Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon. "Mike Romain" <romainm@sympatico.ca> wrote in message news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com... >I haven't had 'any' income since last August so am looking for a cheap used >one to get me by. > > As mentioned, I can get mine rebuilt with grease fittings on the joints > for a couple hundred. > > Mike > > Anthony T wrote: >> Mike, >> I replaced my factory steering shaft with a Borgeson. They're pricey >> ($240) but it was a very noticeable improvement. I thought my steering >> box was going bad because the steering was all over the place. Just by >> chance, I replaced my steering shaft with a borgeson shaft and the Jeep >> drives straight as an arrow now. I dont work for Borgeson, but I can >> tell you from experience, it's a great product...and great customer >> service. my two cents. >> >> http://www.borgeson.com/TruckProductJeep.htm >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com... >>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at >>> the lower u-joint and needs to get replaced. >>> >>> I can get it rebuilt locally with greasable u-joints for about $175.00 I >>> think it is, but really don't have the cash right now. >>> >>> Anyone in Canada or close to Ontario Canada have a used one that isn't >>> totally shot they would part with reasonably? >>> >>> I'll trade an old 88 Cherokee for a new one. :-) >>> >>> Thanks, >>> >>> Mike >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >>> Canadian Off Road Trips Photos: Non members can still view! >>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>> (More Off Road album links at bottom of the view page) >> |
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon. "Mike Romain" <romainm@sympatico.ca> wrote in message news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com... >I haven't had 'any' income since last August so am looking for a cheap used >one to get me by. > > As mentioned, I can get mine rebuilt with grease fittings on the joints > for a couple hundred. > > Mike > > Anthony T wrote: >> Mike, >> I replaced my factory steering shaft with a Borgeson. They're pricey >> ($240) but it was a very noticeable improvement. I thought my steering >> box was going bad because the steering was all over the place. Just by >> chance, I replaced my steering shaft with a borgeson shaft and the Jeep >> drives straight as an arrow now. I dont work for Borgeson, but I can >> tell you from experience, it's a great product...and great customer >> service. my two cents. >> >> http://www.borgeson.com/TruckProductJeep.htm >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com... >>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at >>> the lower u-joint and needs to get replaced. >>> >>> I can get it rebuilt locally with greasable u-joints for about $175.00 I >>> think it is, but really don't have the cash right now. >>> >>> Anyone in Canada or close to Ontario Canada have a used one that isn't >>> totally shot they would part with reasonably? >>> >>> I'll trade an old 88 Cherokee for a new one. :-) >>> >>> Thanks, >>> >>> Mike >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >>> Canadian Off Road Trips Photos: Non members can still view! >>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>> (More Off Road album links at bottom of the view page) >> |
Re: Anyone got a CJ7 Steering shaft?
Sorry Mike,
I understand. I hope you get some income soon. "Mike Romain" <romainm@sympatico.ca> wrote in message news:466ab394$0$18858$9a6e19ea@unlimited.newshosti ng.com... >I haven't had 'any' income since last August so am looking for a cheap used >one to get me by. > > As mentioned, I can get mine rebuilt with grease fittings on the joints > for a couple hundred. > > Mike > > Anthony T wrote: >> Mike, >> I replaced my factory steering shaft with a Borgeson. They're pricey >> ($240) but it was a very noticeable improvement. I thought my steering >> box was going bad because the steering was all over the place. Just by >> chance, I replaced my steering shaft with a borgeson shaft and the Jeep >> drives straight as an arrow now. I dont work for Borgeson, but I can >> tell you from experience, it's a great product...and great customer >> service. my two cents. >> >> http://www.borgeson.com/TruckProductJeep.htm >> >> >> "Mike Romain" <romainm@sympatico.ca> wrote in message >> news:46686675$0$20745$9a6e19ea@unlimited.newshosti ng.com... >>> My under hood steering shaft on my 86 CJ7 is getting really sloppy at >>> the lower u-joint and needs to get replaced. >>> >>> I can get it rebuilt locally with greasable u-joints for about $175.00 I >>> think it is, but really don't have the cash right now. >>> >>> Anyone in Canada or close to Ontario Canada have a used one that isn't >>> totally shot they would part with reasonably? >>> >>> I'll trade an old 88 Cherokee for a new one. :-) >>> >>> Thanks, >>> >>> Mike >>> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>> 88 Cherokee 235 BFG AT's - Gone to the rust pile... >>> Canadian Off Road Trips Photos: Non members can still view! >>> Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>> (More Off Road album links at bottom of the view page) >> |
All times are GMT -4. The time now is 11:45 PM. |
© 2024 MH Sub I, LLC dba Internet Brands