97TJ.blinkers quit working
 

emergency flashers work but the blinkers are dead when I hit the turn signal.
Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

Re: 97TJ.blinkers quit working
 

All electrical circuits are fused. If your hazards work, according to my
schematic, the fuse is good. TJ also shares a common flasher, again
according to my schematic. Do the turn signals light but not flash, or do
they not light at all?

Jerry
"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

All electrical circuits are fused. If your hazards work, according to my
schematic, the fuse is good. TJ also shares a common flasher, again
according to my schematic. Do the turn signals light but not flash, or do
they not light at all?

Jerry
"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

All electrical circuits are fused. If your hazards work, according to my
schematic, the fuse is good. TJ also shares a common flasher, again
according to my schematic. Do the turn signals light but not flash, or do
they not light at all?

Jerry
"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

Out of blinker fluid?
;-)

Seriously I would try swapping the flasher unit with the emergency
flasher unit to see what happens.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Calvin8tor wrote:
>
> emergency flashers work but the blinkers are dead when I hit the turn signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

Re: 97TJ.blinkers quit working
 

Out of blinker fluid?
;-)

Seriously I would try swapping the flasher unit with the emergency
flasher unit to see what happens.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Calvin8tor wrote:
>
> emergency flashers work but the blinkers are dead when I hit the turn signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

Re: 97TJ.blinkers quit working
 

Out of blinker fluid?
;-)

Seriously I would try swapping the flasher unit with the emergency
flasher unit to see what happens.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Calvin8tor wrote:
>
> emergency flashers work but the blinkers are dead when I hit the turn signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

Re: 97TJ.blinkers quit working
 

Could be a side-effect of a spun muffler bearing?

/Peter

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:400425B4.1A0CC642@sympatico.ca...
> Out of blinker fluid?
> ;-)
>
> Seriously I would try swapping the flasher unit with the emergency
> flasher unit to see what happens.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Calvin8tor wrote:
> >
> > emergency flashers work but the blinkers are dead when I hit the turn
signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

Could be a side-effect of a spun muffler bearing?

/Peter

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:400425B4.1A0CC642@sympatico.ca...
> Out of blinker fluid?
> ;-)
>
> Seriously I would try swapping the flasher unit with the emergency
> flasher unit to see what happens.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Calvin8tor wrote:
> >
> > emergency flashers work but the blinkers are dead when I hit the turn
signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

Could be a side-effect of a spun muffler bearing?

/Peter

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:400425B4.1A0CC642@sympatico.ca...
> Out of blinker fluid?
> ;-)
>
> Seriously I would try swapping the flasher unit with the emergency
> flasher unit to see what happens.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Calvin8tor wrote:
> >
> > emergency flashers work but the blinkers are dead when I hit the turn
signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?

Re: 97TJ.blinkers quit working
 

Common flasher unit and fuse?

No more fuse link wires protecting the alternator and headlights?

I didn't think Chrysler could have screwed them up that bad.....

The emergency flashers should have their own flasher unit and their own
fuse so do the signal lights.

On the CJ7 and the Cherokee the turn signals are with the reverse light
and rear window defroster fuse and the emergency flashers are with the
clock and brake light fuse.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Jerry Newton wrote:
>
> All electrical circuits are fused. If your hazards work, according to my
> schematic, the fuse is good. TJ also shares a common flasher, again
> according to my schematic. Do the turn signals light but not flash, or do
> they not light at all?
>
> Jerry
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
> fuse?

Re: 97TJ.blinkers quit working
 

Common flasher unit and fuse?

No more fuse link wires protecting the alternator and headlights?

I didn't think Chrysler could have screwed them up that bad.....

The emergency flashers should have their own flasher unit and their own
fuse so do the signal lights.

On the CJ7 and the Cherokee the turn signals are with the reverse light
and rear window defroster fuse and the emergency flashers are with the
clock and brake light fuse.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Jerry Newton wrote:
>
> All electrical circuits are fused. If your hazards work, according to my
> schematic, the fuse is good. TJ also shares a common flasher, again
> according to my schematic. Do the turn signals light but not flash, or do
> they not light at all?
>
> Jerry
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
> fuse?

Re: 97TJ.blinkers quit working
 

Common flasher unit and fuse?

No more fuse link wires protecting the alternator and headlights?

I didn't think Chrysler could have screwed them up that bad.....

The emergency flashers should have their own flasher unit and their own
fuse so do the signal lights.

On the CJ7 and the Cherokee the turn signals are with the reverse light
and rear window defroster fuse and the emergency flashers are with the
clock and brake light fuse.

Mike
86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
88 Cherokee 235 BFG AT's

Jerry Newton wrote:
>
> All electrical circuits are fused. If your hazards work, according to my
> schematic, the fuse is good. TJ also shares a common flasher, again
> according to my schematic. Do the turn signals light but not flash, or do
> they not light at all?
>
> Jerry
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
> fuse?

Re: 97TJ.blinkers quit working
 

I suppose I have once again been too literal for the group. When I say that
all circuits are fused, that is a generic statement meant to cover fuses,
ckt breakers, and fusible links. They all fuse the ckt. With few
exceptions, one being the starter, all circuits on a vehicle are fused.

So far as the flasher goes, like I said, that was according to the schematic
that I have, which I would happily pass along to the Calvin8tor if he so
wishes. My first impulse was a bad flasher, too, until I saw that. Maybe
my schematic sucks. Dunno.


Jerry

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40044B50.93BF8190@sympatico.ca...
> Common flasher unit and fuse?
>
> No more fuse link wires protecting the alternator and headlights?
>
> I didn't think Chrysler could have screwed them up that bad.....
>
> The emergency flashers should have their own flasher unit and their own
> fuse so do the signal lights.
>
> On the CJ7 and the Cherokee the turn signals are with the reverse light
> and rear window defroster fuse and the emergency flashers are with the
> clock and brake light fuse.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jerry Newton wrote:
> >
> > All electrical circuits are fused. If your hazards work, according to
my
> > schematic, the fuse is good. TJ also shares a common flasher, again
> > according to my schematic. Do the turn signals light but not flash, or
do
> > they not light at all?
> >
> > Jerry
> > "Calvin8tor" <calvin8tor@aol.com> wrote in message
> > news:20040113083356.29482.00002274@mb-m02.aol.com...
> > > emergency flashers work but the blinkers are dead when I hit the turn
> > signal.
> > > Recently ran the battery down unrelated to this. Are the blinkers on a
> > fuse?

Re: 97TJ.blinkers quit working
 

I suppose I have once again been too literal for the group. When I say that
all circuits are fused, that is a generic statement meant to cover fuses,
ckt breakers, and fusible links. They all fuse the ckt. With few
exceptions, one being the starter, all circuits on a vehicle are fused.

So far as the flasher goes, like I said, that was according to the schematic
that I have, which I would happily pass along to the Calvin8tor if he so
wishes. My first impulse was a bad flasher, too, until I saw that. Maybe
my schematic sucks. Dunno.


Jerry

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40044B50.93BF8190@sympatico.ca...
> Common flasher unit and fuse?
>
> No more fuse link wires protecting the alternator and headlights?
>
> I didn't think Chrysler could have screwed them up that bad.....
>
> The emergency flashers should have their own flasher unit and their own
> fuse so do the signal lights.
>
> On the CJ7 and the Cherokee the turn signals are with the reverse light
> and rear window defroster fuse and the emergency flashers are with the
> clock and brake light fuse.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jerry Newton wrote:
> >
> > All electrical circuits are fused. If your hazards work, according to
my
> > schematic, the fuse is good. TJ also shares a common flasher, again
> > according to my schematic. Do the turn signals light but not flash, or
do
> > they not light at all?
> >
> > Jerry
> > "Calvin8tor" <calvin8tor@aol.com> wrote in message
> > news:20040113083356.29482.00002274@mb-m02.aol.com...
> > > emergency flashers work but the blinkers are dead when I hit the turn
> > signal.
> > > Recently ran the battery down unrelated to this. Are the blinkers on a
> > fuse?

Re: 97TJ.blinkers quit working
 

I suppose I have once again been too literal for the group. When I say that
all circuits are fused, that is a generic statement meant to cover fuses,
ckt breakers, and fusible links. They all fuse the ckt. With few
exceptions, one being the starter, all circuits on a vehicle are fused.

So far as the flasher goes, like I said, that was according to the schematic
that I have, which I would happily pass along to the Calvin8tor if he so
wishes. My first impulse was a bad flasher, too, until I saw that. Maybe
my schematic sucks. Dunno.


Jerry

"Mike Romain" <romainm@sympatico.ca> wrote in message
news:40044B50.93BF8190@sympatico.ca...
> Common flasher unit and fuse?
>
> No more fuse link wires protecting the alternator and headlights?
>
> I didn't think Chrysler could have screwed them up that bad.....
>
> The emergency flashers should have their own flasher unit and their own
> fuse so do the signal lights.
>
> On the CJ7 and the Cherokee the turn signals are with the reverse light
> and rear window defroster fuse and the emergency flashers are with the
> clock and brake light fuse.
>
> Mike
> 86/00 CJ7 Laredo, 33x9.5 BFG Muds, 'glass nose to tail in '00
> 88 Cherokee 235 BFG AT's
>
> Jerry Newton wrote:
> >
> > All electrical circuits are fused. If your hazards work, according to
my
> > schematic, the fuse is good. TJ also shares a common flasher, again
> > according to my schematic. Do the turn signals light but not flash, or
do
> > they not light at all?
> >
> > Jerry
> > "Calvin8tor" <calvin8tor@aol.com> wrote in message
> > news:20040113083356.29482.00002274@mb-m02.aol.com...
> > > emergency flashers work but the blinkers are dead when I hit the turn
> > signal.
> > > Recently ran the battery down unrelated to this. Are the blinkers on a
> > fuse?

Re: 97TJ.blinkers quit working
 

"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

If you've used your hazards lately, is the switch all the way over into the
'off' position on the steering column?

Re: 97TJ.blinkers quit working
 

"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

If you've used your hazards lately, is the switch all the way over into the
'off' position on the steering column?

Re: 97TJ.blinkers quit working
 

"Calvin8tor" <calvin8tor@aol.com> wrote in message
news:20040113083356.29482.00002274@mb-m02.aol.com...
> emergency flashers work but the blinkers are dead when I hit the turn
signal.
> Recently ran the battery down unrelated to this. Are the blinkers on a fuse?

If you've used your hazards lately, is the switch all the way over into the
'off' position on the steering column?

Re: 97TJ.blinkers quit working
 

I hear that one.. Took me 15min of messing with mine before I moved the
switch just slightly to the left again to get the signals to work.

Jeremy


"Tirya" <Tirya@spamfree.addy> wrote in message
news:LQ%Mb.47692$I06.286420@attbi_s01...
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?
>
> If you've used your hazards lately, is the switch all the way over into
the
> 'off' position on the steering column?
>
>

Re: 97TJ.blinkers quit working
 

I hear that one.. Took me 15min of messing with mine before I moved the
switch just slightly to the left again to get the signals to work.

Jeremy


"Tirya" <Tirya@spamfree.addy> wrote in message
news:LQ%Mb.47692$I06.286420@attbi_s01...
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?
>
> If you've used your hazards lately, is the switch all the way over into
the
> 'off' position on the steering column?
>
>

Re: 97TJ.blinkers quit working
 

I hear that one.. Took me 15min of messing with mine before I moved the
switch just slightly to the left again to get the signals to work.

Jeremy


"Tirya" <Tirya@spamfree.addy> wrote in message
news:LQ%Mb.47692$I06.286420@attbi_s01...
> "Calvin8tor" <calvin8tor@aol.com> wrote in message
> news:20040113083356.29482.00002274@mb-m02.aol.com...
> > emergency flashers work but the blinkers are dead when I hit the turn
> signal.
> > Recently ran the battery down unrelated to this. Are the blinkers on a
fuse?
>
> If you've used your hazards lately, is the switch all the way over into
the
> 'off' position on the steering column?
>
>