Re: Bikini top into door surrounds
 

Ah. Mine wraps and velcroes around the bar. I can see the clipping into
the surrounds being a handy feature if it would work. Not that it is hard
to take the surrounds off tho, just another step like putting on the header
each time. Maybe try wetting it up real good (soak) and it might stretch?
Or maybe the surrounds need to go.

By the way this is the header bar that I use and thus have no extra holes
drilled:
<<http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2008567/c-10101/Nty-1/p-2008567/Ntx-mode+matchallpartial/N-10101/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=No-drill+Header+Windshield+Channel>>
Tomes

"Wry-mouth" <jeep@route19.com> wrote in message
news:1154694418.276670.296670@m73g2000cwd.googlegr oups.com...
> It's a Bestop with drill-in header. The sides can either be velcroed
> around the bar, or clipped into the door surrounds (like the soft top).
> I just can't get the top to stretch enough to fit the clips into both
> surrounds.
>
> Tomes wrote:
>> What bikini top do you have? Mine requires that I remove the surrounds
>> and
>> also 'bolt on' a header bar.
>> Tomes
>

Re: Bikini top into door surrounds
 

Ah. Mine wraps and velcroes around the bar. I can see the clipping into
the surrounds being a handy feature if it would work. Not that it is hard
to take the surrounds off tho, just another step like putting on the header
each time. Maybe try wetting it up real good (soak) and it might stretch?
Or maybe the surrounds need to go.

By the way this is the header bar that I use and thus have no extra holes
drilled:
<<http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2008567/c-10101/Nty-1/p-2008567/Ntx-mode+matchallpartial/N-10101/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=No-drill+Header+Windshield+Channel>>
Tomes

"Wry-mouth" <jeep@route19.com> wrote in message
news:1154694418.276670.296670@m73g2000cwd.googlegr oups.com...
> It's a Bestop with drill-in header. The sides can either be velcroed
> around the bar, or clipped into the door surrounds (like the soft top).
> I just can't get the top to stretch enough to fit the clips into both
> surrounds.
>
> Tomes wrote:
>> What bikini top do you have? Mine requires that I remove the surrounds
>> and
>> also 'bolt on' a header bar.
>> Tomes
>

Re: Bikini top into door surrounds
 

Ah. Mine wraps and velcroes around the bar. I can see the clipping into
the surrounds being a handy feature if it would work. Not that it is hard
to take the surrounds off tho, just another step like putting on the header
each time. Maybe try wetting it up real good (soak) and it might stretch?
Or maybe the surrounds need to go.

By the way this is the header bar that I use and thus have no extra holes
drilled:
<<http://www.jcwhitney.com/autoparts/Product/Pr-p_Product.CATENTRY_ID:2008567/c-10101/Nty-1/p-2008567/Ntx-mode+matchallpartial/N-10101/tf-Browse/s-10101/Ntk-AllTextSearchGroup?Ntt=No-drill+Header+Windshield+Channel>>
Tomes

"Wry-mouth" <jeep@route19.com> wrote in message
news:1154694418.276670.296670@m73g2000cwd.googlegr oups.com...
> It's a Bestop with drill-in header. The sides can either be velcroed
> around the bar, or clipped into the door surrounds (like the soft top).
> I just can't get the top to stretch enough to fit the clips into both
> surrounds.
>
> Tomes wrote:
>> What bikini top do you have? Mine requires that I remove the surrounds
>> and
>> also 'bolt on' a header bar.
>> Tomes
>