Adding 2003+ front window trim to 2001 TJ
 

I'm in the process of adding the 2003 (and newer) window trim to my
2001 TJ. I have the side pieces on, and slots marked for the top
piece.

I've got the sunvisors here, but need to figure out how they attach to
the jeep.

Anyone have a recent service manual that shows the attachment, or would
mind taking off either the drive or passenger side sun visor and taking
a picture of the mounting surface?

Also the factor bolt used for the sun visors is not available for order
from mopar, so if anyone could describe that I'd appreciate it. It
looks like it should be a torx header, with a collar and finally a
self-tapping screw to go into the frame, but I'm not exactly sure.

Thanks!
--Mark

Re: Adding 2003+ front window trim to 2001 TJ
 

Just curious as to why you would want to do this. I'd rather not have
all that plastic there.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________

fray wrote:
> I'm in the process of adding the 2003 (and newer) window trim to my
> 2001 TJ. I have the side pieces on, and slots marked for the top
> piece.
>
> I've got the sunvisors here, but need to figure out how they attach to
> the jeep.
>
> Anyone have a recent service manual that shows the attachment, or would
> mind taking off either the drive or passenger side sun visor and taking
> a picture of the mounting surface?
>
> Also the factor bolt used for the sun visors is not available for order
> from mopar, so if anyone could describe that I'd appreciate it. It
> looks like it should be a torx header, with a collar and finally a
> self-tapping screw to go into the frame, but I'm not exactly sure.
>
> Thanks!
> --Mark
>

Re: Adding 2003+ front window trim to 2001 TJ
 

Just curious as to why you would want to do this. I'd rather not have
all that plastic there.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________

fray wrote:
> I'm in the process of adding the 2003 (and newer) window trim to my
> 2001 TJ. I have the side pieces on, and slots marked for the top
> piece.
>
> I've got the sunvisors here, but need to figure out how they attach to
> the jeep.
>
> Anyone have a recent service manual that shows the attachment, or would
> mind taking off either the drive or passenger side sun visor and taking
> a picture of the mounting surface?
>
> Also the factor bolt used for the sun visors is not available for order
> from mopar, so if anyone could describe that I'd appreciate it. It
> looks like it should be a torx header, with a collar and finally a
> self-tapping screw to go into the frame, but I'm not exactly sure.
>
> Thanks!
> --Mark
>

Re: Adding 2003+ front window trim to 2001 TJ
 

Just curious as to why you would want to do this. I'd rather not have
all that plastic there.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________

fray wrote:
> I'm in the process of adding the 2003 (and newer) window trim to my
> 2001 TJ. I have the side pieces on, and slots marked for the top
> piece.
>
> I've got the sunvisors here, but need to figure out how they attach to
> the jeep.
>
> Anyone have a recent service manual that shows the attachment, or would
> mind taking off either the drive or passenger side sun visor and taking
> a picture of the mounting surface?
>
> Also the factor bolt used for the sun visors is not available for order
> from mopar, so if anyone could describe that I'd appreciate it. It
> looks like it should be a torx header, with a collar and finally a
> self-tapping screw to go into the frame, but I'm not exactly sure.
>
> Thanks!
> --Mark
>

Re: Adding 2003+ front window trim to 2001 TJ
 

I am doing it because I added the auto-dimming/compass mirror. I had
the wiring hanging there for almost 2 years, before I decided I
couldn't stand it anymore and went this route.

With just the side molding up, it looks _so_ much better then it did.
The only problem is the original sun visors don't fit with the molding,
so I had to get new sun visors.. and now I have to figure out how to
install them.

Re: Adding 2003+ front window trim to 2001 TJ
 

I am doing it because I added the auto-dimming/compass mirror. I had
the wiring hanging there for almost 2 years, before I decided I
couldn't stand it anymore and went this route.

With just the side molding up, it looks _so_ much better then it did.
The only problem is the original sun visors don't fit with the molding,
so I had to get new sun visors.. and now I have to figure out how to
install them.

Re: Adding 2003+ front window trim to 2001 TJ
 

I am doing it because I added the auto-dimming/compass mirror. I had
the wiring hanging there for almost 2 years, before I decided I
couldn't stand it anymore and went this route.

With just the side molding up, it looks _so_ much better then it did.
The only problem is the original sun visors don't fit with the molding,
so I had to get new sun visors.. and now I have to figure out how to
install them.

Re: Adding 2003+ front window trim to 2001 TJ
 

Ah, gotcha. A lot of people consider that mirror fluff, but I like mine.
My XJ doesn't have one and I keep looking up for temp and stuff anyway.
:( The kids like to use the compass/temp too. I just wish they'd
found a less invasive solution to hide the wires. I'm a old CJ guy and
miss the barren interiors and flat dashes.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________


fray wrote:
> I am doing it because I added the auto-dimming/compass mirror. I had
> the wiring hanging there for almost 2 years, before I decided I
> couldn't stand it anymore and went this route.
>
> With just the side molding up, it looks _so_ much better then it did.
> The only problem is the original sun visors don't fit with the molding,
> so I had to get new sun visors.. and now I have to figure out how to
> install them.
>

Re: Adding 2003+ front window trim to 2001 TJ
 

Ah, gotcha. A lot of people consider that mirror fluff, but I like mine.
My XJ doesn't have one and I keep looking up for temp and stuff anyway.
:( The kids like to use the compass/temp too. I just wish they'd
found a less invasive solution to hide the wires. I'm a old CJ guy and
miss the barren interiors and flat dashes.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________


fray wrote:
> I am doing it because I added the auto-dimming/compass mirror. I had
> the wiring hanging there for almost 2 years, before I decided I
> couldn't stand it anymore and went this route.
>
> With just the side molding up, it looks _so_ much better then it did.
> The only problem is the original sun visors don't fit with the molding,
> so I had to get new sun visors.. and now I have to figure out how to
> install them.
>

Re: Adding 2003+ front window trim to 2001 TJ
 

Ah, gotcha. A lot of people consider that mirror fluff, but I like mine.
My XJ doesn't have one and I keep looking up for temp and stuff anyway.
:( The kids like to use the compass/temp too. I just wish they'd
found a less invasive solution to hide the wires. I'm a old CJ guy and
miss the barren interiors and flat dashes.
__________________________________________________ ___________________
2003 TJ Rubicon * 2001 XJ Sport * 1971 Bill Stroppe Baja Bronco

"There is a very fine line between 'hobby' and 'mental illness'."

Pronunciation: 'jEp Function: noun Date: 1940

Etymology: from g. p. (G= 'Government' P= '80 inch wheelbase')
A small general-purpose motor vehicle with 80" wheelbase, 1/4-ton
capacity and four-wheel drive used by the U.S. army in World War II.
__________________________________________________ ___________________


fray wrote:
> I am doing it because I added the auto-dimming/compass mirror. I had
> the wiring hanging there for almost 2 years, before I decided I
> couldn't stand it anymore and went this route.
>
> With just the side molding up, it looks _so_ much better then it did.
> The only problem is the original sun visors don't fit with the molding,
> so I had to get new sun visors.. and now I have to figure out how to
> install them.
>