95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

Hello All,

Thanks for the earlier replies. Here is what we have done so far:

Replaced the three-wire 'speed-sensor' unit on the side of the Automatic
Transmission.

Removed and re-soldered the connector attached to the flexible circuit card
behind the dash.

Still, neither the Speedo/odo or gas gauge is working.

One observation, there are four thin leads that protrude from the un-seeable
side of the flexible circuit card. Is there a component like a voltage
regulator or such that is behind there? If so, is that a part that I can
replace? I did re-solder the four leads.

Please help!

Best regards,

RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

"RG" <rguy@cox.net> wrote in message news:ZIjWc.8027$L94.1454@fed1read07...
> Hello All,
>
> Thanks for the earlier replies. Here is what we have done so far:
>
> Replaced the three-wire 'speed-sensor' unit on the side of the Automatic
> Transmission.
>
> Removed and re-soldered the connector attached to the flexible circuit
card
> behind the dash.
>
> Still, neither the Speedo/odo or gas gauge is working.
>
> One observation, there are four thin leads that protrude from the
un-seeable
> side of the flexible circuit card. Is there a component like a voltage
> regulator or such that is behind there? If so, is that a part that I can
> replace? I did re-solder the four leads.
>
> Please help!
>
> Best regards,
>
> RG



Hello All,

PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
ran the other end of the wire to the chassis. Problem fixed!

Best regards,

RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

"RG" <rguy@cox.net> wrote in message news:ZIjWc.8027$L94.1454@fed1read07...
> Hello All,
>
> Thanks for the earlier replies. Here is what we have done so far:
>
> Replaced the three-wire 'speed-sensor' unit on the side of the Automatic
> Transmission.
>
> Removed and re-soldered the connector attached to the flexible circuit
card
> behind the dash.
>
> Still, neither the Speedo/odo or gas gauge is working.
>
> One observation, there are four thin leads that protrude from the
un-seeable
> side of the flexible circuit card. Is there a component like a voltage
> regulator or such that is behind there? If so, is that a part that I can
> replace? I did re-solder the four leads.
>
> Please help!
>
> Best regards,
>
> RG



Hello All,

PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
ran the other end of the wire to the chassis. Problem fixed!

Best regards,

RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

"RG" <rguy@cox.net> wrote in message news:ZIjWc.8027$L94.1454@fed1read07...
> Hello All,
>
> Thanks for the earlier replies. Here is what we have done so far:
>
> Replaced the three-wire 'speed-sensor' unit on the side of the Automatic
> Transmission.
>
> Removed and re-soldered the connector attached to the flexible circuit
card
> behind the dash.
>
> Still, neither the Speedo/odo or gas gauge is working.
>
> One observation, there are four thin leads that protrude from the
un-seeable
> side of the flexible circuit card. Is there a component like a voltage
> regulator or such that is behind there? If so, is that a part that I can
> replace? I did re-solder the four leads.
>
> Please help!
>
> Best regards,
>
> RG



Hello All,

PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
ran the other end of the wire to the chassis. Problem fixed!

Best regards,

RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

"RG" <rguy@cox.net> wrote in message news:ZIjWc.8027$L94.1454@fed1read07...
> Hello All,
>
> Thanks for the earlier replies. Here is what we have done so far:
>
> Replaced the three-wire 'speed-sensor' unit on the side of the Automatic
> Transmission.
>
> Removed and re-soldered the connector attached to the flexible circuit
card
> behind the dash.
>
> Still, neither the Speedo/odo or gas gauge is working.
>
> One observation, there are four thin leads that protrude from the
un-seeable
> side of the flexible circuit card. Is there a component like a voltage
> regulator or such that is behind there? If so, is that a part that I can
> replace? I did re-solder the four leads.
>
> Please help!
>
> Best regards,
>
> RG



Hello All,

PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
ran the other end of the wire to the chassis. Problem fixed!

Best regards,

RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

Thanks, but didn't Mike Romain tell you that, or did he miss you?
;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

RG wrote:
>
> Hello All,
>
> PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
> back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
> ran the other end of the wire to the chassis. Problem fixed!
>
> Best regards,
>
> RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

Thanks, but didn't Mike Romain tell you that, or did he miss you?
;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

RG wrote:
>
> Hello All,
>
> PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
> back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
> ran the other end of the wire to the chassis. Problem fixed!
>
> Best regards,
>
> RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

Thanks, but didn't Mike Romain tell you that, or did he miss you?
;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

RG wrote:
>
> Hello All,
>
> PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
> back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
> ran the other end of the wire to the chassis. Problem fixed!
>
> Best regards,
>
> RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

Thanks, but didn't Mike Romain tell you that, or did he miss you?
;-)
God Bless America, ßill O|||||||O
mailto:-------------------- http://www.----------.com/

RG wrote:
>
> Hello All,
>
> PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
> back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
> ran the other end of the wire to the chassis. Problem fixed!
>
> Best regards,
>
> RG

Re: 95 Cherokee broken Spedo and Gas Guage, STILL, PLEASE HELP!!
 

LOL!

Man oh man, missed that one.

Mike

"L.W.(ßill) ------ III" wrote:
>
> Thanks, but didn't Mike Romain tell you that, or did he miss you?
> ;-)
> God Bless America, ßill O|||||||O
> mailto:-------------------- http://www.----------.com/
>
> RG wrote:
> >
> > Hello All,
> >
> > PROBLEM SOLVED! The Gauges needed a ground! I connected a wire from the
> > back of the instrument/gauge assembly from the 'LG' screw on the foil CB. I
> > ran the other end of the wire to the chassis. Problem fixed!
> >
> > Best regards,
> >
> > RG