Re: adding snaps to a soft top...
How do you feel about these: <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the installation tool to install snaps into top fabric (1 punch and 1 die)." Mike Romain wrote: > Stock, the later CJ's used a Witco top that snapped down all around the > edges and at the windshield corner. I still have one. Last time I > looked which was 5 years ago, my local $tealer had snaps or could order > them easily. The snaps are a 'standard' size which is why aftermarket > generic ones work, but the quality of the components varies radically. > > Mike > > Steve G wrote: > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean >>exactly? >> >>"Mike Romain" <romainm@sympatico.ca> wrote in message >>news:43C3C845.24C0CA6E@sympatico.ca... >> >>>I highly recommend you spend the overinflated prices at the $tealership >>>for them. I have not been able to find aftermarket snaps that are any >>>good at all. The rot/rust out really fast. Nothing worse than putting >>>a nice fiberglass body on only to have rust streaks from every freakin' >>>snap. >>> >>>Mike >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>>88 Cherokee 235 BFG AT's >>>Canadian Off Road Trips Photos: Non members can still view! >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>>(More Off Road album links at bottom of the view page) >>> >>>Steve G wrote: >>> >>>>Should this be anything to do myself or take to a upholstery shop? just >>>>wanna put a couple over each door on my cj5 to keep material from pulling >>>>off of velcro. |
Re: adding snaps to a soft top...
I think there are too many pieces for the price, therefore the quality
is suspect in my mind. The kits I found were cheap like that. The $tealer wanted something like $2.00 each and the upholstery places about a buck each. Mike Lee Ayrton wrote: > > How do you feel about these: > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > installation tool to install snaps into top fabric (1 punch and 1 die)." > > Mike Romain wrote: > > Stock, the later CJ's used a Witco top that snapped down all around the > > edges and at the windshield corner. I still have one. Last time I > > looked which was 5 years ago, my local $tealer had snaps or could order > > them easily. The snaps are a 'standard' size which is why aftermarket > > generic ones work, but the quality of the components varies radically. > > > > Mike > > > > Steve G wrote: > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > >>exactly? > >> > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > >>news:43C3C845.24C0CA6E@sympatico.ca... > >> > >>>I highly recommend you spend the overinflated prices at the $tealership > >>>for them. I have not been able to find aftermarket snaps that are any > >>>good at all. The rot/rust out really fast. Nothing worse than putting > >>>a nice fiberglass body on only to have rust streaks from every freakin' > >>>snap. > >>> > >>>Mike > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >>>88 Cherokee 235 BFG AT's > >>>Canadian Off Road Trips Photos: Non members can still view! > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >>>(More Off Road album links at bottom of the view page) > >>> > >>>Steve G wrote: > >>> > >>>>Should this be anything to do myself or take to a upholstery shop? just > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > >>>>off of velcro. |
Re: adding snaps to a soft top...
I think there are too many pieces for the price, therefore the quality
is suspect in my mind. The kits I found were cheap like that. The $tealer wanted something like $2.00 each and the upholstery places about a buck each. Mike Lee Ayrton wrote: > > How do you feel about these: > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > installation tool to install snaps into top fabric (1 punch and 1 die)." > > Mike Romain wrote: > > Stock, the later CJ's used a Witco top that snapped down all around the > > edges and at the windshield corner. I still have one. Last time I > > looked which was 5 years ago, my local $tealer had snaps or could order > > them easily. The snaps are a 'standard' size which is why aftermarket > > generic ones work, but the quality of the components varies radically. > > > > Mike > > > > Steve G wrote: > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > >>exactly? > >> > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > >>news:43C3C845.24C0CA6E@sympatico.ca... > >> > >>>I highly recommend you spend the overinflated prices at the $tealership > >>>for them. I have not been able to find aftermarket snaps that are any > >>>good at all. The rot/rust out really fast. Nothing worse than putting > >>>a nice fiberglass body on only to have rust streaks from every freakin' > >>>snap. > >>> > >>>Mike > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >>>88 Cherokee 235 BFG AT's > >>>Canadian Off Road Trips Photos: Non members can still view! > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >>>(More Off Road album links at bottom of the view page) > >>> > >>>Steve G wrote: > >>> > >>>>Should this be anything to do myself or take to a upholstery shop? just > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > >>>>off of velcro. |
Re: adding snaps to a soft top...
I think there are too many pieces for the price, therefore the quality
is suspect in my mind. The kits I found were cheap like that. The $tealer wanted something like $2.00 each and the upholstery places about a buck each. Mike Lee Ayrton wrote: > > How do you feel about these: > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > installation tool to install snaps into top fabric (1 punch and 1 die)." > > Mike Romain wrote: > > Stock, the later CJ's used a Witco top that snapped down all around the > > edges and at the windshield corner. I still have one. Last time I > > looked which was 5 years ago, my local $tealer had snaps or could order > > them easily. The snaps are a 'standard' size which is why aftermarket > > generic ones work, but the quality of the components varies radically. > > > > Mike > > > > Steve G wrote: > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > >>exactly? > >> > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > >>news:43C3C845.24C0CA6E@sympatico.ca... > >> > >>>I highly recommend you spend the overinflated prices at the $tealership > >>>for them. I have not been able to find aftermarket snaps that are any > >>>good at all. The rot/rust out really fast. Nothing worse than putting > >>>a nice fiberglass body on only to have rust streaks from every freakin' > >>>snap. > >>> > >>>Mike > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > >>>88 Cherokee 235 BFG AT's > >>>Canadian Off Road Trips Photos: Non members can still view! > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > >>>(More Off Road album links at bottom of the view page) > >>> > >>>Steve G wrote: > >>> > >>>>Should this be anything to do myself or take to a upholstery shop? just > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > >>>>off of velcro. |
Re: adding snaps to a soft top...
Another problem with the 4wd.com kit is that it doesn't at least *say*
"stainless" or "brass" anywhere. I think that if you were getting stainless and brass, the vendor would at least take the trouble to brag about it. Earle "Mike Romain" <romainm@sympatico.ca> wrote in message news:43C68EBB.CA5D09C3@sympatico.ca... > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > > > > How do you feel about these: > > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > > installation tool to install snaps into top fabric (1 punch and 1 die)." > > > > Mike Romain wrote: > > > Stock, the later CJ's used a Witco top that snapped down all around the > > > edges and at the windshield corner. I still have one. Last time I > > > looked which was 5 years ago, my local $tealer had snaps or could order > > > them easily. The snaps are a 'standard' size which is why aftermarket > > > generic ones work, but the quality of the components varies radically. > > > > > > Mike > > > > > > Steve G wrote: > > > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > > >>exactly? > > >> > > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > > >>news:43C3C845.24C0CA6E@sympatico.ca... > > >> > > >>>I highly recommend you spend the overinflated prices at the $tealership > > >>>for them. I have not been able to find aftermarket snaps that are any > > >>>good at all. The rot/rust out really fast. Nothing worse than putting > > >>>a nice fiberglass body on only to have rust streaks from every freakin' > > >>>snap. > > >>> > > >>>Mike > > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > >>>88 Cherokee 235 BFG AT's > > >>>Canadian Off Road Trips Photos: Non members can still view! > > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > >>>(More Off Road album links at bottom of the view page) > > >>> > > >>>Steve G wrote: > > >>> > > >>>>Should this be anything to do myself or take to a upholstery shop? just > > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > > >>>>off of velcro. |
Re: adding snaps to a soft top...
Another problem with the 4wd.com kit is that it doesn't at least *say*
"stainless" or "brass" anywhere. I think that if you were getting stainless and brass, the vendor would at least take the trouble to brag about it. Earle "Mike Romain" <romainm@sympatico.ca> wrote in message news:43C68EBB.CA5D09C3@sympatico.ca... > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > > > > How do you feel about these: > > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > > installation tool to install snaps into top fabric (1 punch and 1 die)." > > > > Mike Romain wrote: > > > Stock, the later CJ's used a Witco top that snapped down all around the > > > edges and at the windshield corner. I still have one. Last time I > > > looked which was 5 years ago, my local $tealer had snaps or could order > > > them easily. The snaps are a 'standard' size which is why aftermarket > > > generic ones work, but the quality of the components varies radically. > > > > > > Mike > > > > > > Steve G wrote: > > > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > > >>exactly? > > >> > > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > > >>news:43C3C845.24C0CA6E@sympatico.ca... > > >> > > >>>I highly recommend you spend the overinflated prices at the $tealership > > >>>for them. I have not been able to find aftermarket snaps that are any > > >>>good at all. The rot/rust out really fast. Nothing worse than putting > > >>>a nice fiberglass body on only to have rust streaks from every freakin' > > >>>snap. > > >>> > > >>>Mike > > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > >>>88 Cherokee 235 BFG AT's > > >>>Canadian Off Road Trips Photos: Non members can still view! > > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > >>>(More Off Road album links at bottom of the view page) > > >>> > > >>>Steve G wrote: > > >>> > > >>>>Should this be anything to do myself or take to a upholstery shop? just > > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > > >>>>off of velcro. |
Re: adding snaps to a soft top...
Another problem with the 4wd.com kit is that it doesn't at least *say*
"stainless" or "brass" anywhere. I think that if you were getting stainless and brass, the vendor would at least take the trouble to brag about it. Earle "Mike Romain" <romainm@sympatico.ca> wrote in message news:43C68EBB.CA5D09C3@sympatico.ca... > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > > > > How do you feel about these: > > <URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> > > > > Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 > > sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the > > installation tool to install snaps into top fabric (1 punch and 1 die)." > > > > Mike Romain wrote: > > > Stock, the later CJ's used a Witco top that snapped down all around the > > > edges and at the windshield corner. I still have one. Last time I > > > looked which was 5 years ago, my local $tealer had snaps or could order > > > them easily. The snaps are a 'standard' size which is why aftermarket > > > generic ones work, but the quality of the components varies radically. > > > > > > Mike > > > > > > Steve G wrote: > > > > > >>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean > > >>exactly? > > >> > > >>"Mike Romain" <romainm@sympatico.ca> wrote in message > > >>news:43C3C845.24C0CA6E@sympatico.ca... > > >> > > >>>I highly recommend you spend the overinflated prices at the $tealership > > >>>for them. I have not been able to find aftermarket snaps that are any > > >>>good at all. The rot/rust out really fast. Nothing worse than putting > > >>>a nice fiberglass body on only to have rust streaks from every freakin' > > >>>snap. > > >>> > > >>>Mike > > >>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 > > >>>88 Cherokee 235 BFG AT's > > >>>Canadian Off Road Trips Photos: Non members can still view! > > >>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 > > >>>(More Off Road album links at bottom of the view page) > > >>> > > >>>Steve G wrote: > > >>> > > >>>>Should this be anything to do myself or take to a upholstery shop? just > > >>>>wanna put a couple over each door on my cj5 to keep material from pulling > > >>>>off of velcro. |
Re: adding snaps to a soft top...
Go to a boating supply store, they have better quality snaps because
boats are exposed to weather more. If you live near the ocean and go to a marine boating supply store, the odds are even better that they have a stainless version. Mike Romain wrote: > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > >>How do you feel about these: >><URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> >> >>Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 >>sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the >>installation tool to install snaps into top fabric (1 punch and 1 die)." >> >>Mike Romain wrote: >> >>>Stock, the later CJ's used a Witco top that snapped down all around the >>>edges and at the windshield corner. I still have one. Last time I >>>looked which was 5 years ago, my local $tealer had snaps or could order >>>them easily. The snaps are a 'standard' size which is why aftermarket >>>generic ones work, but the quality of the components varies radically. >>> >>>Mike >>> >>>Steve G wrote: >>> >>> >>>>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean >>>>exactly? >>>> >>>>"Mike Romain" <romainm@sympatico.ca> wrote in message >>>>news:43C3C845.24C0CA6E@sympatico.ca... >>>> >>>> >>>>>I highly recommend you spend the overinflated prices at the $tealership >>>>>for them. I have not been able to find aftermarket snaps that are any >>>>>good at all. The rot/rust out really fast. Nothing worse than putting >>>>>a nice fiberglass body on only to have rust streaks from every freakin' >>>>>snap. >>>>> >>>>>Mike >>>>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>>>>88 Cherokee 235 BFG AT's >>>>>Canadian Off Road Trips Photos: Non members can still view! >>>>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>>>>(More Off Road album links at bottom of the view page) >>>>> >>>>>Steve G wrote: >>>>> >>>>> >>>>>>Should this be anything to do myself or take to a upholstery shop? just >>>>>>wanna put a couple over each door on my cj5 to keep material from pulling >>>>>>off of velcro. -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: adding snaps to a soft top...
Go to a boating supply store, they have better quality snaps because
boats are exposed to weather more. If you live near the ocean and go to a marine boating supply store, the odds are even better that they have a stainless version. Mike Romain wrote: > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > >>How do you feel about these: >><URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> >> >>Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 >>sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the >>installation tool to install snaps into top fabric (1 punch and 1 die)." >> >>Mike Romain wrote: >> >>>Stock, the later CJ's used a Witco top that snapped down all around the >>>edges and at the windshield corner. I still have one. Last time I >>>looked which was 5 years ago, my local $tealer had snaps or could order >>>them easily. The snaps are a 'standard' size which is why aftermarket >>>generic ones work, but the quality of the components varies radically. >>> >>>Mike >>> >>>Steve G wrote: >>> >>> >>>>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean >>>>exactly? >>>> >>>>"Mike Romain" <romainm@sympatico.ca> wrote in message >>>>news:43C3C845.24C0CA6E@sympatico.ca... >>>> >>>> >>>>>I highly recommend you spend the overinflated prices at the $tealership >>>>>for them. I have not been able to find aftermarket snaps that are any >>>>>good at all. The rot/rust out really fast. Nothing worse than putting >>>>>a nice fiberglass body on only to have rust streaks from every freakin' >>>>>snap. >>>>> >>>>>Mike >>>>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>>>>88 Cherokee 235 BFG AT's >>>>>Canadian Off Road Trips Photos: Non members can still view! >>>>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>>>>(More Off Road album links at bottom of the view page) >>>>> >>>>>Steve G wrote: >>>>> >>>>> >>>>>>Should this be anything to do myself or take to a upholstery shop? just >>>>>>wanna put a couple over each door on my cj5 to keep material from pulling >>>>>>off of velcro. -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: adding snaps to a soft top...
Go to a boating supply store, they have better quality snaps because
boats are exposed to weather more. If you live near the ocean and go to a marine boating supply store, the odds are even better that they have a stainless version. Mike Romain wrote: > I think there are too many pieces for the price, therefore the quality > is suspect in my mind. > > The kits I found were cheap like that. The $tealer wanted something > like $2.00 each and the upholstery places about a buck each. > > Mike > > Lee Ayrton wrote: > >>How do you feel about these: >><URL:http://www.4wd.com/newsite/shop/productdetail.asp?model=tj&pid=93002> >> >>Snap replacement kit, CJ, #93002, $19.95 "Kit includes: 30 buttons, 30 >>sockets, 5 fabric studs, 5 eyelets, 30 body studs and 30 screws and the >>installation tool to install snaps into top fabric (1 punch and 1 die)." >> >>Mike Romain wrote: >> >>>Stock, the later CJ's used a Witco top that snapped down all around the >>>edges and at the windshield corner. I still have one. Last time I >>>looked which was 5 years ago, my local $tealer had snaps or could order >>>them easily. The snaps are a 'standard' size which is why aftermarket >>>generic ones work, but the quality of the components varies radically. >>> >>>Mike >>> >>>Steve G wrote: >>> >>> >>>>Stealership has snaps for a CJ5 Supertop from Bestop? Where do you mean >>>>exactly? >>>> >>>>"Mike Romain" <romainm@sympatico.ca> wrote in message >>>>news:43C3C845.24C0CA6E@sympatico.ca... >>>> >>>> >>>>>I highly recommend you spend the overinflated prices at the $tealership >>>>>for them. I have not been able to find aftermarket snaps that are any >>>>>good at all. The rot/rust out really fast. Nothing worse than putting >>>>>a nice fiberglass body on only to have rust streaks from every freakin' >>>>>snap. >>>>> >>>>>Mike >>>>>86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00 >>>>>88 Cherokee 235 BFG AT's >>>>>Canadian Off Road Trips Photos: Non members can still view! >>>>>Jan/06 http://www.imagestation.com/album/pi...?id=2115147590 >>>>>(More Off Road album links at bottom of the view page) >>>>> >>>>>Steve G wrote: >>>>> >>>>> >>>>>>Should this be anything to do myself or take to a upholstery shop? just >>>>>>wanna put a couple over each door on my cj5 to keep material from pulling >>>>>>off of velcro. -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
All times are GMT -4. The time now is 04:19 AM. |
© 2024 MH Sub I, LLC dba Internet Brands