CANT PUSH CLUTCH PEDAL DOWN
 

So I'm driving today and go to shift nd the clutch wont budge, could
not move it down.
Thought I had ny foot on the brake btg mistake.

So start to hobble home in first gear and as I'm driving oedal is able
to move so I can shift, seems to stick at the top but if I feather it
gently the pedal moves so I can shift.

Did a search and mots posts indicate a master cyl issue.
Any of you guys have any ideas?

Re: CANT PUSH CLUTCH PEDAL DOWN
 

Mike Romain of this group has had his throw out bearing wear a
notch in the input shaft sleeve, that stop it from releasing. I have had
the pressure plate come apart and a spring jam in it that wouldn't allow
it to release. I've never heard of a master cylinder jamming, just
leaking, and usually goes to the floor without releasing the clutch.
What are you driving?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

ufatbastehd wrote:
>
> So I'm driving today and go to shift nd the clutch wont budge, could
> not move it down.
> Thought I had ny foot on the brake btg mistake.
>
> So start to hobble home in first gear and as I'm driving oedal is able
> to move so I can shift, seems to stick at the top but if I feather it
> gently the pedal moves so I can shift.
>
> Did a search and mots posts indicate a master cyl issue.
> Any of you guys have any ideas?

Re: CANT PUSH CLUTCH PEDAL DOWN
 

Mike Romain of this group has had his throw out bearing wear a
notch in the input shaft sleeve, that stop it from releasing. I have had
the pressure plate come apart and a spring jam in it that wouldn't allow
it to release. I've never heard of a master cylinder jamming, just
leaking, and usually goes to the floor without releasing the clutch.
What are you driving?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

ufatbastehd wrote:
>
> So I'm driving today and go to shift nd the clutch wont budge, could
> not move it down.
> Thought I had ny foot on the brake btg mistake.
>
> So start to hobble home in first gear and as I'm driving oedal is able
> to move so I can shift, seems to stick at the top but if I feather it
> gently the pedal moves so I can shift.
>
> Did a search and mots posts indicate a master cyl issue.
> Any of you guys have any ideas?

Re: CANT PUSH CLUTCH PEDAL DOWN
 

Mike Romain of this group has had his throw out bearing wear a
notch in the input shaft sleeve, that stop it from releasing. I have had
the pressure plate come apart and a spring jam in it that wouldn't allow
it to release. I've never heard of a master cylinder jamming, just
leaking, and usually goes to the floor without releasing the clutch.
What are you driving?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

ufatbastehd wrote:
>
> So I'm driving today and go to shift nd the clutch wont budge, could
> not move it down.
> Thought I had ny foot on the brake btg mistake.
>
> So start to hobble home in first gear and as I'm driving oedal is able
> to move so I can shift, seems to stick at the top but if I feather it
> gently the pedal moves so I can shift.
>
> Did a search and mots posts indicate a master cyl issue.
> Any of you guys have any ideas?

Re: CANT PUSH CLUTCH PEDAL DOWN
 

Mike Romain of this group has had his throw out bearing wear a
notch in the input shaft sleeve, that stop it from releasing. I have had
the pressure plate come apart and a spring jam in it that wouldn't allow
it to release. I've never heard of a master cylinder jamming, just
leaking, and usually goes to the floor without releasing the clutch.
What are you driving?
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

ufatbastehd wrote:
>
> So I'm driving today and go to shift nd the clutch wont budge, could
> not move it down.
> Thought I had ny foot on the brake btg mistake.
>
> So start to hobble home in first gear and as I'm driving oedal is able
> to move so I can shift, seems to stick at the top but if I feather it
> gently the pedal moves so I can shift.
>
> Did a search and mots posts indicate a master cyl issue.
> Any of you guys have any ideas?

Re: CANT PUSH CLUTCH PEDAL DOWN
 

L.W.(Bill) ------ III wrote:
> Mike Romain of this group has had his throw out bearing wear a
> notch in the input shaft sleeve, that stop it from releasing. I have had
> the pressure plate come apart and a spring jam in it that wouldn't allow
> it to release. I've never heard of a master cylinder jamming, just
> leaking, and usually goes to the floor without releasing the clutch.
> What are you driving?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ufatbastehd wrote:
> >
> > So I'm driving today and go to shift nd the clutch wont budge, could
> > not move it down.
> > Thought I had ny foot on the brake btg mistake.
> >
> > So start to hobble home in first gear and as I'm driving oedal is able
> > to move so I can shift, seems to stick at the top but if I feather it
> > gently the pedal moves so I can shift.
> >
> > Did a search and mots posts indicate a master cyl issue.
> > Any of you guys have any ideas?



Its 1 91 YJ AX15

Re: CANT PUSH CLUTCH PEDAL DOWN
 

L.W.(Bill) ------ III wrote:
> Mike Romain of this group has had his throw out bearing wear a
> notch in the input shaft sleeve, that stop it from releasing. I have had
> the pressure plate come apart and a spring jam in it that wouldn't allow
> it to release. I've never heard of a master cylinder jamming, just
> leaking, and usually goes to the floor without releasing the clutch.
> What are you driving?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ufatbastehd wrote:
> >
> > So I'm driving today and go to shift nd the clutch wont budge, could
> > not move it down.
> > Thought I had ny foot on the brake btg mistake.
> >
> > So start to hobble home in first gear and as I'm driving oedal is able
> > to move so I can shift, seems to stick at the top but if I feather it
> > gently the pedal moves so I can shift.
> >
> > Did a search and mots posts indicate a master cyl issue.
> > Any of you guys have any ideas?



Its 1 91 YJ AX15

Re: CANT PUSH CLUTCH PEDAL DOWN
 

L.W.(Bill) ------ III wrote:
> Mike Romain of this group has had his throw out bearing wear a
> notch in the input shaft sleeve, that stop it from releasing. I have had
> the pressure plate come apart and a spring jam in it that wouldn't allow
> it to release. I've never heard of a master cylinder jamming, just
> leaking, and usually goes to the floor without releasing the clutch.
> What are you driving?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ufatbastehd wrote:
> >
> > So I'm driving today and go to shift nd the clutch wont budge, could
> > not move it down.
> > Thought I had ny foot on the brake btg mistake.
> >
> > So start to hobble home in first gear and as I'm driving oedal is able
> > to move so I can shift, seems to stick at the top but if I feather it
> > gently the pedal moves so I can shift.
> >
> > Did a search and mots posts indicate a master cyl issue.
> > Any of you guys have any ideas?



Its 1 91 YJ AX15

Re: CANT PUSH CLUTCH PEDAL DOWN
 

L.W.(Bill) ------ III wrote:
> Mike Romain of this group has had his throw out bearing wear a
> notch in the input shaft sleeve, that stop it from releasing. I have had
> the pressure plate come apart and a spring jam in it that wouldn't allow
> it to release. I've never heard of a master cylinder jamming, just
> leaking, and usually goes to the floor without releasing the clutch.
> What are you driving?
> God Bless America, Bill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> ufatbastehd wrote:
> >
> > So I'm driving today and go to shift nd the clutch wont budge, could
> > not move it down.
> > Thought I had ny foot on the brake btg mistake.
> >
> > So start to hobble home in first gear and as I'm driving oedal is able
> > to move so I can shift, seems to stick at the top but if I feather it
> > gently the pedal moves so I can shift.
> >
> > Did a search and mots posts indicate a master cyl issue.
> > Any of you guys have any ideas?



Its 1 91 YJ AX15

Re: CANT PUSH CLUTCH PEDAL DOWN
 

The retainer on the push rod in the master cylinder can pop out and the
push rod jams against firewall as happened to me once. Try lifting up on
the clutch pedal if it lifts then this is what has happened. I placed
the rod back into the master cylinder and bungied the whole thing down
to hold it in and drove home. '91 YJ also.

--
jeff

ufatbastehd wrote:
> So I'm driving today and go to shift nd the clutch wont budge, could
> not move it down.
> Thought I had ny foot on the brake btg mistake.
>
> So start to hobble home in first gear and as I'm driving oedal is able
> to move so I can shift, seems to stick at the top but if I feather it
> gently the pedal moves so I can shift.
>
> Did a search and mots posts indicate a master cyl issue.
> Any of you guys have any ideas?
>