>
> I want a bobcat.
>
> If my oil well comes in I'll remedy both situations. ;^)


Diesel. I'm in Ohio and gas is rare and I've only seen pictures of a lp
tractor.

A little bobcat is the best back saver to have around the barn that was ever
invented.... This one is thirty years old, little and the hydraulics are
getting slow but I swear it's my best friend.. <VBG>

Denny



Denny 12-12-2004 05:20 PM

Re: Doodling Round Hay Bales with a Jeep
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-D7FF52.12384812122004@news-east.newsfeeds.com...
> In article <vBZud.24265$4m5.6621@fe1.columbus.rr.com>,
> "Denny" <wddodge@woh.rr.com> wrote:
>
>> I use a JD 4010 with the bale forks on the 3 point. Seems to work good
>> enough for me. Sometimes I'll roll them around with the bobcat if I don't
>> have to move em far.
>>
>> Denny

>
> Diesel or gas JD? Mine is 4020LP, hard to start these days.
>
> I want a bobcat.
>
> If my oil well comes in I'll remedy both situations. ;^)


Diesel. I'm in Ohio and gas is rare and I've only seen pictures of a lp
tractor.

A little bobcat is the best back saver to have around the barn that was ever
invented.... This one is thirty years old, little and the hydraulics are
getting slow but I swear it's my best friend.. <VBG>

Denny



Denny 12-12-2004 05:20 PM

Re: Doodling Round Hay Bales with a Jeep
 

"Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message
news:moomesa-D7FF52.12384812122004@news-east.newsfeeds.com...
> In article <vBZud.24265$4m5.6621@fe1.columbus.rr.com>,
> "Denny" <wddodge@woh.rr.com> wrote:
>
>> I use a JD 4010 with the bale forks on the 3 point. Seems to work good
>> enough for me. Sometimes I'll roll them around with the bobcat if I don't
>> have to move em far.
>>
>> Denny

>
> Diesel or gas JD? Mine is 4020LP, hard to start these days.
>
> I want a bobcat.
>
> If my oil well comes in I'll remedy both situations. ;^)


Diesel. I'm in Ohio and gas is rare and I've only seen pictures of a lp
tractor.

A little bobcat is the best back saver to have around the barn that was ever
invented.... This one is thirty years old, little and the hydraulics are
getting slow but I swear it's my best friend.. <VBG>

Denny



DougW 12-12-2004 06:57 PM

Re: Doodling Round Hay Bales with a Jeep
 
Denny did pass the time by typing:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message


>> If my oil well comes in I'll remedy both situations. ;^)

>
> Diesel. I'm in Ohio and gas is rare and I've only seen pictures of a lp
> tractor.


google for "drip gas" :) My cubicle mate has an old Allice Chalmers
that his granpappy used to run off it.

--
DougW



DougW 12-12-2004 06:57 PM

Re: Doodling Round Hay Bales with a Jeep
 
Denny did pass the time by typing:
> "Jeepers" <moomesa@INVALIDfnbnet.net> wrote in message


>> If my oil well comes in I'll remedy both situations. ;^)

>
> Diesel. I'm in Ohio and gas is rare and I've only seen pictures of a lp
> tractor.


google for "drip gas" :) My cubicle mate has an old Allice Chalmers
that his granpappy used to run off it.

--
DougW




All times are GMT -4. The time now is 02:37 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.07119 seconds with 5 queries