Re: CJ dash replacement
 

Thanks for the responses. I don't have a CJ now, so I couldn't run out the
the garage and check... :-) (All I have is a YJ and a TJ)

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BBB41B.E3C6D366@sympatico.ca...
> I would believe it has to be the other way around. You need to prop up
> the hard top to fold the windshield down if you actually have the hard
> top 'on' the Jeep....
>
> The dash has bolts all along the top under the lip of the windshield.
>
> I would recommend you start using a good penetrating oil twice a day for
> a week on the windshield hinge pins before trying to fold it. The are
> usually seized if not used.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeff Scherb wrote:
> >
> > I was reading an article on replacing a CJ dash just now, and it says to
> > fold the windshield down, and prop up the hardtop.
> >
> > Just looking at it, I don't understand why these two steps are
necessary.
> > Can anyone tell me?
> >
> > thanks,
> > jeff

Re: CJ dash replacement
 

Thanks for the responses. I don't have a CJ now, so I couldn't run out the
the garage and check... :-) (All I have is a YJ and a TJ)

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BBB41B.E3C6D366@sympatico.ca...
> I would believe it has to be the other way around. You need to prop up
> the hard top to fold the windshield down if you actually have the hard
> top 'on' the Jeep....
>
> The dash has bolts all along the top under the lip of the windshield.
>
> I would recommend you start using a good penetrating oil twice a day for
> a week on the windshield hinge pins before trying to fold it. The are
> usually seized if not used.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeff Scherb wrote:
> >
> > I was reading an article on replacing a CJ dash just now, and it says to
> > fold the windshield down, and prop up the hardtop.
> >
> > Just looking at it, I don't understand why these two steps are
necessary.
> > Can anyone tell me?
> >
> > thanks,
> > jeff

Re: CJ dash replacement
 

Thanks for the responses. I don't have a CJ now, so I couldn't run out the
the garage and check... :-) (All I have is a YJ and a TJ)

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40BBB41B.E3C6D366@sympatico.ca...
> I would believe it has to be the other way around. You need to prop up
> the hard top to fold the windshield down if you actually have the hard
> top 'on' the Jeep....
>
> The dash has bolts all along the top under the lip of the windshield.
>
> I would recommend you start using a good penetrating oil twice a day for
> a week on the windshield hinge pins before trying to fold it. The are
> usually seized if not used.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jeff Scherb wrote:
> >
> > I was reading an article on replacing a CJ dash just now, and it says to
> > fold the windshield down, and prop up the hardtop.
> >
> > Just looking at it, I don't understand why these two steps are
necessary.
> > Can anyone tell me?
> >
> > thanks,
> > jeff

Re: CJ dash replacement
 

As Mike said, you'll need to prop up the hard top to fold the windshield
down, and the 1/4" lip of the dash goes under the windshield weather
strip.

You didn't mention which year CJ. Between 1976 and 1982, all of the dash
mounting screws are on the face of the dash, but if you have a padded dash
you'll have to fold the windshield down to get at the last few screws for
the pad, and the padding has to come off before first. If you don't have
the padding, you won't have to fold the windshield down.

Generally, the screws go into rivetnuts in the cowl. The two screws above
the steering column for that model hold the steering column brace. It
won't go anywhere when you release them but it will slop around a bit.


On Mon, 31 May 2004, Jeff Scherb wrote:

> I was reading an article on replacing a CJ dash just now, and it says to
> fold the windshield down, and prop up the hardtop.
>
> Just looking at it, I don't understand why these two steps are necessary.
> Can anyone tell me?
>
> thanks,
> jeff
>
>
>

Re: CJ dash replacement
 

As Mike said, you'll need to prop up the hard top to fold the windshield
down, and the 1/4" lip of the dash goes under the windshield weather
strip.

You didn't mention which year CJ. Between 1976 and 1982, all of the dash
mounting screws are on the face of the dash, but if you have a padded dash
you'll have to fold the windshield down to get at the last few screws for
the pad, and the padding has to come off before first. If you don't have
the padding, you won't have to fold the windshield down.

Generally, the screws go into rivetnuts in the cowl. The two screws above
the steering column for that model hold the steering column brace. It
won't go anywhere when you release them but it will slop around a bit.


On Mon, 31 May 2004, Jeff Scherb wrote:

> I was reading an article on replacing a CJ dash just now, and it says to
> fold the windshield down, and prop up the hardtop.
>
> Just looking at it, I don't understand why these two steps are necessary.
> Can anyone tell me?
>
> thanks,
> jeff
>
>
>

Re: CJ dash replacement
 

As Mike said, you'll need to prop up the hard top to fold the windshield
down, and the 1/4" lip of the dash goes under the windshield weather
strip.

You didn't mention which year CJ. Between 1976 and 1982, all of the dash
mounting screws are on the face of the dash, but if you have a padded dash
you'll have to fold the windshield down to get at the last few screws for
the pad, and the padding has to come off before first. If you don't have
the padding, you won't have to fold the windshield down.

Generally, the screws go into rivetnuts in the cowl. The two screws above
the steering column for that model hold the steering column brace. It
won't go anywhere when you release them but it will slop around a bit.


On Mon, 31 May 2004, Jeff Scherb wrote:

> I was reading an article on replacing a CJ dash just now, and it says to
> fold the windshield down, and prop up the hardtop.
>
> Just looking at it, I don't understand why these two steps are necessary.
> Can anyone tell me?
>
> thanks,
> jeff
>
>
>

Re: CJ dash replacement
 

As Mike said, you'll need to prop up the hard top to fold the windshield
down, and the 1/4" lip of the dash goes under the windshield weather
strip.

You didn't mention which year CJ. Between 1976 and 1982, all of the dash
mounting screws are on the face of the dash, but if you have a padded dash
you'll have to fold the windshield down to get at the last few screws for
the pad, and the padding has to come off before first. If you don't have
the padding, you won't have to fold the windshield down.

Generally, the screws go into rivetnuts in the cowl. The two screws above
the steering column for that model hold the steering column brace. It
won't go anywhere when you release them but it will slop around a bit.


On Mon, 31 May 2004, Jeff Scherb wrote:

> I was reading an article on replacing a CJ dash just now, and it says to
> fold the windshield down, and prop up the hardtop.
>
> Just looking at it, I don't understand why these two steps are necessary.
> Can anyone tell me?
>
> thanks,
> jeff
>
>
>