Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
commonly known as the "four banger". The bore is I have 5 hanging vacuum
hoses and 7 tubes looking for hoses and no idea what goes where as all my
marking have rubbed off. There is a vacuum hose routing diagram under the
hood but it shows afr fewer hoses that I have hanging around and does not
help me.

Can someone please point me to a routing diagram? In case someone knows the
answer to this or has a simila Jeep I will list here what pipes looking for
hoses I have.

One pipe on the choke solenoid
Three pipes on the plenum that feed straight into the the intake manifold
just inder the carb and
Two tubes sticking out of the middle section of the carb body
One from the bottom section of the carb.

Hope someone can help.

Thanks

Michael

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

The one going to the choke pull-off, will be full manifold vacuum.
Others is be going to devices much like the six cylinder:
http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45da18c8$0$27081$4c368faf@roadrunner.com...
> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
> commonly known as the "four banger". The bore is I have 5 hanging vacuum
> hoses and 7 tubes looking for hoses and no idea what goes where as all my
> marking have rubbed off. There is a vacuum hose routing diagram under the
> hood but it shows afr fewer hoses that I have hanging around and does not
> help me.
>
> Can someone please point me to a routing diagram? In case someone knows
the
> answer to this or has a simila Jeep I will list here what pipes looking
for
> hoses I have.
>
> One pipe on the choke solenoid
> Three pipes on the plenum that feed straight into the the intake manifold
> just inder the carb and
> Two tubes sticking out of the middle section of the carb body
> One from the bottom section of the carb.
>
> Hope someone can help.
>
> Thanks
>
> Michael
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

The one going to the choke pull-off, will be full manifold vacuum.
Others is be going to devices much like the six cylinder:
http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45da18c8$0$27081$4c368faf@roadrunner.com...
> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
> commonly known as the "four banger". The bore is I have 5 hanging vacuum
> hoses and 7 tubes looking for hoses and no idea what goes where as all my
> marking have rubbed off. There is a vacuum hose routing diagram under the
> hood but it shows afr fewer hoses that I have hanging around and does not
> help me.
>
> Can someone please point me to a routing diagram? In case someone knows
the
> answer to this or has a simila Jeep I will list here what pipes looking
for
> hoses I have.
>
> One pipe on the choke solenoid
> Three pipes on the plenum that feed straight into the the intake manifold
> just inder the carb and
> Two tubes sticking out of the middle section of the carb body
> One from the bottom section of the carb.
>
> Hope someone can help.
>
> Thanks
>
> Michael
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

The one going to the choke pull-off, will be full manifold vacuum.
Others is be going to devices much like the six cylinder:
http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
http://home.sprynet.com/~dale02/list.htm
God Bless America, Bill 0|||||||0
mailto:-------------------- http://www.----------.com/

"MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
news:45da18c8$0$27081$4c368faf@roadrunner.com...
> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
> commonly known as the "four banger". The bore is I have 5 hanging vacuum
> hoses and 7 tubes looking for hoses and no idea what goes where as all my
> marking have rubbed off. There is a vacuum hose routing diagram under the
> hood but it shows afr fewer hoses that I have hanging around and does not
> help me.
>
> Can someone please point me to a routing diagram? In case someone knows
the
> answer to this or has a simila Jeep I will list here what pipes looking
for
> hoses I have.
>
> One pipe on the choke solenoid
> Three pipes on the plenum that feed straight into the the intake manifold
> just inder the carb and
> Two tubes sticking out of the middle section of the carb body
> One from the bottom section of the carb.
>
> Hope someone can help.
>
> Thanks
>
> Michael
>
>



--
Posted via a free Usenet account from http://www.teranews.com

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

I've ben to the references here that are still live (Tom Collin's site is no
more) and while I have found a couple of hints for individual components I
am still unsure of what to do. I have found nothing that is specifically for
the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
diagrams please post.

Thanks Bill for what you have given I'll make the best of it until I get
more info. Who else here has the 151 4cyl engine? Does anyone?
Michael

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
> The one going to the choke pull-off, will be full manifold vacuum.
> Others is be going to devices much like the six cylinder:
> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
> http://home.sprynet.com/~dale02/list.htm
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>> marking have rubbed off. There is a vacuum hose routing diagram under the
>> hood but it shows afr fewer hoses that I have hanging around and does not
>> help me.
>>
>> Can someone please point me to a routing diagram? In case someone knows
> the
>> answer to this or has a simila Jeep I will list here what pipes looking
> for
>> hoses I have.
>>
>> One pipe on the choke solenoid
>> Three pipes on the plenum that feed straight into the the intake manifold
>> just inder the carb and
>> Two tubes sticking out of the middle section of the carb body
>> One from the bottom section of the carb.
>>
>> Hope someone can help.
>>
>> Thanks
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

I've ben to the references here that are still live (Tom Collin's site is no
more) and while I have found a couple of hints for individual components I
am still unsure of what to do. I have found nothing that is specifically for
the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
diagrams please post.

Thanks Bill for what you have given I'll make the best of it until I get
more info. Who else here has the 151 4cyl engine? Does anyone?
Michael

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
> The one going to the choke pull-off, will be full manifold vacuum.
> Others is be going to devices much like the six cylinder:
> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
> http://home.sprynet.com/~dale02/list.htm
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>> marking have rubbed off. There is a vacuum hose routing diagram under the
>> hood but it shows afr fewer hoses that I have hanging around and does not
>> help me.
>>
>> Can someone please point me to a routing diagram? In case someone knows
> the
>> answer to this or has a simila Jeep I will list here what pipes looking
> for
>> hoses I have.
>>
>> One pipe on the choke solenoid
>> Three pipes on the plenum that feed straight into the the intake manifold
>> just inder the carb and
>> Two tubes sticking out of the middle section of the carb body
>> One from the bottom section of the carb.
>>
>> Hope someone can help.
>>
>> Thanks
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

I've ben to the references here that are still live (Tom Collin's site is no
more) and while I have found a couple of hints for individual components I
am still unsure of what to do. I have found nothing that is specifically for
the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
diagrams please post.

Thanks Bill for what you have given I'll make the best of it until I get
more info. Who else here has the 151 4cyl engine? Does anyone?
Michael

"L.W. (Bill) ------ III" <----------@cox.net> wrote in message
news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
> The one going to the choke pull-off, will be full manifold vacuum.
> Others is be going to devices much like the six cylinder:
> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
> http://home.sprynet.com/~dale02/list.htm
> God Bless America, Bill 0|||||||0
> mailto:-------------------- http://www.----------.com/
>
> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>> marking have rubbed off. There is a vacuum hose routing diagram under the
>> hood but it shows afr fewer hoses that I have hanging around and does not
>> help me.
>>
>> Can someone please point me to a routing diagram? In case someone knows
> the
>> answer to this or has a simila Jeep I will list here what pipes looking
> for
>> hoses I have.
>>
>> One pipe on the choke solenoid
>> Three pipes on the plenum that feed straight into the the intake manifold
>> just inder the carb and
>> Two tubes sticking out of the middle section of the carb body
>> One from the bottom section of the carb.
>>
>> Hope someone can help.
>>
>> Thanks
>>
>> Michael
>>
>>
>
>
>
> --
> Posted via a free Usenet account from http://www.teranews.com
>

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

Too bad you don't live close to Toronto, I am pretty good at figuring
out where vacuum lines should go to.

I was just looking in the Haynes CJ manual, and it does cover just about
all of your vacuum line plumbing routing and components for the feedback
carb's operation. It is not an expensive book and most auto stores sell
it. Unfortunately my book is broken right at the 151 emissions section
and is missing a few pages. I still see most of the system's setup.

If you are running the full emissions package, the lines route
differently than if you just need functioning main items.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

MStevens003 wrote:
> I've ben to the references here that are still live (Tom Collin's site is no
> more) and while I have found a couple of hints for individual components I
> am still unsure of what to do. I have found nothing that is specifically for
> the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
> diagrams please post.
>
> Thanks Bill for what you have given I'll make the best of it until I get
> more info. Who else here has the 151 4cyl engine? Does anyone?
> Michael
>
> "L.W. (Bill) ------ III" <----------@cox.net> wrote in message
> news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
>> The one going to the choke pull-off, will be full manifold vacuum.
>> Others is be going to devices much like the six cylinder:
>> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
>> http://home.sprynet.com/~dale02/list.htm
>> God Bless America, Bill 0|||||||0
>> mailto:-------------------- http://www.----------.com/
>>
>> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
>> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>>> marking have rubbed off. There is a vacuum hose routing diagram under the
>>> hood but it shows afr fewer hoses that I have hanging around and does not
>>> help me.
>>>
>>> Can someone please point me to a routing diagram? In case someone knows
>> the
>>> answer to this or has a simila Jeep I will list here what pipes looking
>> for
>>> hoses I have.
>>>
>>> One pipe on the choke solenoid
>>> Three pipes on the plenum that feed straight into the the intake manifold
>>> just inder the carb and
>>> Two tubes sticking out of the middle section of the carb body
>>> One from the bottom section of the carb.
>>>
>>> Hope someone can help.
>>>
>>> Thanks
>>>
>>> Michael
>>>
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

Too bad you don't live close to Toronto, I am pretty good at figuring
out where vacuum lines should go to.

I was just looking in the Haynes CJ manual, and it does cover just about
all of your vacuum line plumbing routing and components for the feedback
carb's operation. It is not an expensive book and most auto stores sell
it. Unfortunately my book is broken right at the 151 emissions section
and is missing a few pages. I still see most of the system's setup.

If you are running the full emissions package, the lines route
differently than if you just need functioning main items.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

MStevens003 wrote:
> I've ben to the references here that are still live (Tom Collin's site is no
> more) and while I have found a couple of hints for individual components I
> am still unsure of what to do. I have found nothing that is specifically for
> the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
> diagrams please post.
>
> Thanks Bill for what you have given I'll make the best of it until I get
> more info. Who else here has the 151 4cyl engine? Does anyone?
> Michael
>
> "L.W. (Bill) ------ III" <----------@cox.net> wrote in message
> news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
>> The one going to the choke pull-off, will be full manifold vacuum.
>> Others is be going to devices much like the six cylinder:
>> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
>> http://home.sprynet.com/~dale02/list.htm
>> God Bless America, Bill 0|||||||0
>> mailto:-------------------- http://www.----------.com/
>>
>> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
>> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>>> marking have rubbed off. There is a vacuum hose routing diagram under the
>>> hood but it shows afr fewer hoses that I have hanging around and does not
>>> help me.
>>>
>>> Can someone please point me to a routing diagram? In case someone knows
>> the
>>> answer to this or has a simila Jeep I will list here what pipes looking
>> for
>>> hoses I have.
>>>
>>> One pipe on the choke solenoid
>>> Three pipes on the plenum that feed straight into the the intake manifold
>>> just inder the carb and
>>> Two tubes sticking out of the middle section of the carb body
>>> One from the bottom section of the carb.
>>>
>>> Hope someone can help.
>>>
>>> Thanks
>>>
>>> Michael
>>>
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>

Re: Cj5/151 with Rochester SE2. Need Vacuum Hose Diagram
 

Too bad you don't live close to Toronto, I am pretty good at figuring
out where vacuum lines should go to.

I was just looking in the Haynes CJ manual, and it does cover just about
all of your vacuum line plumbing routing and components for the feedback
carb's operation. It is not an expensive book and most auto stores sell
it. Unfortunately my book is broken right at the 151 emissions section
and is missing a few pages. I still see most of the system's setup.

If you are running the full emissions package, the lines route
differently than if you just need functioning main items.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

MStevens003 wrote:
> I've ben to the references here that are still live (Tom Collin's site is no
> more) and while I have found a couple of hints for individual components I
> am still unsure of what to do. I have found nothing that is specifically for
> the 4cyl 151 engine with the 2SE so if anyone knows of links to vacuum
> diagrams please post.
>
> Thanks Bill for what you have given I'll make the best of it until I get
> more info. Who else here has the 151 4cyl engine? Does anyone?
> Michael
>
> "L.W. (Bill) ------ III" <----------@cox.net> wrote in message
> news:45da3b47$0$16362$88260bb3@free.teranews.com.. .
>> The one going to the choke pull-off, will be full manifold vacuum.
>> Others is be going to devices much like the six cylinder:
>> http://www.jedi.com/obiwan/jeep/misc/vacuumhoses.html And newer YJ:
>> http://home.sprynet.com/~dale02/list.htm
>> God Bless America, Bill 0|||||||0
>> mailto:-------------------- http://www.----------.com/
>>
>> "MStevens003" <MSTEVENS003@dc.rr.com> wrote in message
>> news:45da18c8$0$27081$4c368faf@roadrunner.com...
>>> Just rebuilt the Rochester SE2 carb on my '81 CJ5. It's the 151 engine
>>> commonly known as the "four banger". The bore is I have 5 hanging vacuum
>>> hoses and 7 tubes looking for hoses and no idea what goes where as all my
>>> marking have rubbed off. There is a vacuum hose routing diagram under the
>>> hood but it shows afr fewer hoses that I have hanging around and does not
>>> help me.
>>>
>>> Can someone please point me to a routing diagram? In case someone knows
>> the
>>> answer to this or has a simila Jeep I will list here what pipes looking
>> for
>>> hoses I have.
>>>
>>> One pipe on the choke solenoid
>>> Three pipes on the plenum that feed straight into the the intake manifold
>>> just inder the carb and
>>> Two tubes sticking out of the middle section of the carb body
>>> One from the bottom section of the carb.
>>>
>>> Hope someone can help.
>>>
>>> Thanks
>>>
>>> Michael
>>>
>>>
>>
>>
>> --
>> Posted via a free Usenet account from http://www.teranews.com
>>
>
>