|
93 ZJ rear seat belt REMOVAL, Help
Ok the new puppy decided to get mad while he was sitting in the
wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm with the details on how to go about removing the rear sholder belt (left rear belt)??? Anyone know the size of bolts that I'll need to remove them? Thanks Snow... |
Re: 93 ZJ rear seat belt REMOVAL, Help
I don't know what size the bolts are, but I suggest you go to Sears and buy
a set. Surely you will need some of the others in the set at some point in the future. No point in buying just one. "Snow" <snowbal@sympatico.ca> wrote in message news:1177198068.554695.241780@l77g2000hsb.googlegr oups.com... > Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? > > Thanks > > Snow... > |
Re: 93 ZJ rear seat belt REMOVAL, Help
I don't know what size the bolts are, but I suggest you go to Sears and buy
a set. Surely you will need some of the others in the set at some point in the future. No point in buying just one. "Snow" <snowbal@sympatico.ca> wrote in message news:1177198068.554695.241780@l77g2000hsb.googlegr oups.com... > Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? > > Thanks > > Snow... > |
Re: 93 ZJ rear seat belt REMOVAL, Help
I don't know what size the bolts are, but I suggest you go to Sears and buy
a set. Surely you will need some of the others in the set at some point in the future. No point in buying just one. "Snow" <snowbal@sympatico.ca> wrote in message news:1177198068.554695.241780@l77g2000hsb.googlegr oups.com... > Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? > > Thanks > > Snow... > |
Re: 93 ZJ rear seat belt REMOVAL, Help
I don't know what size the bolts are, but I suggest you go to Sears and buy
a set. Surely you will need some of the others in the set at some point in the future. No point in buying just one. "Snow" <snowbal@sympatico.ca> wrote in message news:1177198068.554695.241780@l77g2000hsb.googlegr oups.com... > Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? > > Thanks > > Snow... > |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? :) I just might. Just a sec and let me go see what fits. -- -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? :) I just might. Just a sec and let me go see what fits. -- -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? :) I just might. Just a sec and let me go see what fits. -- -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Ok the new puppy decided to get mad while he was sitting in the > wifey's ZJ for a short time. Anyone have ideas or pdf copy of the fsm > with the details on how to go about removing the rear sholder belt > (left rear belt)??? > > Anyone know the size of bolts that I'll need to remove them? :) I just might. Just a sec and let me go see what fits. -- -- DougW -- 93 ZJ 4.0 http://revbeergoggles.com HESCO Supercharger - 300W IASCA Stereo - Edelbrock IAS Shocks Gibson Exhaust - rear DCpower - custom gauge install - Stillen Rotors Banks Header - and BEER, in the fridge! |
Re: 93 ZJ rear seat belt REMOVAL, Help
DougW wrote:
> Snow wrote: >> Ok the new puppy decided to get mad while he was sitting in the >> wifey's ZJ for a short time. Anyone have ideas or pdf copy of the >> fsm with the details on how to go about removing the rear sholder >> belt (left rear belt)??? >> >> Anyone know the size of bolts that I'll need to remove them? > > :) I just might. > > Just a sec and let me go see what fits. T-50, both upper and lower bolts. Getting the plastic off is more of a pain but I think it can be done without taking the whole side out. Just watch the edges they tend to be a bit sharp. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
DougW wrote:
> Snow wrote: >> Ok the new puppy decided to get mad while he was sitting in the >> wifey's ZJ for a short time. Anyone have ideas or pdf copy of the >> fsm with the details on how to go about removing the rear sholder >> belt (left rear belt)??? >> >> Anyone know the size of bolts that I'll need to remove them? > > :) I just might. > > Just a sec and let me go see what fits. T-50, both upper and lower bolts. Getting the plastic off is more of a pain but I think it can be done without taking the whole side out. Just watch the edges they tend to be a bit sharp. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
DougW wrote:
> Snow wrote: >> Ok the new puppy decided to get mad while he was sitting in the >> wifey's ZJ for a short time. Anyone have ideas or pdf copy of the >> fsm with the details on how to go about removing the rear sholder >> belt (left rear belt)??? >> >> Anyone know the size of bolts that I'll need to remove them? > > :) I just might. > > Just a sec and let me go see what fits. T-50, both upper and lower bolts. Getting the plastic off is more of a pain but I think it can be done without taking the whole side out. Just watch the edges they tend to be a bit sharp. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
DougW wrote:
> Snow wrote: >> Ok the new puppy decided to get mad while he was sitting in the >> wifey's ZJ for a short time. Anyone have ideas or pdf copy of the >> fsm with the details on how to go about removing the rear sholder >> belt (left rear belt)??? >> >> Anyone know the size of bolts that I'll need to remove them? > > :) I just might. > > Just a sec and let me go see what fits. T-50, both upper and lower bolts. Getting the plastic off is more of a pain but I think it can be done without taking the whole side out. Just watch the edges they tend to be a bit sharp. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
Thanks Doug, knew someone here would have the answers.
The wreckers is have a parts day in a few weeks so I plan on picking one up there, hopefully I can get a gray colored one buy anything will do. The pup won't be too happy in the wife ZJ from now on, I re-installed the dog cage we had for our XJ for the other dog. Cheers. Thanks again Snow.... |
Re: 93 ZJ rear seat belt REMOVAL, Help
Thanks Doug, knew someone here would have the answers.
The wreckers is have a parts day in a few weeks so I plan on picking one up there, hopefully I can get a gray colored one buy anything will do. The pup won't be too happy in the wife ZJ from now on, I re-installed the dog cage we had for our XJ for the other dog. Cheers. Thanks again Snow.... |
Re: 93 ZJ rear seat belt REMOVAL, Help
Thanks Doug, knew someone here would have the answers.
The wreckers is have a parts day in a few weeks so I plan on picking one up there, hopefully I can get a gray colored one buy anything will do. The pup won't be too happy in the wife ZJ from now on, I re-installed the dog cage we had for our XJ for the other dog. Cheers. Thanks again Snow.... |
Re: 93 ZJ rear seat belt REMOVAL, Help
Thanks Doug, knew someone here would have the answers.
The wreckers is have a parts day in a few weeks so I plan on picking one up there, hopefully I can get a gray colored one buy anything will do. The pup won't be too happy in the wife ZJ from now on, I re-installed the dog cage we had for our XJ for the other dog. Cheers. Thanks again Snow.... |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Thanks Doug, knew someone here would have the answers. no problem. > The wreckers is have a parts day in a few weeks so I plan on picking > one up there, hopefully I can get a gray colored one buy anything will > do. May as well remove the old one, or at least get down to the mounting points just to make sure they didn't stick in a different bolt on the spool side. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Thanks Doug, knew someone here would have the answers. no problem. > The wreckers is have a parts day in a few weeks so I plan on picking > one up there, hopefully I can get a gray colored one buy anything will > do. May as well remove the old one, or at least get down to the mounting points just to make sure they didn't stick in a different bolt on the spool side. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Thanks Doug, knew someone here would have the answers. no problem. > The wreckers is have a parts day in a few weeks so I plan on picking > one up there, hopefully I can get a gray colored one buy anything will > do. May as well remove the old one, or at least get down to the mounting points just to make sure they didn't stick in a different bolt on the spool side. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
Snow wrote:
> Thanks Doug, knew someone here would have the answers. no problem. > The wreckers is have a parts day in a few weeks so I plan on picking > one up there, hopefully I can get a gray colored one buy anything will > do. May as well remove the old one, or at least get down to the mounting points just to make sure they didn't stick in a different bolt on the spool side. -- DougW |
Re: 93 ZJ rear seat belt REMOVAL, Help
> The wreckers is have a parts day in a few weeks... Standard Auto Wreckers by any chance? -- Posted via a free Usenet account from http://www.teranews.com |
Re: 93 ZJ rear seat belt REMOVAL, Help
> The wreckers is have a parts day in a few weeks... Standard Auto Wreckers by any chance? -- Posted via a free Usenet account from http://www.teranews.com |
Re: 93 ZJ rear seat belt REMOVAL, Help
> The wreckers is have a parts day in a few weeks... Standard Auto Wreckers by any chance? -- Posted via a free Usenet account from http://www.teranews.com |
Re: 93 ZJ rear seat belt REMOVAL, Help
> The wreckers is have a parts day in a few weeks... Standard Auto Wreckers by any chance? -- Posted via a free Usenet account from http://www.teranews.com |
| All times are GMT -4. The time now is 05:44 PM. |
© 2024 MH Sub I, LLC dba Internet Brands