Re: '96 JGC pinion bearing singing and LSD recommendations.
So far as a limited slip differential goes, the clutchless gear-based
Detroit Truetrac is real hard to beat. But depending on which axle is in your JGC, one may or may not be available for it. The JGC's Dana 44 is different from the Wrangler's Dana 44 and while I am not 100% sure, I don't believe Tractech (manufacturer of the Truetrac) makes one for the JGC's Dana 44. The bearing cost won't be much but the labor is probably going to be somewhere between $200 and $300 since the gears will have to be set up, maybe as low as $150 if you avoid the dealer and the installer knows how to set the pinion depth without wasting extra steps.. Jerry SB wrote: > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: '96 JGC pinion bearing singing and LSD recommendations.
So far as a limited slip differential goes, the clutchless gear-based
Detroit Truetrac is real hard to beat. But depending on which axle is in your JGC, one may or may not be available for it. The JGC's Dana 44 is different from the Wrangler's Dana 44 and while I am not 100% sure, I don't believe Tractech (manufacturer of the Truetrac) makes one for the JGC's Dana 44. The bearing cost won't be much but the labor is probably going to be somewhere between $200 and $300 since the gears will have to be set up, maybe as low as $150 if you avoid the dealer and the installer knows how to set the pinion depth without wasting extra steps.. Jerry SB wrote: > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: '96 JGC pinion bearing singing and LSD recommendations.
So far as a limited slip differential goes, the clutchless gear-based
Detroit Truetrac is real hard to beat. But depending on which axle is in your JGC, one may or may not be available for it. The JGC's Dana 44 is different from the Wrangler's Dana 44 and while I am not 100% sure, I don't believe Tractech (manufacturer of the Truetrac) makes one for the JGC's Dana 44. The bearing cost won't be much but the labor is probably going to be somewhere between $200 and $300 since the gears will have to be set up, maybe as low as $150 if you avoid the dealer and the installer knows how to set the pinion depth without wasting extra steps.. Jerry SB wrote: > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB -- Jerry Bransford PP-ASEL N6TAY See the Geezer Jeep at http://members.cox.net/jerrypb/ |
Re: '96 JGC pinion bearing singing and LSD recommendations.
when did they stop using the aluminum housing? (or is it still being used?)
cal "SB" <mrwizard@REMOVE.cablespeed.com> wrote in message news:55bi815pi19pk06qgor6pqejqrcgedq5od@4ax.com... > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB |
Re: '96 JGC pinion bearing singing and LSD recommendations.
when did they stop using the aluminum housing? (or is it still being used?)
cal "SB" <mrwizard@REMOVE.cablespeed.com> wrote in message news:55bi815pi19pk06qgor6pqejqrcgedq5od@4ax.com... > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB |
Re: '96 JGC pinion bearing singing and LSD recommendations.
when did they stop using the aluminum housing? (or is it still being used?)
cal "SB" <mrwizard@REMOVE.cablespeed.com> wrote in message news:55bi815pi19pk06qgor6pqejqrcgedq5od@4ax.com... > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB |
Re: '96 JGC pinion bearing singing and LSD recommendations.
when did they stop using the aluminum housing? (or is it still being used?)
cal "SB" <mrwizard@REMOVE.cablespeed.com> wrote in message news:55bi815pi19pk06qgor6pqejqrcgedq5od@4ax.com... > How much does the average pinion bearing cost to get replaced? > > Also looking for recommendations on LSD since I'm going to have the > whole thing torn apart. Which are the best? Don't want to spend the > money for an Air locker. I only do little offroading, mainly in the > fall and over winter. > > Thanks in advance. > > SB |
Re: '96 JGC pinion bearing singing and LSD recommendations.
I can tell you it's still the aluminum, C-clip POS for '02:
http://www.----------.com/WJdana44.jpg God Bless America, ßill O|||||||O mailto:-------------------- Cal wrote: > > when did they stop using the aluminum housing? (or is it still being used?) > > cal |
Re: '96 JGC pinion bearing singing and LSD recommendations.
I can tell you it's still the aluminum, C-clip POS for '02:
http://www.----------.com/WJdana44.jpg God Bless America, ßill O|||||||O mailto:-------------------- Cal wrote: > > when did they stop using the aluminum housing? (or is it still being used?) > > cal |
Re: '96 JGC pinion bearing singing and LSD recommendations.
I can tell you it's still the aluminum, C-clip POS for '02:
http://www.----------.com/WJdana44.jpg God Bless America, ßill O|||||||O mailto:-------------------- Cal wrote: > > when did they stop using the aluminum housing? (or is it still being used?) > > cal |
All times are GMT -4. The time now is 01:16 AM. |
© 2024 MH Sub I, LLC dba Internet Brands