Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   clattery noise at front end of my engine (https://www.jeepscanada.com/jeep-mailing-list-32/clattery-noise-front-end-my-engine-26964/)

rjh44 04-24-2005 11:30 PM

clattery noise at front end of my engine
 
1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I was
hoping it might be the fan......took it off. Still clattering . Maybe the
alternator or power steering pump.......took them off. Still clattering
OK it must be the timing chain. Opened it up and the chain is pretty sloppy
and it has a chain tensioner device that's not even shown in my Haynes
manual. I will replace these parts next weekend. Hopefully that will do the
trick..........



twaldron 04-24-2005 11:33 PM

Re: clattery noise at front end of my engine
 
Harmonic balancer?

rjh44 wrote:

> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I was
> hoping it might be the fan......took it off. Still clattering . Maybe the
> alternator or power steering pump.......took them off. Still clattering
> OK it must be the timing chain. Opened it up and the chain is pretty sloppy
> and it has a chain tensioner device that's not even shown in my Haynes
> manual. I will replace these parts next weekend. Hopefully that will do the
> trick..........


--
__________________________________________________ _________
tw

71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

twaldron 04-24-2005 11:33 PM

Re: clattery noise at front end of my engine
 
Harmonic balancer?

rjh44 wrote:

> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I was
> hoping it might be the fan......took it off. Still clattering . Maybe the
> alternator or power steering pump.......took them off. Still clattering
> OK it must be the timing chain. Opened it up and the chain is pretty sloppy
> and it has a chain tensioner device that's not even shown in my Haynes
> manual. I will replace these parts next weekend. Hopefully that will do the
> trick..........


--
__________________________________________________ _________
tw

71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

twaldron 04-24-2005 11:33 PM

Re: clattery noise at front end of my engine
 
Harmonic balancer?

rjh44 wrote:

> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I was
> hoping it might be the fan......took it off. Still clattering . Maybe the
> alternator or power steering pump.......took them off. Still clattering
> OK it must be the timing chain. Opened it up and the chain is pretty sloppy
> and it has a chain tensioner device that's not even shown in my Haynes
> manual. I will replace these parts next weekend. Hopefully that will do the
> trick..........


--
__________________________________________________ _________
tw

71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

twaldron 04-24-2005 11:33 PM

Re: clattery noise at front end of my engine
 
Harmonic balancer?

rjh44 wrote:

> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I was
> hoping it might be the fan......took it off. Still clattering . Maybe the
> alternator or power steering pump.......took them off. Still clattering
> OK it must be the timing chain. Opened it up and the chain is pretty sloppy
> and it has a chain tensioner device that's not even shown in my Haynes
> manual. I will replace these parts next weekend. Hopefully that will do the
> trick..........


--
__________________________________________________ _________
tw

71 Bill Stroppe Baja Bronco
03 TJ Rubicon - Rubicon Express 4.5"
01 XJ Sport

There is a very fine line between "hobby" and "mental illness."
-- Dave Barry

Pronunciation: 'jEp
Function: noun
Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80-inch wheelbase,
1/4-ton capacity, and four-wheel drive used by the U.S. army in
World War II.

(Please remove the OBVIOUS to reply by email)
__________________________________________________ _________

Carlo 04-25-2005 12:48 AM

Re: clattery noise at front end of my engine
 
Amen to that one -
happened on my wife's explorer........... Was really loud- never expected a
harmonic balancer to clack-clack that loud.

placed a screw driver between my ear & every other part of that engine. By
the time I found it the hole in the crank was stripped. I was going to
heli-coil it. Everyone said it wouldn't work, but I figured I had nothing
to lose. I had put a lot of other heli-coils in a lot of other places in
B-52's, F-4's,F100's, SR71's, etc.......couldn't quite get the right angle
or leverage & broke the tap in the hole. Had to pull the engine half out to
get the tap out so I did the long block thing.

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:ZxZae.185$gd5.157@newssvr12.news.prodigy.com. ..
> Harmonic balancer?
>
> rjh44 wrote:
>
> > 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I

was
> > hoping it might be the fan......took it off. Still clattering . Maybe

the
> > alternator or power steering pump.......took them off. Still clattering
> > OK it must be the timing chain. Opened it up and the chain is pretty

sloppy
> > and it has a chain tensioner device that's not even shown in my Haynes
> > manual. I will replace these parts next weekend. Hopefully that will do

the
> > trick..........

>
> --
> __________________________________________________ _________
> tw
>
> 71 Bill Stroppe Baja Bronco
> 03 TJ Rubicon - Rubicon Express 4.5"
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________




Carlo 04-25-2005 12:48 AM

Re: clattery noise at front end of my engine
 
Amen to that one -
happened on my wife's explorer........... Was really loud- never expected a
harmonic balancer to clack-clack that loud.

placed a screw driver between my ear & every other part of that engine. By
the time I found it the hole in the crank was stripped. I was going to
heli-coil it. Everyone said it wouldn't work, but I figured I had nothing
to lose. I had put a lot of other heli-coils in a lot of other places in
B-52's, F-4's,F100's, SR71's, etc.......couldn't quite get the right angle
or leverage & broke the tap in the hole. Had to pull the engine half out to
get the tap out so I did the long block thing.

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:ZxZae.185$gd5.157@newssvr12.news.prodigy.com. ..
> Harmonic balancer?
>
> rjh44 wrote:
>
> > 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I

was
> > hoping it might be the fan......took it off. Still clattering . Maybe

the
> > alternator or power steering pump.......took them off. Still clattering
> > OK it must be the timing chain. Opened it up and the chain is pretty

sloppy
> > and it has a chain tensioner device that's not even shown in my Haynes
> > manual. I will replace these parts next weekend. Hopefully that will do

the
> > trick..........

>
> --
> __________________________________________________ _________
> tw
>
> 71 Bill Stroppe Baja Bronco
> 03 TJ Rubicon - Rubicon Express 4.5"
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________




Carlo 04-25-2005 12:48 AM

Re: clattery noise at front end of my engine
 
Amen to that one -
happened on my wife's explorer........... Was really loud- never expected a
harmonic balancer to clack-clack that loud.

placed a screw driver between my ear & every other part of that engine. By
the time I found it the hole in the crank was stripped. I was going to
heli-coil it. Everyone said it wouldn't work, but I figured I had nothing
to lose. I had put a lot of other heli-coils in a lot of other places in
B-52's, F-4's,F100's, SR71's, etc.......couldn't quite get the right angle
or leverage & broke the tap in the hole. Had to pull the engine half out to
get the tap out so I did the long block thing.

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:ZxZae.185$gd5.157@newssvr12.news.prodigy.com. ..
> Harmonic balancer?
>
> rjh44 wrote:
>
> > 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I

was
> > hoping it might be the fan......took it off. Still clattering . Maybe

the
> > alternator or power steering pump.......took them off. Still clattering
> > OK it must be the timing chain. Opened it up and the chain is pretty

sloppy
> > and it has a chain tensioner device that's not even shown in my Haynes
> > manual. I will replace these parts next weekend. Hopefully that will do

the
> > trick..........

>
> --
> __________________________________________________ _________
> tw
>
> 71 Bill Stroppe Baja Bronco
> 03 TJ Rubicon - Rubicon Express 4.5"
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________




Carlo 04-25-2005 12:48 AM

Re: clattery noise at front end of my engine
 
Amen to that one -
happened on my wife's explorer........... Was really loud- never expected a
harmonic balancer to clack-clack that loud.

placed a screw driver between my ear & every other part of that engine. By
the time I found it the hole in the crank was stripped. I was going to
heli-coil it. Everyone said it wouldn't work, but I figured I had nothing
to lose. I had put a lot of other heli-coils in a lot of other places in
B-52's, F-4's,F100's, SR71's, etc.......couldn't quite get the right angle
or leverage & broke the tap in the hole. Had to pull the engine half out to
get the tap out so I did the long block thing.

--
Carlo F. Serusa, Jr. RPh
carlo.jr at comcast DOTnet
'98 Sahara TJ - '89 YJ - '79 Scout II
O|||||||O
'92 Explorer '65 Mustang


"twaldron" <thomas@OBVIOUSrubicons.com> wrote in message
news:ZxZae.185$gd5.157@newssvr12.news.prodigy.com. ..
> Harmonic balancer?
>
> rjh44 wrote:
>
> > 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I

was
> > hoping it might be the fan......took it off. Still clattering . Maybe

the
> > alternator or power steering pump.......took them off. Still clattering
> > OK it must be the timing chain. Opened it up and the chain is pretty

sloppy
> > and it has a chain tensioner device that's not even shown in my Haynes
> > manual. I will replace these parts next weekend. Hopefully that will do

the
> > trick..........

>
> --
> __________________________________________________ _________
> tw
>
> 71 Bill Stroppe Baja Bronco
> 03 TJ Rubicon - Rubicon Express 4.5"
> 01 XJ Sport
>
> There is a very fine line between "hobby" and "mental illness."
> -- Dave Barry
>
> Pronunciation: 'jEp
> Function: noun
> Date: 1940
>
> Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
> A small general-purpose motor vehicle with 80-inch wheelbase,
> 1/4-ton capacity, and four-wheel drive used by the U.S. army in
> World War II.
>
> (Please remove the OBVIOUS to reply by email)
> __________________________________________________ _________




rjh44 05-01-2005 10:08 PM

Re: clattery noise at front end of my engine
 
Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
back together and the clattery noise is gone .
"rjh44" <rjh44@adelphia.com> wrote in message
news:uZudnU4GnaTE-fHfRVn-gg@adelphia.com...
> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I
> was hoping it might be the fan......took it off. Still clattering . Maybe
> the alternator or power steering pump.......took them off. Still
> clattering OK it must be the timing chain. Opened it up and the chain is
> pretty sloppy and it has a chain tensioner device that's not even shown in
> my Haynes manual. I will replace these parts next weekend. Hopefully that
> will do the trick..........
>
>




rjh44 05-01-2005 10:08 PM

Re: clattery noise at front end of my engine
 
Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
back together and the clattery noise is gone .
"rjh44" <rjh44@adelphia.com> wrote in message
news:uZudnU4GnaTE-fHfRVn-gg@adelphia.com...
> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I
> was hoping it might be the fan......took it off. Still clattering . Maybe
> the alternator or power steering pump.......took them off. Still
> clattering OK it must be the timing chain. Opened it up and the chain is
> pretty sloppy and it has a chain tensioner device that's not even shown in
> my Haynes manual. I will replace these parts next weekend. Hopefully that
> will do the trick..........
>
>




rjh44 05-01-2005 10:08 PM

Re: clattery noise at front end of my engine
 
Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
back together and the clattery noise is gone .
"rjh44" <rjh44@adelphia.com> wrote in message
news:uZudnU4GnaTE-fHfRVn-gg@adelphia.com...
> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I
> was hoping it might be the fan......took it off. Still clattering . Maybe
> the alternator or power steering pump.......took them off. Still
> clattering OK it must be the timing chain. Opened it up and the chain is
> pretty sloppy and it has a chain tensioner device that's not even shown in
> my Haynes manual. I will replace these parts next weekend. Hopefully that
> will do the trick..........
>
>




rjh44 05-01-2005 10:08 PM

Re: clattery noise at front end of my engine
 
Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
back together and the clattery noise is gone .
"rjh44" <rjh44@adelphia.com> wrote in message
news:uZudnU4GnaTE-fHfRVn-gg@adelphia.com...
> 1986 CJ7 4 cylinder (150K miles but engine was rebuilt at 90K) I
> was hoping it might be the fan......took it off. Still clattering . Maybe
> the alternator or power steering pump.......took them off. Still
> clattering OK it must be the timing chain. Opened it up and the chain is
> pretty sloppy and it has a chain tensioner device that's not even shown in
> my Haynes manual. I will replace these parts next weekend. Hopefully that
> will do the trick..........
>
>




L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 05-01-2005 10:26 PM

Re: clattery noise at front end of my engine
 
Cool. Thanks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

rjh44 wrote:
>
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 05-01-2005 10:26 PM

Re: clattery noise at front end of my engine
 
Cool. Thanks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

rjh44 wrote:
>
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 05-01-2005 10:26 PM

Re: clattery noise at front end of my engine
 
Cool. Thanks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

rjh44 wrote:
>
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 05-01-2005 10:26 PM

Re: clattery noise at front end of my engine
 
Cool. Thanks.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

rjh44 wrote:
>
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


DougW 05-01-2005 11:52 PM

Re: clattery noise at front end of my engine
 
rjh44 did pass the time by typing:
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


Good to hear you found the problem.

If you don't mind, how many miles did you have on her
when this happened.

--
DougW



DougW 05-01-2005 11:52 PM

Re: clattery noise at front end of my engine
 
rjh44 did pass the time by typing:
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


Good to hear you found the problem.

If you don't mind, how many miles did you have on her
when this happened.

--
DougW



DougW 05-01-2005 11:52 PM

Re: clattery noise at front end of my engine
 
rjh44 did pass the time by typing:
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


Good to hear you found the problem.

If you don't mind, how many miles did you have on her
when this happened.

--
DougW



DougW 05-01-2005 11:52 PM

Re: clattery noise at front end of my engine
 
rjh44 did pass the time by typing:
> Yesterday I Replaced the timing chain, sprockets and chain tensioner,put it
> back together and the clattery noise is gone .


Good to hear you found the problem.

If you don't mind, how many miles did you have on her
when this happened.

--
DougW



DougW 05-01-2005 11:54 PM

Re: clattery noise at front end of my engine
 
DougW did pass the time by typing:

Nevermind.. Guess I should have read the post
again.. the answer to my question was in there.


<fx: puts on dunce cap and sits in corner of newsgroup>

--
DougW



DougW 05-01-2005 11:54 PM

Re: clattery noise at front end of my engine
 
DougW did pass the time by typing:

Nevermind.. Guess I should have read the post
again.. the answer to my question was in there.


<fx: puts on dunce cap and sits in corner of newsgroup>

--
DougW



DougW 05-01-2005 11:54 PM

Re: clattery noise at front end of my engine
 
DougW did pass the time by typing:

Nevermind.. Guess I should have read the post
again.. the answer to my question was in there.


<fx: puts on dunce cap and sits in corner of newsgroup>

--
DougW



DougW 05-01-2005 11:54 PM

Re: clattery noise at front end of my engine
 
DougW did pass the time by typing:

Nevermind.. Guess I should have read the post
again.. the answer to my question was in there.


<fx: puts on dunce cap and sits in corner of newsgroup>

--
DougW




All times are GMT -4. The time now is 07:17 PM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.06845 seconds with 5 queries