Bestop Doors???
 

Hello All,

It's been a a while since I've posted, but all is good except that my zipper
window has begun to de-track. It zips up to the first corner and then the
zipper doesn't track right causing the teeth not to align. I'm sure there
are some of you that have had this happen. I can't see any damaged teeth so
I think it's the mechanism itself. I'm tring to find a seamstress here in
the Vail area but I hope that it won't be cheaper to get a new door. It's a
bestop door.

Please send advice.

Thanks,

Paul

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.

Re: Bestop Doors???
 

I know on my soft top rear window...that if I don't get the zipper pushed in
to the zipper runner thing....that I end up stretching the zips in the
corner and it will be really hard to close.
suggest making sure you are pushing the one end all the way in to the zipper
thing before starting to zip.

Dunno if that makes sense...lol


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

I know on my soft top rear window...that if I don't get the zipper pushed in
to the zipper runner thing....that I end up stretching the zips in the
corner and it will be really hard to close.
suggest making sure you are pushing the one end all the way in to the zipper
thing before starting to zip.

Dunno if that makes sense...lol


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

I know on my soft top rear window...that if I don't get the zipper pushed in
to the zipper runner thing....that I end up stretching the zips in the
corner and it will be really hard to close.
suggest making sure you are pushing the one end all the way in to the zipper
thing before starting to zip.

Dunno if that makes sense...lol


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

Go here:

http://www.bestop.com/installation_guides/79120.pdf

Look at the last page under "care and maintenance">"zippers" for some repair
information. Maybe this well help.

*************


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
> zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
> so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
> a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

Go here:

http://www.bestop.com/installation_guides/79120.pdf

Look at the last page under "care and maintenance">"zippers" for some repair
information. Maybe this well help.

*************


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
> zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
> so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
> a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

Go here:

http://www.bestop.com/installation_guides/79120.pdf

Look at the last page under "care and maintenance">"zippers" for some repair
information. Maybe this well help.

*************


"Paul Brogren" <pibrogren@msn.com> wrote in message
news:2r9725F182rf7U1@uni-berlin.de...
> Hello All,
>
> It's been a a while since I've posted, but all is good except that my
> zipper
> window has begun to de-track. It zips up to the first corner and then the
> zipper doesn't track right causing the teeth not to align. I'm sure there
> are some of you that have had this happen. I can't see any damaged teeth
> so
> I think it's the mechanism itself. I'm tring to find a seamstress here in
> the Vail area but I hope that it won't be cheaper to get a new door. It's
> a
> bestop door.
>
> Please send advice.
>
> Thanks,
>
> Paul
>
> --
> Thanks Always !!!
> Paul '75 CJ5 258
> Vail, CO.
>
>

Re: Bestop Doors???
 

Thanks Guys,

I tried the plier adjustments that were posted on the Bestop page. They
worked a little, but I can see where the zipper "slider" itself is stress
cracked and won't pinch the zipper together.

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
"Davenport" <davenport@centurytel.net> wrote in message
news:QMadnaamFNl4FNLcRVn-uw@centurytel.net...
> Go here:
>
> http://www.bestop.com/installation_guides/79120.pdf
>
> Look at the last page under "care and maintenance">"zippers" for some
repair
> information. Maybe this well help.
>
> *************
>
>
> "Paul Brogren" <pibrogren@msn.com> wrote in message
> news:2r9725F182rf7U1@uni-berlin.de...
> > Hello All,
> >
> > It's been a a while since I've posted, but all is good except that my
> > zipper
> > window has begun to de-track. It zips up to the first corner and then
the
> > zipper doesn't track right causing the teeth not to align. I'm sure
there
> > are some of you that have had this happen. I can't see any damaged
teeth
> > so
> > I think it's the mechanism itself. I'm tring to find a seamstress here
in
> > the Vail area but I hope that it won't be cheaper to get a new door.
It's
> > a
> > bestop door.
> >
> > Please send advice.
> >
> > Thanks,
> >
> > Paul
> >
> > --
> > Thanks Always !!!
> > Paul '75 CJ5 258
> > Vail, CO.
> >
> >
>
>

Re: Bestop Doors???
 

Thanks Guys,

I tried the plier adjustments that were posted on the Bestop page. They
worked a little, but I can see where the zipper "slider" itself is stress
cracked and won't pinch the zipper together.

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
"Davenport" <davenport@centurytel.net> wrote in message
news:QMadnaamFNl4FNLcRVn-uw@centurytel.net...
> Go here:
>
> http://www.bestop.com/installation_guides/79120.pdf
>
> Look at the last page under "care and maintenance">"zippers" for some
repair
> information. Maybe this well help.
>
> *************
>
>
> "Paul Brogren" <pibrogren@msn.com> wrote in message
> news:2r9725F182rf7U1@uni-berlin.de...
> > Hello All,
> >
> > It's been a a while since I've posted, but all is good except that my
> > zipper
> > window has begun to de-track. It zips up to the first corner and then
the
> > zipper doesn't track right causing the teeth not to align. I'm sure
there
> > are some of you that have had this happen. I can't see any damaged
teeth
> > so
> > I think it's the mechanism itself. I'm tring to find a seamstress here
in
> > the Vail area but I hope that it won't be cheaper to get a new door.
It's
> > a
> > bestop door.
> >
> > Please send advice.
> >
> > Thanks,
> >
> > Paul
> >
> > --
> > Thanks Always !!!
> > Paul '75 CJ5 258
> > Vail, CO.
> >
> >
>
>

Re: Bestop Doors???
 

Thanks Guys,

I tried the plier adjustments that were posted on the Bestop page. They
worked a little, but I can see where the zipper "slider" itself is stress
cracked and won't pinch the zipper together.

--
Thanks Always !!!
Paul '75 CJ5 258
Vail, CO.
"Davenport" <davenport@centurytel.net> wrote in message
news:QMadnaamFNl4FNLcRVn-uw@centurytel.net...
> Go here:
>
> http://www.bestop.com/installation_guides/79120.pdf
>
> Look at the last page under "care and maintenance">"zippers" for some
repair
> information. Maybe this well help.
>
> *************
>
>
> "Paul Brogren" <pibrogren@msn.com> wrote in message
> news:2r9725F182rf7U1@uni-berlin.de...
> > Hello All,
> >
> > It's been a a while since I've posted, but all is good except that my
> > zipper
> > window has begun to de-track. It zips up to the first corner and then
the
> > zipper doesn't track right causing the teeth not to align. I'm sure
there
> > are some of you that have had this happen. I can't see any damaged
teeth
> > so
> > I think it's the mechanism itself. I'm tring to find a seamstress here
in
> > the Vail area but I hope that it won't be cheaper to get a new door.
It's
> > a
> > bestop door.
> >
> > Please send advice.
> >
> > Thanks,
> >
> > Paul
> >
> > --
> > Thanks Always !!!
> > Paul '75 CJ5 258
> > Vail, CO.
> >
> >
>
>