Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   AX5 Syncos (https://www.jeepscanada.com/jeep-mailing-list-32/ax5-syncos-20832/)

Ben 09-28-2004 02:10 PM

AX5 Syncos
 
Well.. My synchros are going.. I have problems shifting into 4th gear.. I
can shift into all the rest just fine.. I know I can double clutch and get
into gear but that is getting old.. I am thinking of getting a new/good used
Tranny.. Like an NV4500.. I was thinking if I get that tranny... I can then
later upgrade to a 4.0L or whatever later.. From what I have seen at Advance
Adapter, I can get adapters for almost any engine... I would rather get an
NV4500 then invest in another AX5... What do you think? Good idea, bad idea,
in different...

Thanks,

Ben
95 YJ 2.5L




L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 09-28-2004 04:16 PM

Re: AX5 Syncos
 
Hi Ben,
I think you should make the switch with a bigger engine at the same
time. The big problem is no one thinks enough of the little four banger
to make a clutch disk bigger than nine inches for it, and those disks
don't make the centers big enough, nor the spline count for say an
NV4500: http://www.----------.com/YJclutch.jpg I see someone thought
enough to bolt a fifties Chevy Muncie with the granny to it:
http://www.jeeptech.com/convtrans/sm420yj/ using a clutch disk from an
'83 four.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ben wrote:
>
> Well.. My synchros are going.. I have problems shifting into 4th gear.. I
> can shift into all the rest just fine.. I know I can double clutch and get
> into gear but that is getting old.. I am thinking of getting a new/good used
> Tranny.. Like an NV4500.. I was thinking if I get that tranny... I can then
> later upgrade to a 4.0L or whatever later.. From what I have seen at Advance
> Adapter, I can get adapters for almost any engine... I would rather get an
> NV4500 then invest in another AX5... What do you think? Good idea, bad idea,
> in different...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 09-28-2004 04:16 PM

Re: AX5 Syncos
 
Hi Ben,
I think you should make the switch with a bigger engine at the same
time. The big problem is no one thinks enough of the little four banger
to make a clutch disk bigger than nine inches for it, and those disks
don't make the centers big enough, nor the spline count for say an
NV4500: http://www.----------.com/YJclutch.jpg I see someone thought
enough to bolt a fifties Chevy Muncie with the granny to it:
http://www.jeeptech.com/convtrans/sm420yj/ using a clutch disk from an
'83 four.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ben wrote:
>
> Well.. My synchros are going.. I have problems shifting into 4th gear.. I
> can shift into all the rest just fine.. I know I can double clutch and get
> into gear but that is getting old.. I am thinking of getting a new/good used
> Tranny.. Like an NV4500.. I was thinking if I get that tranny... I can then
> later upgrade to a 4.0L or whatever later.. From what I have seen at Advance
> Adapter, I can get adapters for almost any engine... I would rather get an
> NV4500 then invest in another AX5... What do you think? Good idea, bad idea,
> in different...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 09-28-2004 04:16 PM

Re: AX5 Syncos
 
Hi Ben,
I think you should make the switch with a bigger engine at the same
time. The big problem is no one thinks enough of the little four banger
to make a clutch disk bigger than nine inches for it, and those disks
don't make the centers big enough, nor the spline count for say an
NV4500: http://www.----------.com/YJclutch.jpg I see someone thought
enough to bolt a fifties Chevy Muncie with the granny to it:
http://www.jeeptech.com/convtrans/sm420yj/ using a clutch disk from an
'83 four.
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

Ben wrote:
>
> Well.. My synchros are going.. I have problems shifting into 4th gear.. I
> can shift into all the rest just fine.. I know I can double clutch and get
> into gear but that is getting old.. I am thinking of getting a new/good used
> Tranny.. Like an NV4500.. I was thinking if I get that tranny... I can then
> later upgrade to a 4.0L or whatever later.. From what I have seen at Advance
> Adapter, I can get adapters for almost any engine... I would rather get an
> NV4500 then invest in another AX5... What do you think? Good idea, bad idea,
> in different...
>
> Thanks,
>
> Ben
> 95 YJ 2.5L



All times are GMT -4. The time now is 02:49 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.03471 seconds with 5 queries