Jeeps Canada - Jeep Forums

Jeeps Canada - Jeep Forums (https://www.jeepscanada.com/)
-   Jeep Mailing List (https://www.jeepscanada.com/jeep-mailing-list-32/)
-   -   98 GC Hood Latch Won't Open (https://www.jeepscanada.com/jeep-mailing-list-32/98-gc-hood-latch-wont-open-26118/)

Bob Snyder 04-02-2005 06:54 PM

98 GC Hood Latch Won't Open
 
The cable appears to be conencted to the latch mechanism, but there is
little resistance and no release. How do I open the hood to check the
mechanism?



Lee Ayrton 04-03-2005 01:26 PM

Re: 98 GC Hood Latch Won't Open
 
I just had this happen on my `96 Cherokee. There seems to be two common
failure points: Either the cable breaks or, as in my case, the mounting
plate in the middle front edge of the hood pulls away from the hood.

The hood itself is held down by a catch at each leading corner,
controlled by a rod to a bellcrank on the plate in the center. The
cable from the dash goes to the bellcrank. To open the hood each side
must be released. From my Googling at the time it appears that there
two ways to release the hood, either having freakishly long arms that
can reach up from underneath and pull the rods, or by pulling the grill
and headlight buckets out and unbolting the catch.

Me? It was 30 degrees, raining and I don't have a lift. I paid a
dealer $75 to fix it for me.


Bob Snyder wrote:
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?
>
>



Lee Ayrton 04-03-2005 01:26 PM

Re: 98 GC Hood Latch Won't Open
 
I just had this happen on my `96 Cherokee. There seems to be two common
failure points: Either the cable breaks or, as in my case, the mounting
plate in the middle front edge of the hood pulls away from the hood.

The hood itself is held down by a catch at each leading corner,
controlled by a rod to a bellcrank on the plate in the center. The
cable from the dash goes to the bellcrank. To open the hood each side
must be released. From my Googling at the time it appears that there
two ways to release the hood, either having freakishly long arms that
can reach up from underneath and pull the rods, or by pulling the grill
and headlight buckets out and unbolting the catch.

Me? It was 30 degrees, raining and I don't have a lift. I paid a
dealer $75 to fix it for me.


Bob Snyder wrote:
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?
>
>



Lee Ayrton 04-03-2005 01:26 PM

Re: 98 GC Hood Latch Won't Open
 
I just had this happen on my `96 Cherokee. There seems to be two common
failure points: Either the cable breaks or, as in my case, the mounting
plate in the middle front edge of the hood pulls away from the hood.

The hood itself is held down by a catch at each leading corner,
controlled by a rod to a bellcrank on the plate in the center. The
cable from the dash goes to the bellcrank. To open the hood each side
must be released. From my Googling at the time it appears that there
two ways to release the hood, either having freakishly long arms that
can reach up from underneath and pull the rods, or by pulling the grill
and headlight buckets out and unbolting the catch.

Me? It was 30 degrees, raining and I don't have a lift. I paid a
dealer $75 to fix it for me.


Bob Snyder wrote:
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?
>
>



L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 04-03-2005 05:14 PM

Re: 98 GC Hood Latch Won't Open
 
Hi Bob,
Make it a two man operation, one pull the release and the other
try, prying the hood up, just in case the problem is something like shop
left over the latch, jamming it. If not some pictures of it:
http://www.----------.com/hoodLatch.jpg may give an idea as to how to
get past the cable shields.
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 04-03-2005 05:14 PM

Re: 98 GC Hood Latch Won't Open
 
Hi Bob,
Make it a two man operation, one pull the release and the other
try, prying the hood up, just in case the problem is something like shop
left over the latch, jamming it. If not some pictures of it:
http://www.----------.com/hoodLatch.jpg may give an idea as to how to
get past the cable shields.
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?


L.W.(=?iso-8859-1?Q?=DFill?=) Hughes III 04-03-2005 05:14 PM

Re: 98 GC Hood Latch Won't Open
 
Hi Bob,
Make it a two man operation, one pull the release and the other
try, prying the hood up, just in case the problem is something like shop
left over the latch, jamming it. If not some pictures of it:
http://www.----------.com/hoodLatch.jpg may give an idea as to how to
get past the cable shields.
God Bless America, ßill O|||||||O
mailto:--------------------

Bob Snyder wrote:
>
> The cable appears to be conencted to the latch mechanism, but there is
> little resistance and no release. How do I open the hood to check the
> mechanism?


Bob Snyder 04-04-2005 09:39 PM

Re: 98 GC Hood Latch Won't Open
 
Bill,

The picture looks like '99-04.

Is the '98 the same config?

Thanks again.

Bob

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42505CB8.A498956A@cox.net...
> Hi Bob,
> Make it a two man operation, one pull the release and the other
> try, prying the hood up, just in case the problem is something like shop
> left over the latch, jamming it. If not some pictures of it:
> http://www.----------.com/hoodLatch.jpg may give an idea as to how to
> get past the cable shields.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Bob Snyder wrote:
>>
>> The cable appears to be conencted to the latch mechanism, but there is
>> little resistance and no release. How do I open the hood to check the
>> mechanism?




Bob Snyder 04-04-2005 09:39 PM

Re: 98 GC Hood Latch Won't Open
 
Bill,

The picture looks like '99-04.

Is the '98 the same config?

Thanks again.

Bob

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42505CB8.A498956A@cox.net...
> Hi Bob,
> Make it a two man operation, one pull the release and the other
> try, prying the hood up, just in case the problem is something like shop
> left over the latch, jamming it. If not some pictures of it:
> http://www.----------.com/hoodLatch.jpg may give an idea as to how to
> get past the cable shields.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Bob Snyder wrote:
>>
>> The cable appears to be conencted to the latch mechanism, but there is
>> little resistance and no release. How do I open the hood to check the
>> mechanism?




Bob Snyder 04-04-2005 09:39 PM

Re: 98 GC Hood Latch Won't Open
 
Bill,

The picture looks like '99-04.

Is the '98 the same config?

Thanks again.

Bob

"L.W. ("ßill") ------ III" <----------@cox.net> wrote in message
news:42505CB8.A498956A@cox.net...
> Hi Bob,
> Make it a two man operation, one pull the release and the other
> try, prying the hood up, just in case the problem is something like shop
> left over the latch, jamming it. If not some pictures of it:
> http://www.----------.com/hoodLatch.jpg may give an idea as to how to
> get past the cable shields.
> God Bless America, ßill O|||||||O
> mailto:--------------------
>
> Bob Snyder wrote:
>>
>> The cable appears to be conencted to the latch mechanism, but there is
>> little resistance and no release. How do I open the hood to check the
>> mechanism?





All times are GMT -4. The time now is 12:18 AM.


© 2024 MH Sub I, LLC dba Internet Brands

Page generated in 0.05113 seconds with 3 queries