Dana 44 Ring and Pinion Part Number
 

Hi,

Can someone tell what year/front/rear Dana 44 this Mopar 3.73 ring and
pinion part number is for? Part number is 050142841AA..
Thanks,

Re: Dana 44 Ring and Pinion Part Number
 

I not sure what your question is, but a 44 is a 44. So, I can tell
you your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
Jeep with it's carrier, up through the WJ aluminum housing rear and it's
C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
that used Dana 44s, except the reverse cut used on some front axles, of
course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

John Q Public wrote:
>
> Hi,
>
> Can someone tell what year/front/rear Dana 44 this Mopar 3.73 ring and
> pinion part number is for? Part number is 050142841AA..
> Thanks,

Re: Dana 44 Ring and Pinion Part Number
 

I not sure what your question is, but a 44 is a 44. So, I can tell
you your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
Jeep with it's carrier, up through the WJ aluminum housing rear and it's
C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
that used Dana 44s, except the reverse cut used on some front axles, of
course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

John Q Public wrote:
>
> Hi,
>
> Can someone tell what year/front/rear Dana 44 this Mopar 3.73 ring and
> pinion part number is for? Part number is 050142841AA..
> Thanks,

Re: Dana 44 Ring and Pinion Part Number
 

I not sure what your question is, but a 44 is a 44. So, I can tell
you your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
Jeep with it's carrier, up through the WJ aluminum housing rear and it's
C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
that used Dana 44s, except the reverse cut used on some front axles, of
course.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

John Q Public wrote:
>
> Hi,
>
> Can someone tell what year/front/rear Dana 44 this Mopar 3.73 ring and
> pinion part number is for? Part number is 050142841AA..
> Thanks,

Re: Dana 44 Ring and Pinion Part Number
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F97697B.240DAA5C@cox.net...
> your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
> Jeep with it's carrier, up through the WJ aluminum housing rear and it's
> C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
> that used Dana 44s, except the reverse cut used on some front axles, of
> course.

......and some say that you dont earn your keep around here.

--
Nathan W. Collier
http://7SlotGrille.com

Re: Dana 44 Ring and Pinion Part Number
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F97697B.240DAA5C@cox.net...
> your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
> Jeep with it's carrier, up through the WJ aluminum housing rear and it's
> C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
> that used Dana 44s, except the reverse cut used on some front axles, of
> course.

......and some say that you dont earn your keep around here.

--
Nathan W. Collier
http://7SlotGrille.com

Re: Dana 44 Ring and Pinion Part Number
 

"L.W. (ßill) ------ III" <----------@cox.net> wrote in message
news:3F97697B.240DAA5C@cox.net...
> your Dana 44 ring and pinion will fit in the rear of a 1946 CJ-2A
> Jeep with it's carrier, up through the WJ aluminum housing rear and it's
> C clip carrier. And the rest of old Dodges, GMs, Fords, Internationals,
> that used Dana 44s, except the reverse cut used on some front axles, of
> course.

......and some say that you dont earn your keep around here.

--
Nathan W. Collier
http://7SlotGrille.com