CJ7 Frame Needed
 

I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
half about a foot forward of the wheel wells, so front end damage is not an
issue. Rear suspension and axle with wheels is a plus.

Thanks
Scott
91YJ

--


---------------------------------------------------------------------
"Are you still wasting your time with spam?...
There is a solution!"

Protected by GIANT Company's Spam Inspector
The most powerful anti-spam software available.
http://mail.spaminspector.com

Re: CJ7 Frame Needed
 

http://www.saturdaybang.com/jeep/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

reconair wrote:
>
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com

Re: CJ7 Frame Needed
 

http://www.saturdaybang.com/jeep/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

reconair wrote:
>
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com

Re: CJ7 Frame Needed
 

http://www.saturdaybang.com/jeep/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

reconair wrote:
>
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com

Re: CJ7 Frame Needed
 

http://www.saturdaybang.com/jeep/
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

reconair wrote:
>
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com

Re: CJ7 Frame Needed
 

Did your frame crack at the rear spring perches too? Really common.
Don't know if you're interested in buying new or just want to cut costs.
I think Quadratec sells 'em for about $1700; mandrel bent and powder coated
(
http://www.quadratec.com/cgi-bin/sgi...04041713504840 )
..
Matkins also makes them with various options (
http://www.matkinsextreme.com/Jeeps/jeep%20prices.htm ) at a comparable
price and boast better strength. I think 4Wheel Drive Hardware sells 'em
too.
I think there are divergent opinions about construction and mandrel
bending as well as boxing and galvanizing (some say galvanizing isn't worth
the extra cost but it couldn't hurt).
IMHO, if I were working my Jeep, I wouldn't want a frame that's had a
collision. It might look straight but could be off in back anyway. Don't
really know if it was straightened just to sell it. Sounds crazy but you
know there are people who'd yank it with their bumper just 'cause you said
the rear needed to straight. Anyway, I'm just serving up food for thought
that might've not been on your menu.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"reconair" <reconair@staffnet.com> wrote in message
news:1071fr2357c7obe@corp.supernews.com...
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not
an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com
>
>
>

Re: CJ7 Frame Needed
 

Did your frame crack at the rear spring perches too? Really common.
Don't know if you're interested in buying new or just want to cut costs.
I think Quadratec sells 'em for about $1700; mandrel bent and powder coated
(
http://www.quadratec.com/cgi-bin/sgi...04041713504840 )
..
Matkins also makes them with various options (
http://www.matkinsextreme.com/Jeeps/jeep%20prices.htm ) at a comparable
price and boast better strength. I think 4Wheel Drive Hardware sells 'em
too.
I think there are divergent opinions about construction and mandrel
bending as well as boxing and galvanizing (some say galvanizing isn't worth
the extra cost but it couldn't hurt).
IMHO, if I were working my Jeep, I wouldn't want a frame that's had a
collision. It might look straight but could be off in back anyway. Don't
really know if it was straightened just to sell it. Sounds crazy but you
know there are people who'd yank it with their bumper just 'cause you said
the rear needed to straight. Anyway, I'm just serving up food for thought
that might've not been on your menu.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"reconair" <reconair@staffnet.com> wrote in message
news:1071fr2357c7obe@corp.supernews.com...
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not
an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com
>
>
>

Re: CJ7 Frame Needed
 

Did your frame crack at the rear spring perches too? Really common.
Don't know if you're interested in buying new or just want to cut costs.
I think Quadratec sells 'em for about $1700; mandrel bent and powder coated
(
http://www.quadratec.com/cgi-bin/sgi...04041713504840 )
..
Matkins also makes them with various options (
http://www.matkinsextreme.com/Jeeps/jeep%20prices.htm ) at a comparable
price and boast better strength. I think 4Wheel Drive Hardware sells 'em
too.
I think there are divergent opinions about construction and mandrel
bending as well as boxing and galvanizing (some say galvanizing isn't worth
the extra cost but it couldn't hurt).
IMHO, if I were working my Jeep, I wouldn't want a frame that's had a
collision. It might look straight but could be off in back anyway. Don't
really know if it was straightened just to sell it. Sounds crazy but you
know there are people who'd yank it with their bumper just 'cause you said
the rear needed to straight. Anyway, I'm just serving up food for thought
that might've not been on your menu.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"reconair" <reconair@staffnet.com> wrote in message
news:1071fr2357c7obe@corp.supernews.com...
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not
an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com
>
>
>

Re: CJ7 Frame Needed
 

Did your frame crack at the rear spring perches too? Really common.
Don't know if you're interested in buying new or just want to cut costs.
I think Quadratec sells 'em for about $1700; mandrel bent and powder coated
(
http://www.quadratec.com/cgi-bin/sgi...04041713504840 )
..
Matkins also makes them with various options (
http://www.matkinsextreme.com/Jeeps/jeep%20prices.htm ) at a comparable
price and boast better strength. I think 4Wheel Drive Hardware sells 'em
too.
I think there are divergent opinions about construction and mandrel
bending as well as boxing and galvanizing (some say galvanizing isn't worth
the extra cost but it couldn't hurt).
IMHO, if I were working my Jeep, I wouldn't want a frame that's had a
collision. It might look straight but could be off in back anyway. Don't
really know if it was straightened just to sell it. Sounds crazy but you
know there are people who'd yank it with their bumper just 'cause you said
the rear needed to straight. Anyway, I'm just serving up food for thought
that might've not been on your menu.
o_o_o_o
Best Regards, /| ,[_____],
Jim, WP3JQ |¯¯¯L --O|||||||O-
()_)¯()_) ¯¯¯¯¯ )_)
EM60qk 30.447439N 086.628959W
"reconair" <reconair@staffnet.com> wrote in message
news:1071fr2357c7obe@corp.supernews.com...
> I'm looking for a CJ7 frame any year in Northern VA. I only need the rear
> half about a foot forward of the wheel wells, so front end damage is not
an
> issue. Rear suspension and axle with wheels is a plus.
>
> Thanks
> Scott
> 91YJ
>
> --
>
>
> ---------------------------------------------------------------------
> "Are you still wasting your time with spam?...
> There is a solution!"
>
> Protected by GIANT Company's Spam Inspector
> The most powerful anti-spam software available.
> http://mail.spaminspector.com
>
>
>