Ball Joint differences in Spicer/Dana axle Question.
 

I picked up a new lower ball joint today and went with the heavy duty
one that still had a grease nipple.

They also have a light duty one listed.

I was reading the directions and it says for a typical Spicer 44 front
end. Well, I have a 30, not a 44.

Does anyone know if they are the same part or do I need to go get the
other one?

I am eyeballing them and the deck on the new one appears thicker, I
don't think it will fit.

Thanks.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's
Canadian Off Road Trips Photos: Non members can still view!
Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
(More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I think not, at least take a trip to the store and compare.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I think not, at least take a trip to the store and compare.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I think not, at least take a trip to the store and compare.
God Bless America, Bill O|||||||O
mailto:-------------------- http://www.----------.com/

Mike Romain wrote:
>
> I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I replaced mine with all my other front end parts a couple months ago,
think I still have the box end and part # if you want it, from napa, had the
grease nipple.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:44AC2DEE.28660D0A@sympatico.ca...
>I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I replaced mine with all my other front end parts a couple months ago,
think I still have the box end and part # if you want it, from napa, had the
grease nipple.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:44AC2DEE.28660D0A@sympatico.ca...
>I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

I replaced mine with all my other front end parts a couple months ago,
think I still have the box end and part # if you want it, from napa, had the
grease nipple.

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:44AC2DEE.28660D0A@sympatico.ca...
>I picked up a new lower ball joint today and went with the heavy duty
> one that still had a grease nipple.
>
> They also have a light duty one listed.
>
> I was reading the directions and it says for a typical Spicer 44 front
> end. Well, I have a 30, not a 44.
>
> Does anyone know if they are the same part or do I need to go get the
> other one?
>
> I am eyeballing them and the deck on the new one appears thicker, I
> don't think it will fit.
>
> Thanks.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
> Canadian Off Road Trips Photos: Non members can still view!
> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
> (More Off Road album links at bottom of the view page)

Re: Ball Joint differences in Spicer/Dana axle Question.
 

Napa #s are 260-1342 and 260-1343, 81 CJ7 dana 30 upper and lower, not
sure which is which though.

"Greg" <greglc84@hotmail.com> wrote in message
news:yXZqg.126221$Mn5.12833@pd7tw3no...
> I replaced mine with all my other front end parts a couple months ago,
> think I still have the box end and part # if you want it, from napa, had
> the grease nipple.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44AC2DEE.28660D0A@sympatico.ca...
>>I picked up a new lower ball joint today and went with the heavy duty
>> one that still had a grease nipple.
>>
>> They also have a light duty one listed.
>>
>> I was reading the directions and it says for a typical Spicer 44 front
>> end. Well, I have a 30, not a 44.
>>
>> Does anyone know if they are the same part or do I need to go get the
>> other one?
>>
>> I am eyeballing them and the deck on the new one appears thicker, I
>> don't think it will fit.
>>
>> Thanks.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>

Re: Ball Joint differences in Spicer/Dana axle Question.
 

Napa #s are 260-1342 and 260-1343, 81 CJ7 dana 30 upper and lower, not
sure which is which though.

"Greg" <greglc84@hotmail.com> wrote in message
news:yXZqg.126221$Mn5.12833@pd7tw3no...
> I replaced mine with all my other front end parts a couple months ago,
> think I still have the box end and part # if you want it, from napa, had
> the grease nipple.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44AC2DEE.28660D0A@sympatico.ca...
>>I picked up a new lower ball joint today and went with the heavy duty
>> one that still had a grease nipple.
>>
>> They also have a light duty one listed.
>>
>> I was reading the directions and it says for a typical Spicer 44 front
>> end. Well, I have a 30, not a 44.
>>
>> Does anyone know if they are the same part or do I need to go get the
>> other one?
>>
>> I am eyeballing them and the deck on the new one appears thicker, I
>> don't think it will fit.
>>
>> Thanks.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>

Re: Ball Joint differences in Spicer/Dana axle Question.
 

Napa #s are 260-1342 and 260-1343, 81 CJ7 dana 30 upper and lower, not
sure which is which though.

"Greg" <greglc84@hotmail.com> wrote in message
news:yXZqg.126221$Mn5.12833@pd7tw3no...
> I replaced mine with all my other front end parts a couple months ago,
> think I still have the box end and part # if you want it, from napa, had
> the grease nipple.
>
> "Mike Romain" <romainm@sympatico.ca> wrote in message
> news:44AC2DEE.28660D0A@sympatico.ca...
>>I picked up a new lower ball joint today and went with the heavy duty
>> one that still had a grease nipple.
>>
>> They also have a light duty one listed.
>>
>> I was reading the directions and it says for a typical Spicer 44 front
>> end. Well, I have a 30, not a 44.
>>
>> Does anyone know if they are the same part or do I need to go get the
>> other one?
>>
>> I am eyeballing them and the deck on the new one appears thicker, I
>> don't think it will fit.
>>
>> Thanks.
>>
>> Mike
>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
>> 88 Cherokee 235 BFG AT's
>> Canadian Off Road Trips Photos: Non members can still view!
>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590
>> (More Off Road album links at bottom of the view page)
>
>