Body lift question
Gents...
http://www.4x4xplor.com/images/BL-06.jpg I reference this picture and pose the following question: Is there any reason to think the puck cou;dn't be installed BETWEEN the metal and the rubber piece on top, which would retain the stock rubber to body contact points? lemme know, td |
Re: Body lift question
The body mounts have a steel tube in them. They sandwich the frame
mount. With the rubber above and below the frame part and the tube in the middle, it makes an up and down shock absorber. Put the puck next to the frame piece and no more shock absorber action. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Tyler Dirden wrote: > > Gents... > http://www.4x4xplor.com/images/BL-06.jpg > I reference this picture and pose the following question: > Is there any reason to think the puck cou;dn't be installed BETWEEN the > metal and the rubber piece on top, which would retain the stock rubber to > body contact points? > > lemme know, > td |
Re: Body lift question
The body mounts have a steel tube in them. They sandwich the frame
mount. With the rubber above and below the frame part and the tube in the middle, it makes an up and down shock absorber. Put the puck next to the frame piece and no more shock absorber action. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Tyler Dirden wrote: > > Gents... > http://www.4x4xplor.com/images/BL-06.jpg > I reference this picture and pose the following question: > Is there any reason to think the puck cou;dn't be installed BETWEEN the > metal and the rubber piece on top, which would retain the stock rubber to > body contact points? > > lemme know, > td |
Re: Body lift question
That's my kinda answer, Mike. Thanks.
td "Mike Romain" <romainm@sympatico.ca> wrote in message news:3F4CDDE6.E3F69643@sympatico.ca... > The body mounts have a steel tube in them. They sandwich the frame > mount. With the rubber above and below the frame part and the tube in > the middle, it makes an up and down shock absorber. > > Put the puck next to the frame piece and no more shock absorber action. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Tyler Dirden wrote: > > > > Gents... > > http://www.4x4xplor.com/images/BL-06.jpg > > I reference this picture and pose the following question: > > Is there any reason to think the puck cou;dn't be installed BETWEEN the > > metal and the rubber piece on top, which would retain the stock rubber to > > body contact points? > > > > lemme know, > > td |
Re: Body lift question
That's my kinda answer, Mike. Thanks.
td "Mike Romain" <romainm@sympatico.ca> wrote in message news:3F4CDDE6.E3F69643@sympatico.ca... > The body mounts have a steel tube in them. They sandwich the frame > mount. With the rubber above and below the frame part and the tube in > the middle, it makes an up and down shock absorber. > > Put the puck next to the frame piece and no more shock absorber action. > > Mike > 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > 88 Cherokee 235 BFG AT's > > Tyler Dirden wrote: > > > > Gents... > > http://www.4x4xplor.com/images/BL-06.jpg > > I reference this picture and pose the following question: > > Is there any reason to think the puck cou;dn't be installed BETWEEN the > > metal and the rubber piece on top, which would retain the stock rubber to > > body contact points? > > > > lemme know, > > td |
All times are GMT -4. The time now is 04:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands