Re: AX15 Transmission Repair
Input and output shaft bearings....
Nick -- http://members.cox.net/nnote/ "Dave" <dmcglynn@gmail.com> wrote in message news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? > |
Re: AX15 Transmission Repair
Input and output shaft bearings....
Nick -- http://members.cox.net/nnote/ "Dave" <dmcglynn@gmail.com> wrote in message news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? > |
Re: AX15 Transmission Repair
Input and output shaft bearings....
Nick -- http://members.cox.net/nnote/ "Dave" <dmcglynn@gmail.com> wrote in message news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? > |
Re: AX15 Transmission Repair
With both seals....
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Nick wrote: > > Input and output shaft bearings.... > Nick > > -- > http://members.cox.net/nnote/ > "Dave" <dmcglynn@gmail.com> wrote in message > news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > > I'm going to be taking the trans out tonight, and I plan on replacing > > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > > I've got everything taken apart. .. A question to those who have been > > here before me ... Is there anything else that is a good idea to > > replace / inspect while I've got the transmission out? > > |
Re: AX15 Transmission Repair
With both seals....
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Nick wrote: > > Input and output shaft bearings.... > Nick > > -- > http://members.cox.net/nnote/ > "Dave" <dmcglynn@gmail.com> wrote in message > news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > > I'm going to be taking the trans out tonight, and I plan on replacing > > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > > I've got everything taken apart. .. A question to those who have been > > here before me ... Is there anything else that is a good idea to > > replace / inspect while I've got the transmission out? > > |
Re: AX15 Transmission Repair
With both seals....
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Nick wrote: > > Input and output shaft bearings.... > Nick > > -- > http://members.cox.net/nnote/ > "Dave" <dmcglynn@gmail.com> wrote in message > news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > > I'm going to be taking the trans out tonight, and I plan on replacing > > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > > I've got everything taken apart. .. A question to those who have been > > here before me ... Is there anything else that is a good idea to > > replace / inspect while I've got the transmission out? > > |
Re: AX15 Transmission Repair
With both seals....
Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Nick wrote: > > Input and output shaft bearings.... > Nick > > -- > http://members.cox.net/nnote/ > "Dave" <dmcglynn@gmail.com> wrote in message > news:1116934488.995948.281180@g43g2000cwa.googlegr oups.com... > > I'm going to be taking the trans out tonight, and I plan on replacing > > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > > I've got everything taken apart. .. A question to those who have been > > here before me ... Is there anything else that is a good idea to > > replace / inspect while I've got the transmission out? > > |
Re: AX15 Transmission Repair
Like Nick mentioned, I would do the tranny end bearings and both seals
as well I would (did on mine) pull out that stooopid button vent and add a piece of steel gas line in the hole to make a nipple for a real high water vent line that runs up by the battery with the one for the T-case. I think when you look, you will find oil on the back of the engine from the valve cover imitating that 'rear main leak'. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Dave wrote: > > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? |
Re: AX15 Transmission Repair
Like Nick mentioned, I would do the tranny end bearings and both seals
as well I would (did on mine) pull out that stooopid button vent and add a piece of steel gas line in the hole to make a nipple for a real high water vent line that runs up by the battery with the one for the T-case. I think when you look, you will find oil on the back of the engine from the valve cover imitating that 'rear main leak'. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Dave wrote: > > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? |
Re: AX15 Transmission Repair
Like Nick mentioned, I would do the tranny end bearings and both seals
as well I would (did on mine) pull out that stooopid button vent and add a piece of steel gas line in the hole to make a nipple for a real high water vent line that runs up by the battery with the one for the T-case. I think when you look, you will find oil on the back of the engine from the valve cover imitating that 'rear main leak'. Mike 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 88 Cherokee 235 BFG AT's Dave wrote: > > I'm going to be taking the trans out tonight, and I plan on replacing > my clutch-plate (why not) & rear-main seal (has a sliiiight leak) while > I've got everything taken apart. .. A question to those who have been > here before me ... Is there anything else that is a good idea to > replace / inspect while I've got the transmission out? |
All times are GMT -4. The time now is 10:13 AM. |
© 2024 MH Sub I, LLC dba Internet Brands