![]() |
Re: CJ Brake Caliper Questions
I replaced mine. They were difficult to pop off the hubs due to rust.
I used lots of anti seize when putting things back together. Mike Rod Gramlich wrote: > > Did you also do a rotor replacement / turning ??? > > Are the rotors difficult to replace (i.e. get off the hub) ?? > > "Mike Romain" <romainm@sympatico.ca> wrote in message > news:4360E18B.8A231893@sympatico.ca... > > I just went and got replacements for mine when I rebuilt the brakes. > > The replacements were less than $25.00 each with the core charge for the > > old one. > > > > Mike > > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > 88 Cherokee 235 BFG AT's > > > > Jack-Jack wrote: > > > > > > I have the front calipers off as I am in the middle of a complete brake > > > overhaul. > > > > > > My questions are: While I have the calipers off is there any way to A: > > > Insure the quality of the rubber seals AND B: Any way to flush the > > > calipers out from the inside while they are off? > > > > > > The fluid running through them was pretty nasty! > > > > > > Thanks |
Re: CJ Brake Caliper Questions
You can buy a kit of rubber parts and rebuild the calipers, then you will
ensure the quality of the rubber and flush them at the same time. "Jack-Jack" <alpath@sbcglobal.net> wrote in message news:1130382138.545981.213790@f14g2000cwb.googlegr oups.com... >I have the front calipers off as I am in the middle of a complete brake > overhaul. > > My questions are: While I have the calipers off is there any way to A: > Insure the quality of the rubber seals AND B: Any way to flush the > calipers out from the inside while they are off? > > The fluid running through them was pretty nasty! > > Thanks > |
Re: CJ Brake Caliper Questions
You can buy a kit of rubber parts and rebuild the calipers, then you will
ensure the quality of the rubber and flush them at the same time. "Jack-Jack" <alpath@sbcglobal.net> wrote in message news:1130382138.545981.213790@f14g2000cwb.googlegr oups.com... >I have the front calipers off as I am in the middle of a complete brake > overhaul. > > My questions are: While I have the calipers off is there any way to A: > Insure the quality of the rubber seals AND B: Any way to flush the > calipers out from the inside while they are off? > > The fluid running through them was pretty nasty! > > Thanks > |
Re: CJ Brake Caliper Questions
You can buy a kit of rubber parts and rebuild the calipers, then you will
ensure the quality of the rubber and flush them at the same time. "Jack-Jack" <alpath@sbcglobal.net> wrote in message news:1130382138.545981.213790@f14g2000cwb.googlegr oups.com... >I have the front calipers off as I am in the middle of a complete brake > overhaul. > > My questions are: While I have the calipers off is there any way to A: > Insure the quality of the rubber seals AND B: Any way to flush the > calipers out from the inside while they are off? > > The fluid running through them was pretty nasty! > > Thanks > |
Re: CJ Brake Caliper Questions
Rebuild Kits: $17
Rebuilt Calipers with ALL the hardware $18 w/core x |
Re: CJ Brake Caliper Questions
Rebuild Kits: $17
Rebuilt Calipers with ALL the hardware $18 w/core x |
Re: CJ Brake Caliper Questions
Rebuild Kits: $17
Rebuilt Calipers with ALL the hardware $18 w/core x |
Re: CJ Brake Caliper Questions
Jack-Jack did pass the time by typing:
> Rebuild Kits: $17 > Rebuilt Calipers with ALL the hardware $18 w/core x The only thing I'd add about rebuilt parts is watch the quality. With the cheap/china/korea stuff you get what you pay for. Factory is almost always higher quality metal and castings. -- DougW |
Re: CJ Brake Caliper Questions
Jack-Jack did pass the time by typing:
> Rebuild Kits: $17 > Rebuilt Calipers with ALL the hardware $18 w/core x The only thing I'd add about rebuilt parts is watch the quality. With the cheap/china/korea stuff you get what you pay for. Factory is almost always higher quality metal and castings. -- DougW |
Re: CJ Brake Caliper Questions
Jack-Jack did pass the time by typing:
> Rebuild Kits: $17 > Rebuilt Calipers with ALL the hardware $18 w/core x The only thing I'd add about rebuilt parts is watch the quality. With the cheap/china/korea stuff you get what you pay for. Factory is almost always higher quality metal and castings. -- DougW |
All times are GMT -4. The time now is 07:36 AM. |
© 2024 MH Sub I, LLC dba Internet Brands